53.020.30 起重设备附件 标准查询与下载

JB/T 8108.1-1999 起重用短环链.验收总则

本标准规定了起重用电焊圆钢短环链的验收总则。包括用于起重机、吊链和作-般起重用的非校准链条，以及葫芦和其他起重设备用的校准链条。表面淬火的链条不属于本标准的规定范围。

Short link chain for lifting purposes.General conditions of acceptance

JB/T 8112-1999 一般起重用锻造卸扣.D型卸扣和弓形卸扣

本标准规定了M(4)、s(6)和T(8)级，极限工作载荷0.63～100tD形和弓形卸扣的-般特性、性能以及与其他零件互换配合所必需的关键尺寸。 D形卸扣与锻造吊钩配合使用时，可采用-中间部件作连接用。

Forged shackles for general lifting purposes.Dee shackles and bow shackles

JB/T 8110.2-1999 起重机.橡胶缓冲器

本标准规定了橡胶缓冲器的结构型式、基本参数及技术要求等内容。 本标准主要适用于桥式、门式起重机，也可用于其他起重机。

Rubber buffer for cranes

JB/T 4207.1-1999 手动起重设备用吊钩

　　本标准规定了手动起重设备用锻造吊钩的级别、额定起重量、尺寸、一般特性和检验新吊钩的试验方法。 本标准主要适用于起重能力25t以下手动起重设备用的自由锻和模锻吊钩。

Hooks for manually operated lifting equipment

EN 818-3:1999 起重用短扁节链条.安全.第3部分:吊链用中等公差链条.等级4;包含修改件A1-2008年4月

This part of EN 818 specifies the requirements related to safety for short link chains, grade 4, of medium tolerance for use in chain slings to EN 818-4:1996+A1 and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1:1996+A1, which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered byThis part of EN 818 is from 7 mm to 45 mm. The hazards covered byThis part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU Directives.

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 (Incorporates Amendment A1: 2008)

EN 818-5:1999 起重用短扁节链条.安全.第5部分:吊链.等级4号;包含修改件A1-2008年4月

This part of EN 818 specifies the requirements related to safety; methods of rating and testing of single-; two-; three-; four-leg and endless chain slings; assembled by welding; using short link grade 4 medium tolerance chain conforming to EN 818-3:1999+A1 together with the appropriate range of components of the same grade in accordance with EN 1677-5:2001+A1 and EN 1677-6:2001+A1. These chain slings are intended for lifting objects; materials or goods. NOTE Instructions for use and maintenance of chain slings are covered by EN 818-6:2000+A1. The hazards covered byThis part of the standard are identified in clause 4. Annex A gives an alternative method of rating and marking a chain sling for a specific lifting application. Annex B contains the bases for calculation of working load limits. Annex C gives an example of a designation system for chain slings. Annex D gives an example of identification tags for chain slings. Annexes ZA and ZB give the relationship with EU Directives.

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 (Incorporates Amendment A1: 2008)

JIS B 8812:1999 链式提升机用扁节链

Link chain for chain hoists

SR 1944-4-1999 起重设备．锻造带轴简易单钩．第4部分：圆顶螺绞

Prezentul standard stabile?te elementele geometrice ale formei constructive, condi?iile dimensionale ?i condi?iile tehnice de execu?ie ale filetuiui rotund de la tijele ?i piuli?ele c?rligelor simple forjate, utilizate la instala?iile de ridicat.

Hoisting equipments - Forged single hooks with shank - Part 4: Knuckle threads

SR 1944-3-1999 起重设备．锻造带轴简易单钩．第3部分：带有螺纹的机加工握柄的吊钩

Prezentul standard stabile?te condi?iile tehnice dimensionale ?i formele constructive ale c?rligelor simple cu tija prelucrat?, forjate liber sau ?n matri??, utilizate la dispozitivele de ridicare a sarcinilor (mufle etc) sau la leg?turile deta?abile de r

Hoisting equipments - Forged single hooks with shank - Part 3: Hooks with machined shank with tread

ASME B30.10-1999 吊钩

Hooks

SR 1944-2-1999 起重设备．锻造带轴简易单钩．第2部分：锻造毛坯轴钩

Prezentul standard stabile?te condi?iile tehnice dimensionale ?i formele constructive ale semifabricatelor (pieselor brute), forjate liber sau ?n matri??, pentru c?rligele simple cu tij? utilizate ia dispozitivele de ridicare a sarcinilor (mufle etc.) din

Hoisting equipments - Forged single hooks with shank - Part 2: Forged hooks with unmachined shank

SR 1944-1-1999 起重设备．带有握柄的锻造单吊钩．第1部分：材料、制作和交付的技术条件

Prezentul standard stabile?te condi?iile tehnice pentru materiale, execu?ie, verific?ri ?i livrare pentru c?rlige simple forjate cu tij? utilizate la mecanismele de ridicare ale instala?iilor de ridicat; c?rligele fac parte din dispozitivele de ridicare a

Hoisting equipments - Forged single hooks with shank-Part 1: Technical conditions for materials, fabrication and delivery

JIS B 8816:1998 卷扬用链式吊索

Chain slings for lifting purposes

BS 1692:1998 起重滑车规范

This British Standard specifies the design, construction and testing of fibre rope gin blocks for the hoisting and lowering of loads up to 250 kg.

Specification for gin blocks

ASME B30.9b Addenda-1998 悬带.附录

Slings; Addenda

AS 4497.2:1997 圆吊索 人造纤维 维护和使用

Sets out recommended practices for the care and use of roundslings, but does not consider repairs to the load-bearing core of roundslings or the use of roundslings for the lifting of personnel.

Roundslings - Synthetic fibre - Care and use

AS 1353.1:1997 提升用扁平吊带 产品规范

Specifies requirements for flat synthetic-webbing slings that are intended for lifting purposes. It does not apply to slings that have been repaired. Guidance on information that should be supplied with enquiries and orders is given in an Appendix.

Flat synthetic-webbing slings - Product specification

AS 1353.2:1997 提升用扁平吊带 使用和维护

Sets out recommended practices for the care and use of flat synthetic-webbing slings, but does not consider repairs to such slings or the use of such slings for the lifting of personnel.

Flat synthetic-webbing slings - Care and use

AS 4497.1:1997 圆吊索 人造纤维 产品规范

Specifies requirements for roundslings made of synthetic fibre that are intended for lifting purposes. It does not apply to slings that have been repaired. Guidance on information that should be supplied with enquiries and orders is given in an appendix.

Roundslings - Synthetic fibre - Product specification

BS EN 818-2:1996+A1:2008 起重用短环节链.安全性.链式吊索用中等公差链.8级

This part of EN 818 specifies the requirements related to safety for short link chains, grade 8, of medium tolerance for use in chain slings according to EN 818-4-1996+A1 and for general lifting purposes. They are electrically welded round steel short link chains, heat treated and tested and complying with the general conditions of acceptance in EN 818-1-1996+A1. The range of nominal sizes of chain covered by this Part of EN 818 is from 4 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. The bases for calculation of tabulated values for dimensions, working load limits and mechanical properties are given in annex A. Annex B gives information on weight/metre of chain. Annex C gives an example of a designation system for chains.

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8