53.020.30 起重设备附件 标准查询与下载

EN 1677-4:2000+A1:2008 吊索部件.安全.第4部分:铰链,8级

This part of EN 1677 specifies requirements for forged or welded steel master links, intermediate master links, master link assemblies and lower terminal links of grade 8 up to 132 t WLL, mainly for use in: chain slings according to EN 818-4 steel wire rope slings textile slings according to EN 1492-1:2000, EN 1492-2:2000, intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged links. The hazards covered by this Part of EN 1677 are identified in clause 4. Annexes ZA and ZB give the relationship with EU-Directives.

Components for slings - Safety - Part 4: Links, Grade 8

EN 1492-1:2000+A1:2008 纺织吊索.安全.第1部分:专为一般用途的人造纤维扁平编织吊带

This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless sewn flat woven webbing slings, with or without fittings, made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 450 mm inclusive. The flat woven webbing slings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Flat woven webbing slings conforming to this European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide -40°C to 100°C, b) polypropylene -40°C to 80°C . This European Standard does not apply to the types of webbing sling indicated below: a) slings such as bag slings, nets (consisting of several crossed webbings stitched together), "adjustable" slings (containing, for example, intermediate buckles stitched along the webbing), etc.; b) slings made from webbing woven from monofilament yarns; c) slings designed for pre-slinging and intended not to be re-used. This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of flat woven webbing slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

EN 1677-6:2001+A1:2008 吊索部件.安全性 第6部分:链4级

This part of EN 1677 specifies requirements for welded steel master links, intermediate master links, master link assemblies and lower terminal links of grade 4 up to 67 t WLL, mainly for use in: chain slings according to EN 818-5 steel wire rope slings according to prEN 13414-1:1998 textile slings according to EN 1492-1, EN 1492-2, intended for lifting objects, materials or goods. The hazards covered by this Part of EN 1677 are identified in clause 4.

Components for slings - Safety - Part 6: Links - Grade 4

EN 1492-4:2004+A1:2008 纺织吊索.安全.第3部分:专为一般服务的自然和人造纤维制成的提升吊绳绳索

This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless slings, with or without fittings, made of sisal, hemp and manila 3and 4-strand laid construction natural fibre ropes and polyamide, polyester and polypropylene 3- and 4-strand laid construction and 8-strand plaited construction man-made fibre ropes having a reference number in the range of 16 to 48 inclusive. The fibre rope slings covered by this part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Fibre rope slings conforming to this European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide -40°C to 100°C, b) manila, sisal, hemp and polypropylene -40°C to 80°C. This European Standard does not apply to fibre rope sling assemblies rated by the trigonometric method. This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of fibre rope slings when carried out in accordance with the instructions and specification given by the manufacturer or authorized representative.

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

EN 13414-1:2003+A2:2008 钢丝绳吊索的安全.第1部分:通用提升吊索

This European Standard specifies the construction requirements, calculation of WLL, verification, certification and marking of steel wire rope slings for general lifting service. It covers single-, two-, three- and four-leg slings, with ferrule-secured or spliced eye terminations and spliced or ferrule-secured endless slings made from 8 mm to 60 mm diameter 6 strand ordinary lay steel wire rope with fibre or steel core and 8 strand ordinary lay steel wire rope with a steel core conforming to EN 12385-4. The standard assumes a working coefficient (factor of safety) of five. This standard does not cover slings for single use, i.e. one trip slings, having a working coefficient lower than 5. This standard does not cover matched sets of slings with spliced eyes. This document is not applicable to slings which are manufactured before the date of publication of this document by CEN. The hazards covered by this Part of EN 13414 are identified in clause 4. These wire rope slings are intended for lifting objects, materials or goods. Guidance on the information which should be provided with an enquiry or order is given in annex A. NOTE Information for use and maintenance, including operating temperature ranges, is given in Part 2 of this standard.

Steel wire rope slings - Safety - Part 1: Slings for general lifting service

EN 13414-2:2003+A2:2008 钢丝绳吊索的安全.第2部分:用于使用和维修由制造商提供的信息规范

This Part of EN 13414 specifies the information on use and maintenance to be provided by the manufacturer of wire rope slings. NOTE Certain clauses are relevant to component parts and accessories conforming to EN 1677 parts 1 to 6 Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate for general lifting service. The hazards covered by this Part of EN13414 are identified in clause 4.

Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer

LST EN 818-7-2003+A1-2008 起重用短链条 安全 第7部分：精细公差起重链条，T 级（T、DAT 和 DT 型）

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

LST EN 818-3-2001+A1-2008 起重用短链条 安全 第3部分：链式吊索的中公差链条 4 级

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

LST EN 818-2-2001+A1-2008 起重用短链条 安全 第2部分：链条吊索的中公差链条 8 级

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

LST EN 818-4-2001+A1-2008 起重用短链 安全 第4部分：链式吊索 8 级

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

LST EN 818-5-2001+A1-2008 起重用短链 安全 第5部分：链式吊索 4 级

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

LST EN 818-6-2001+A1-2008 起重用短链 安全 第6部分：链条吊索 制造商提供的使用和维护信息规范

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

LST EN 818-1+AC-2000+A1-2008 起重用短链条 安全 第1部分：一般验收条件

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

JT/T 727-2008 集装箱吊具全回转装置

本标准规定了集装箱吊具全回转装置的结构和分类、技术要求、试验方法、检验规则、标志与运输。 本标准适用于集装箱吊具的全回转装置（以下简称全回转装置），其他类型全回转装置可参照使用。

Full revolving device of container spreader

SANS 687:2008 非固定式起重附件的检查及试验

Covers provisions for inspection and testing of non-fixed load-lifting attachments that are in service.

Inspection and testing of non-fixed load-lifting attachments

ISO 16877:2008 提升用短环节链.等级TH、手动节链起重机的精细公差

This International Standard specifies the requirements for Grade TH fine-tolerance hoist chains, for use as load chains in manually operated chain hoists and consisting of round steel short link chains, electrically welded and heat treated, tested to and compliant with the ISO 1834 general conditions of acceptance. NOTE Butt welding and flash butt welding are defined in ISO 4063 The range of nominal sizes of heist chains covered by this International Standard is from 3 mm to 13 mm They are for use in the temperature range 10 ℃ to 280 ℃.

Short link chains for lifting purposes - Grade TH, fine tolerance for manually operated chain hoists

ISO 16872:2008 提升用短环节链.等级VH、手动节链用精细公差

This International Standard specifies the requirements for Grade VH, fine-tolerance hoist chains, for use as lead chains in manually operated chain hoists and consisting of round steel short link chains, electrically welded and heat treated, tested to and compliant with the ISO 1834 general conditions of acceptance NOTE Butt welding and flash butt welding are defined in ISO 4O63 The range of nominal sizes of hoist chains covered by this International Standard is from 3 mm to 13 ram, for use in the temperature range -18 ℃ to 150 ℃.

Short link chains for lifting purposes - Grade VH, fine tolerance for manually operated chain hoists

LST EN 1677-2-2002+A1-2008 吊索部件 安全 第2部分：带闩锁的锻钢吊钩，8 级

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8

LST EN 1677-3-2002+A1-2008 吊索部件 安全 第3部分：锻钢自锁钩 8 级

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8

DIN EN 818-7:2008 升降用短节链条.安全性.第7部分:T级(T型、DAT型和DT型)精密公差吊链

This European Standard specifies the requirements related to safety for hoist chain, Grade T (type T quenched and tempered and types DAT and DT case hardened), for use in serial chain hoists manual and power driven. Type DAT and type DT hoist chains possess surface hardnesses greater than core hardness and are used for power driven chain hoists to offer greater resistance to wear. Type DT hoist chain differs from DAT hoist chain in having higher surface hardness and/or greater case depth to optimise wear resistance. The standard is applicable to electrically welded round steel short link hoist chains conforming to EN 818-1. The range of nominal size of hoist chains covered by this European Standard is from 4 mm to 22 mm. The hazards covered by this European Standard are identified in clause 4.

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)(includes Amendment A1:2008); German version EN 818-7:2002+A1:2008