53.020.30 起重设备附件 标准查询与下载

BS EN 1492-1:2000 纺织吊索.安全性.一般用途的人造纤维的单层机织织带吊索

This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless sewn flat woven webbing slings, with or without fittings, made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 450 mm inclusive. The flat woven webbing slings covered by this part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Flat woven webbing slings conforming to this European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide -40 ℃ to 100 ℃; b) polypropylene -40 ℃ to 80 ℃. This European Standard does not apply to the types of webbing sling indicated below: a) slings such as bag slings, nets (consisting of several crossed webbings stitched together), 'adjustable' slings (containing, for example, intermediate buckles stitched along the webbing), etc.; b) slings made from webbing woven from monofilament yarns; c) slings designed for pre-slinging and intended not to be re-used. This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of flat woven webbing slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

Textile slings - Safety - Flat woven webbing slings, made of man-made fibres, for general purpose use

BS EN 1492-2:2000 纺织吊索.安全性.一般用途的人造纤维的圆吊索

This European Standard specifies the requirements related to safety, including methods of rating and testing roundslings up to 40 tonnes working load limit (in straight lift) and two-, three-, and four-leg roundsling assemblies, with or without fittings, made of polyamide, polyester and polypropylene. The roundslings covered by this part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or WLL's specified. Lifting operations not covered by this standard include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Roundslings conforming to this European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide: -40 ℃ to 100 ℃; b) polypropylene: -40 ℃ to 80 ℃. This European Standard does not apply to the types of roundsling indicated below: a) roundslings designed for securing or lashing of cargoes to each other on pallets and platforms or in vehicles; b) slings of tubular webbing without filling. This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of roundslings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

Textile slings - Safety - Roundslings, made of man-made fibres, for general purpose use

BS EN 1492-2:2000+A1:2008 织物吊索.安全性.第2部分:一般用途人造纤维制圆吊索

Textile slings - Safety - Part 2:Roundslings, made of man-made fibres, for general purpose use

EN 1492-2:2000 纺织吊索.安全.第2部分:通用人造化学纤维制圆吊索;包含修改件A1-2008

This European Standard specifies the requirements related to safety, including methods of rating and testing roundslings up to 40 tonnes working load limit (in straight lift) and two-, three-, and four-leg roundsling assemblies, with or without fittings, made of polyamide, polyester and polypropylene. The roundslings covered byThis part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or WLL's specified. Lifting operations not covered byThis standard include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Roundslings conforming toThis European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide:-40℃ to 100℃, b) polypropylene:-40℃ to 80℃.This European Standard does not apply to the types of roundsling indicated below: a) roundslings designed for securing or lashing of cargoes to each other on pallets and platforms or in vehicles; b) slings of tubular webbing without filling.This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of roundslings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use (Incorporates Amendment A1: 2008)

BS EN 818-6:2000+A1:2008 起重用短环节链.安全性.链式吊索.厂商提供的使用和维护信息规范

This Part of EN 818 specifies the information on use and maintenance to be provided by the manufacturer with chain slings conforming to EN 818-4-1996+A1 and EN 818-5-1999+A1. NOTE Certain clauses are relevant to component parts of chains and accessories conforming to EN 818-2-1996+A1, EN 818-3-1999+A1 and EN 1677. Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate. The hazards covered by this Part of EN 818 are identified in clause 4.

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

BS EN 818-6:2000 提升用短节链条.安全性.链式吊索.制造商提供的使用和维护信息的规范

This part of EN 818 specifies the information on use and maintenance to be provided by the manufacturer with chain slings conforming to EN 818-4 and EN 818-5. NOTE Certain clauses are relevant to component parts of chains and accessories conforming to EN 818-2, EN 818-3 and EN 1677. Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate. The hazards covered by this part of EN 818 are identified in clause 4.

Short link chain for lifting purposes - Safety - Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

NF E26-001-6:2000 升降用短节链.安全.第6部分:链式吊索.由生产商提供的使用和维修的信息规范

Short link chain for lifting purposes - Safety - Part 6 : chain slings - Specification for information for use and maintenance to be provided by the manufacturer.

EN 818-6:2000 起重用短扁节链条.安全.第6部分:吊链.生产商提供的使用和维护的信息规范;包含修改件A1-2008年4月

This part of EN 818 specifies the information on use and maintenance to be provided byThe manufacturer with chain slings conforming to EN 818-4:1996+A1 and EN 818-5:1999+A1. NOTE Certain clauses are relevant to component parts of chains and accessories conforming to EN 818-2:1996+A1, EN 818-3:1999+A1 and EN 1677. Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate.The hazards covered byThis part of EN 818 are identified in clause 4.

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer (Incorporates Amendment A1: 2008)

EN 1677-4:2000 吊重装置组件.安全.第4部分:8级铰链;包含修改件A1-2008

This part of EN 1677 specifies requirements for forged or welded steel master links; intermediate master links; master link assemblies and lower terminal links of grade 8 up to 132 t WLL; mainly for use in: chain slings according to EN 818-4 steel wire rope slings textile slings according to EN 1492-1:2000; EN 1492-2:2000; intended for lifting objects; materials or goods.This part of EN 1677 does not apply to hand forged links. The hazards covered byThis part of EN 1677 are identified in clause 4. Annexes ZA and ZB give the relationship with EU-Directives.

Components for slings - Safety - Part 4: Links, Grade 8 (Incorporates Amendment A1: 2008)

ASME B30.10-2000 吊钩

Hooks

ASME B30.9c Addenda-2000 悬带.附录

Slings; Addenda

ISO 1834:1999 起重用短环链 验收总则

本标准规定了起重用电焊圆钢短环链的验收总则。包括吊链和一般起重用的普通精度链条，以及 环链葫芦和其他类似起重设备用的高精度链条。

Short link chain for lifting purposes - General conditions of acceptance

BS EN 818-3:1999+A1:2008 起重用短环节链.安全性.链式吊索用中等公差链.4级

This part of EN 818 specifies the requirements related to safety for short link chains, grade 4, of medium tolerance for use in chain slings to EN 818-4:1996+A1 and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1:1996+A1, which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU Directives.

Short link chain for lifting purposes - Safety -Part 3: Medium tolerance chain for chain slings - Grade 4

BS EN 818-5:1999+A1:2008 起重用短环节链.安全性.链式吊索.4级

This Part of EN 818 specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings, assembled by welding, using short link grade 4 medium tolerance chain conforming to EN 818-3:1999+A1 together with the appropriate range of components of the same grade in accordance with EN 1677-5:2001+A1 and -6:2001+A1. These chain slings are intended for lifting objects, materials or goods. NOTE Instructions for use and maintenance of chain slings are covered by EN 818-6:2000+A1. The hazards covered by this Part of the standard are identified in clause 4. Annex A gives an alternative method of rating and marking a chain sling for a specific lifting application. Annex B contains the bases for calculation of working load limits. Annex C gives an example of a designation system for chain slings. Annex D gives an example of identification tags for chain slings. Annexes ZA and ZB give the relationship with EU Directives.

Short link chain for lifting purposes - Safety -Part 5: Chain slings - Grade 4

BS EN 818-5:1999 升降用短节链条.安全性.链式吊索.4级

This part of EN 818 specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings, assembled by welding, using short link grade 4 medium tolerance chain conforming to EN 818-3 together with the appropriate range of components of the same grade in accordance with prEN 1677-5 and -6. These chain slings are intended for lifting objects, materials or goods. NOTE Instructions for use and maintenance of chain slings are covered by prEN 818-6. The hazards covered by this part of the standard are identified in clause 4. Annex A gives an alternative method of rating and marking a chain sling for a specific lifting application. Annex B contains the bases for calculation of working load limits. Annex C gives an example of a designation system for chain slings. Annex D gives an example of identification tags for chain slings. Annex ZA gives the relationship with EU Directives.

Short link chain for lifting purposes - Safety - Chain slings - Grade 4

BS EN 818-3:1999 升降用短节链条.安全性.吊索用的中等公差链条.4级

This part of EN 818 specifies the requirements related to safety for short link lifting chains, grade 4, of medium tolerance for use in chain slings and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1, which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this part of EN 818 is from 7 mm to 45 mm. The hazards covered by this part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU Directives.

Short link chain for lifting purposes - Safety - Medium tolerance chain for chain slings - Grade 4

NF E26-001-5:1999 升降用短节链.安全.第5部分:吊链.4号

Short link chain for lifting purposes. Safety. Part 5 : chain slings. Grade 4.

NF E26-001-3:1999 升降用短节链.安全.第3部分:吊链的中等公差链.4号

Short link chain for lifting purposes. Safety. Part 3 : medium tolerance chain for chain slings. Grade 4.

JB/T 8110.1-1999 起重机.弹簧缓冲器

本标准规定了弹簧缓冲器的结构型式、基本参数及技术要求等内容。 本标准主要适用于桥式、门式起重机，也可用于其他起重机。

Spring buffer for crane

JB/T 8108.2-1999 起重用短环链.用于葫芦和其他起重设备的 T (8) 级校准链条

本标准规定了T级起重链的要求。此起重链经过精确校准，用于葫芦和类似设备的承载链。链条是由圆钢电焊成的短环链组成，并经充分热处理和试验，符合JB/T 8108.1的规定。 本标准包括的链条尺寸范围为4～20mm，附录A(标准的附录)给出了6～19mm的暂用附加尺寸范围。

Short link chain for lifting purposes.Grade T(8),calibrated,for chain hoists and other lifting appliances