53.020.30 起重设备附件 标准查询与下载

KS B ISO 4308-2-2002(2012) 起重机和起重机械钢丝绳的选择第2部分:移动式起重机利用系数

Cranes and lifting appliances－Selection of wire ropes－Part 2：Mobile cranes-Coefficient of utilization

KS B ISO 4308-1-2002(2012) 起重机和起重机械钢丝绳的选择第1部分:总则

Cranes and lifting appliances－Selection of wire ropes－Part 1：General

NF E26-001-7:2002 提升用短节链条.安全性.第7部分:（T型、DAT型和DT型) T 级升降机用小公差链条

Short link chain for lifting purposes - Safety - Part 7 : fine tolerance chain for hoists, Grade T (Types T, DAT and DT).

BS EN 818-7:2002 升降用的短节链条.安全性.精密公差起重吊链、等级T ( 类型T、DAT和 DT )

This European Standard specifies the requirements related to safety for hoist chain, Grade T (type T quenched and tempered and types DAT and DT case hardened), for use in serial chain hoists manual and power driven. Type DAT and type DT hoist chains possess surface hardnesses greater than core hardness and are used for power driven chain hoists to offer greater resistance to wear. Type DT hoist chain differs from DAT hoist chain in having higher surface hardness and/or greater case depth to optimise wear resistance. The standard is applicable to electrically welded round steel short link hoist chains conforming to EN 818-1. The range of nominal size of hoist chains covered by this European Standard is from 4 mm to 22 mm. The hazards covered by this European Standard are identified in clause 4.

Short link chain for lifting purposes - Safety - Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

SANS 3056:1986 非标定的圆钢环提升用链条和链钩．使用和保养

Constitutes a guide to the selection, use, inspection, testing, maintenance and repair of non-calibrated, round steel, short link chains and chain slings, manufactured in accordance with ISO 1834, ISO 1835, ISO 3075, ISO 3076, ISO 4778 and ISO 7593.

Non-calibrated round steel link lifting chain and chain slings - Use and maintenance

ISO 3189-1:1985/cor 1:2002 通用钢丝绳套.第1部分:一般特性和验收条件.技术勘误1

This is Technical Corrigendum 1 to ISO 3189-1-1985 (Sockets for wire ropes for general purposes Part1: General characteristics and conditions of acceptance)

Sockets for wire ropes for general purposes - Part 1: General characteristics and conditions of acceptance; Technical Corrigensdum 1

SANS 50818-6:2000 起重用短环圆钢链条．安全性．第6部分：吊式链锁．生产商提供的用于使用和维修的信息规范

Specifies the information on use and maintenance to be provided by the manufacturer with chain slings that comply with EN 818-4 (published in South Africa as an identical adoption under the designation SANS 50818-4) and EN 818-5.

Short link chain for lifting purposes - Safety Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

ASTM A906/A906M-02(2010) 高架提升设备用的80级和100级合金钢悬链的标准规范

1.1 This specification covers the requirements and method of rating and testing for alloy chain slings. Slings shall be assembled using components manufactured in accordance with Specification A391/A391M for Grade 80 chain, A973/A973M for Grade 100 chain, and A952/A952M for other components. This specification covers welded and mechanically assembled slings. 1.2 This specification does not cover slings used at elevated temperatures (above 400°F [200°C]), in harmful or corrosive environmental conditions or for applications such as nonsymmetrical legs or loading. 1.3 This specification is a performance and assembly specification. Other standards, such as OSHA 1910.184, ASME B30.9, and ASME B30.10, apply to the use of the products in this specification. 1.4 The values stated in either inch-pound units or SI units shall be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore each system shall be used independently of the other, without combining values in any way.

Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

SANS 1640:2002 改装的手动起动机

This standard specifies requirements for reconditioned manually operated chain blocks. Reconditioning procedures are also covered.

Reconditioned manually operated chain blocks

AS 2741:2002 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Specifies requirements for forged shackles. Guidance on information that should be supplied with inquiries and orders and on the care and use of shackles is gievn in Appendices.

Shackles

KS B 6243-2001 起重机用链式吊索

이 규격은 호이스트 등에 사용하는 용접 등의 방법으로 조립된 체인 슬링(이하 “체인 슬링”

Chain slings for lifting purposes

ISO 3077:2001 起重用短环链 T级（T、DAT和DT型），高精度葫芦链

本标准规定了手动葫芦或动力驱动环链葫芦用T级(T、DAT和DT型)高精度葫芦链的要求”。 本标准适用于名义尺寸范围为3 mm～22 mm的圆钢电焊短环链，其热处理和试验按GB／T 20946 规定的验收总则。 注：DAT或DT型以外的T型链条，不仅可用于环链葫芦，也可用于其他起重设备。手动葫芦专用的TH和VH 级链条将在其他标准中规定。

Short-link chain for lifting purposes - Grade T, (types T, DAT and DT), fine-tolerance hoist chain

BS EN 1677-3:2001 吊索的部件.安全性.锻钢自锁吊钩.8级

This European Standard specifies requirements for forged steel self-locking lifting hooks of Grade 8 having eye or clevis and pin up to 21,2t working load limit (WLL), mainly for use in: - chain slings according to EN 818-4 - steel wire rope slings according to prEN 13414-1 - textile slings according to EN 1492-1, EN 1492-2 . intended for lifting objects, materials or goods. The hazards covered by this part of EN 1677 are identified in clause 4. Annex A gives the bases for calculation of hook dimensions. Annex B gives an example of a designation systems for hooks of Grade 8.

Components for slings - Safety - Forged steel self-locking hooks - Grade 8

BS EN 1677-3:2001+A1:2008 吊索的部件 安全性 锻钢自锁吊钩 8级

Components for slings - Safety - Forged steel self-locking hooks - Grade 8

NF E52-037-3:2001 吊索的部件.安全性.第3部分:锻钢制自锁紧吊钩.8级

Components for slings - Safety - Part 3 : forged steel self-locking hooks - Grade 8.

AS 2319:2001 花篮螺丝

Specifies requirements for forged rigging screws and forged turnbuckles used in tension. It does not apply to rigging screws or turnbuckles that are used in compression or are smaller than 10 mm. Guidance on information that should be supplied with enqui

Rigging screws and turnbuckles

EN 1677-3:2001 吊重装置组件.安全.第3部分:自锁的锻钢起吊挂钩,8级;包含修改件A1-2008

This European Standard specifies requirements for forged steel self-locking lifting hooks of Grade 8 having eye or clevis and pin up to 21,2 t working load limit (WLL), mainly for use in:chain slings according to EN 818-4 steel wire rope slings according to prEN 13414-1 textile slings according to EN 1492-1, EN 1492-2 intended for lifting objects, materials or goods.The hazards covered byThis part of EN 1677 are identified in clause 4. Annex A givesThe bases for calculation of hook dimensions. Annex B gives an example of a designation systems for hooks of Grade 8.

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 (Incorporates Amendment A1: 2008)

BS EN 1677-5:2001 吊索元件.安全性.带快卸锁的锻钢制提升吊钩.4级

This part of EN 1677 specifies requirements for forged steel lifting hooks of grade 4 having latch and eye up to 31,5t WLL, mainly for use in: - chain slings according to EN 818-5; - steel wire rope slings according to prEN 13414-1:1998; - textile slings according to EN 1492-1, EN 1492-2; intended for lifting objects, materials or goods. This part of EN 1677 does not apply to hand forged hooks. The hazards covered by this part of EN 1677 are identified in clause 4. Annex A gives the bases for calculation of hook dimensions. Annex B gives an example of a designation system for hooks of grade 4.

Components for slings - Safety - Forged steel lifting hooks with latch - Grade 4

BS EN 1677-6:2001+A1:2008 吊索组件的安全性.第5部分:4级链环

This part of EN 1677 specifies requirements for welded steel master links, intermediate master links, master link assemblies and lower terminal links of grade 4 up to 67 t WLL, mainly for use in:  chain slings according to EN 818-5  steel wire rope slings according to prEN 13414-1:1998  textile slings according to EN 1492-1, EN 1492-2. intended for lifting objects, materials or goods. The hazards covered by this Part of EN 1677 are identified in clause 4.

Components for slings - Safety - Part 6: Links — Grade 4

BS EN 1677-5:2001+A1:2008 吊索元件的安全性.第5部分:有闩锁的锻压钢提升钩4级

This Part of EN 1677 specifies requirements for forged steel lifting hooks of grade 4 having latch and eye up to 31,5 t WLL, mainly for use in:  chain slings according to EN 818-5  steel wire rope slings according to prEN 13414-1:1998  textile slings according to EN 1492-1, EN 1492-2. intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged hooks. The hazards covered by this Part of EN 1677 are identified in clause 4. Annex A gives the bases for calculation of hook dimensions. Annex B gives an example of a designation system for hooks of grade 4.

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch — Grade 4