53.020.30 起重设备附件 标准查询与下载

JB/T 6392-2008 起重机车轮

本标准规定了起重机用圆柱车轮（以下简称车轮）的基本结构型式、尺寸、路面性状以及车轮与钢轨的匹配、技术要求、检验规则、标志和包装等要求。 本标准适用于桥式起重机、门式起重机用的圆柱车轮，其他起重机用的车轮也可参照使用。

Rail wheels for crane

DIN EN 1677-3:2008 吊索部件.安全.第3部分:8级、锻钢自锁紧吊钩

This European Standard specifies requirements for forged steel self-locking lifting hooks of Grade 8 having eye or clevis and pin up to 21,2 t working load limit (WLL), mainly for use in: -- chain slings according to EN 818-4 -- steel wire rope slings according to prEN 13414-1 -- textile slings according to EN 1492-1, EN 1492-2 intended for lifting objects, materials or goods. The hazards covered by this part of EN 1677 are identified in clause 4. Annex A gives the bases for calculation of hook dimensions. Annex B gives an example of a designation systems for hooks of Grade 8.

Components for slings - Safety - Part 3: Forged steel self-locking hooks, Grade 8(includes Amendment A1:2008); English version of DIN EN 1677-3:2008-06

DIN EN 1677-2:2008 吊索部件.安全.第2部分:8级锻钢制带卡齿起重吊钩

This Part of EN 1677 specifies requirements for forged steel lifting hooks with latch of grade 8 having eye or clevis and pin up to 63 t WLL, mainly for use in: -- chain slings according to EN 818-4 -- steel wire rope slings according to prEN 13414-1:1999 -- textile slings according to prEN 1492-1:2000, prEN 1492-2:2000 intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged hooks. The hazards covered by this Part of EN 1677 are identified in clause 4. Annex A is informative, and gives the bases for calculation of hook dimensions. Annex B is informative, and gives an example of a designation system for hooks of grade 8. Annexes ZA and ZB give the relationship with EU-Directives.

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8(includes Amendment A1:2008); English version of DIN EN 1677-2:2008-06

DS/EN 818-1+A1:2008 起重用短链条 安全 第1部分：一般验收条件

This part of EN 818 specifies the general conditions of acceptance related to safety for electrically welded round steel short link chain for lifting purposes. It includes:a) medium tolerance chain for use in chain slings and for general lifting service and;b) fine tolerance chain for use with hoists and other similar lifting appliances.The hazards covered by this Part of EN 818 are identified in clause 4.Annex C gives proposals for clauses covering inspection, inspection marking and steel makers cast analysis which may be included in a form of contract.

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

DS/EN 818-6+A1:2008 起重用短链 安全 第6部分：链条吊索 制造商提供的使用和维护信息规范

This Part of EN 818 specifies the information on use and maintenance to be provided by the manufacturer with chain slings conforming to EN 818-4:1996+A1 and EN 818-5:1999+A1.NOTE Certain clauses are relevant to component parts of chains and accessories conforming to EN 818-2:1996+A1, EN 818-3:1999+A1 and EN 1677.Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate.The hazards covered by this Part of EN 818 are identified in clause 4.

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

DS/EN 818-3+A1:2008 起重用短链条 安全 第3部分：链式吊索的中公差链条 4 级

This part of EN 818 specifies the requirements related to safety for short link chains, grade 4, of medium tolerance for use in chain slings to EN 818-4:1996+A1 and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to !EN 818-1:1996+A1"""", which are intended for lifting objects, materials or goods.The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm.The hazards covered by this Part of EN 818 are identified in clause 4.Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties.Annex B g

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

DS/EN 818-2+A1:2008 起重用短链条 安全 第2部分：链条吊索的中公差链条 8 级

This part of EN 818 specifies the requirements related to safety for short link chains, grade 8, of medium tolerance for use in chain slings according to EN 818-4 and for general lifting purposes. They are electrically welded round steel short link chains, heat treated and tested and complying with the general conditions of acceptance in EN 818-1.The range of nominal sizes of chain covered by this Part of EN 818 is from 4 mm to 45 mm.The hazards covered by this Part of EN 818 are identified in clause 4.The bases for calculation of tabulated values for dimensions, working load limits and mechanical properties are given in annex A.Annex B gives information on

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

DS/EN 818-7+A1:2008 起重用短链条 安全 第7部分：精细公差起重链条，T 级（T、DAT 和 DT 型）

This European Standard specifies the requirements related to safety for hoist chain, Grade T (type T quenched and tempered and types DAT and DT case hardened), for use in serial chain hoists manual and power driven.Type DAT and type DT hoist chains possess surface hardnesses greater than core hardness and are used for power driven chain hoists to offer greater resistance to wear.Type DT hoist chain differs from DAT hoist chain in having higher surface hardness and/or greater case depth to optimise wear resistance.The standard is applicable to electrically welded round steel short link hoist chains conforming to EN 818-1.The range of nominal size of hoist ch

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

DS/EN 818-5+A1:2008 起重用短链 安全 第5部分：链式吊索 4 级

This Part of EN 818 specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings, assembled by welding, using short link grade 4 medium tolerance chain conforming to EN 818-3:1999+A1 together with the appropriate range of components of the same grade in accordance with EN 1677-5:2001+A1 and -6:2001+A1. These chain slings are intended for lifting objects, materials or goods.NOTE Instructions for use and maintenance of chain slings are covered by !EN 818-6:2000+A1"""".The hazards covered by this Part of the standard are identified in clause 4.Annex A gives an alternative method of rati

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

DS/EN 818-4+A1:2008 起重用短链 安全 第4部分：链式吊索 8 级

This European Standard specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings assembled by:a) mechanical joining devices;b) weldingusing short link grade 8 medium tolerance lifting chain conforming to EN 818-2 together with the appropriate range of components of the same grade.The hazards covered by this European Standard are identified in clause 4.Bases for the calculation of working load limits are given in annex B.Annex C gives an example of a designation system for chain slings.

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

DS/EN 1677-3+A1:2008 吊索部件 安全 第3部分：锻钢自锁钩 8 级

This European Standard specifies requirements for forged steel self-locking lifting hooks of Grade 8 having eye or clevis and pin up to 21,2 t working load limit (WLL), mainly for use in:- chain slings according to EN 818-4- steel wire rope slings according to prEN 13414-1- textile slings according to EN 1492-1, EN 1492-2intended for lifting objects, materials or goods.The hazards covered by this part of EN 1677 are identified in clause 4.Annex A gives the bases for calculation of hook dimensions.Annex B gives an example of a designation systems for hooks of Grade 8.

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8

SANS 1640:2008 翻新手动葫芦

Specifies requirements for reconditioned manually operated chain hoists. Reconditioning procedures are also covered.

Reconditioned manually operated chain hoists

DS/EN 1677-2+A1:2008 吊索部件 安全 第2部分：带闩锁的锻钢吊钩，8 级

This Part of EN 1677 specifies requirements for forged steel lifting hooks with latch of grade 8 having eye or clevis and pin up to 63 t WLL, mainly for use in:- chain slings according to EN 818-4- steel wire rope slings according to prEN 13414-1:1999- textile slings according to prEN 1492-1:2000, prEN 1492-2:2000intended for lifting objects, materials or goods.This Part of EN 1677 does not apply to hand forged hooks.The hazards covered by this Part of EN 1677 are identified in clause 4.Annex A is informative, and gives the bases for calculation of hook dimensions.Annex B is informative, and gives an example of a designation system for hooks of grade 8.Anne

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8

SANS 3077:2008 起重用短环链.T级(T型、DAT型以及DT型)高精度葫芦链

Specifies requirements for fine-tolerance hoist chain of Grade T (types T, DAT and DT) for use with manually operated or power-driven chain hoists. Is applicable to electrically welded, round, steel short-link chain, heat-treated and tested in accordance

Short-link chain for lifting purposes - Grade T (types T, DAT and DT), fine-tolerance hoist chain

NF E52-402/A1:2008 起重机.钢丝绳.保养、维修、安装、检查和报废

Cranes - Wire ropes - Care, maintenance, installation, examination and discard.

EN 818-4:1996+A1:2008 起重用短环链.安全.第4部分:吊链.8级

This European Standard specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings assembled by: a) mechanical joining devices; b) welding using short link grade 8 medium tolerance lifting chain conforming to EN 818-2 together with the appropriate range of components of the same grade. The hazards covered by this European Standard are identified in clause 4. Bases for the calculation of working load limits are given in annex B. Annex C gives an example of a designation system for chain slings.

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

EN 818-3:1999+A1:2008 起重用短环链.安全.第3部分:中公差链吊链.4级

This part of EN 818 specifies the requirements related to safety for short link chains, grade 4, of medium tolerance for use in chain slings to EN 818-4:1996+A1 and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1:1996+A1, which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU Directives.

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

EN 818-2:1996+A1:2008 起重用短环链.安全.第2部分:中公差链吊链.8级

This part of EN 818 specifies the requirements related to safety for short link chains, grade 8, of medium tolerance for use in chain slings according to EN 818-4:1996+A1 and for general lifting purposes. They are electrically welded round steel short link chains, heat treated and tested and complying with the general conditions of acceptance in EN 818-1:1996+A1. The range of nominal sizes of chain covered by this Part of EN 818 is from 4 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. The bases for calculation of tabulated values for dimensions, working load limits and mechanical properties are given in annex A. Annex B gives information on weight/metre of chain. Annex C gives an example of a designation system for chains.

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

EN 818-1:1996+A1:2008 起重用短环链.安全.第1部分:一般验收条件

This part of EN 818 specifies the general conditions of acceptance related to safety for electrically welded round steel short link chain for lifting purposes. It includes: a) medium tolerance chain for use in chain slings and for general lifting service and; b) fine tolerance chain for use with hoists and other similar lifting appliances. The hazards covered by this Part of EN 818 are identified in clause 4. Annex C gives proposals for clauses covering inspection, inspection marking and steel makers cast analysis which may be included in a form of contract.

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

EN 1677-2:2000+A1:2008 吊索部件.安全性.第2部分:8级锻钢制带卡齿起重吊钩.技术勘误

This Part of EN 1677 specifies requirements for forged steel lifting hooks with latch of grade 8 having eye or clevis and pin up to 63 t WLL, mainly for use in: chain slings according to EN 818-4 steel wire rope slings according to prEN 13414-1:1999 textile slings according to prEN 1492-1:2000, prEN 1492-2:2000 intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged hooks. The hazards covered by this Part of EN 1677 are identified in clause 4. Annex A is informative, and gives the bases for calculation of hook dimensions. Annex B is informative, and gives an example of a designation system for hooks of grade 8. Annexes ZA and ZB give the relationship with EU-Directives.

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8