53.020.99 其他起重设备 标准查询与下载

ASME HST-2-1999 手链式人工操作链式起重机的性能标准

This Standard establishes performance requirements for hand chain manually operated chain hoists for vertical lifting service involving material handling of freely suspended (unguided) loads using welded link type load chain as a lifting medium with one of the following types of suspension: (1) hook or clevis; (1) trolley. It is applicable to hoists manufactured after the date on which this Standard is issued. Differential pulley and self-locking worm drive type hoists are not covered in this Standard. It is not applicable to: (1) damaged or malfunctioning hoists; (2) hoists that have been misused and abused (3) hoists that have been altered without authorization of the manufacturer or a qualified person; (4) hoists used for lifting or supporting people; (5) hoists used for the purpose of drawing both the load and the hoist up or down the hoist's own wire rope; and (6) hoists used for marine and other applications as required by the Department of Defense (DOD). The standard includes an appendix on Hand Chain Manually Operated Chain Hoists used in marine and other applications as required by the Department of Defense (DOD).

Performance Standard for Hand Chain Manually Operated Chain Hoists

ANSI/ASME HST-4M-1999 桥式起重机性能标准

Establishes performance requirements for electric wire rope hoists for vertical lifting service involving material handling of freely suspended (unguided) loads using wire rope with one of the following types of suspension:(1) lug;(2) hook;(3) trolley;(4) base or deck mounted (does not include base mounted drum hoists of the type covered by ASME B30.7);(5) wall or ceiling mounted (does not include base mounted drum hoists of the type covered by ASME B30.7).

Performance Standard for Overhead Electric Wire Rope Hoists

ARMY MIL-T-52953 C NOTICE 3-1998 2000-3000-4000-6000磅.电动马达驱动剪叉式升降车

This commercial item description covers brown kraft paper used for general wrapping applications.

TRUCKS, LIFT, FORK, ELECTRIC MOTOR DRIVEN, 2000-3000-4000-6000 POUND CAPACITY, GENERAL SPECIFICATION FOR

ARMY MIL-T-52698 A NOTICE 3-1998 2000及2500磅.电气跨式起重运输机及剪叉式升降机

This commercial item description covers brown kraft paper used for general wrapping applications.

TRUCKS, LIFT, FORK, TIERING, WALKIE, STRADDLE TYPE, ELECTRIC, 2,000-AND 2,500-POUNDS

ARMY MIL-T-52930 B NOTICE 3-1998 4000/3000磅.安有前装/侧装式装座位的剪叉式升降机

This notice should be filed in fi-ont of MIL-T-52930B, dated 24 May 1982.

TRUCK, LIFT, FORK, ELECTRIC, FRONT/SIDE LOADING SIT-DOWN, 4000/3000-POUND CAPACITY

NF E52-612:1998 提升工作台的安全要求(EN 1570)

Safety requirements for lifting tables.

CAN/CSA-Z323.5-1998(R2003) 人员机械/机电提升装置

1. Scope 1.1 This Standard specifies safety requirements for mechanical/electromechanical devices used in the lifting and moving of persons. It includes requirements for design, construction, maintenance, and use of such equipment and accessories, particularly where these are related to the safety of the person being lifted and the operator of the equipment. 1.2 This Standard provides (a) manufacturers, suppliers, and end users with performance specifications for lifting devices, with the intent of reducing the possible risk of musculoskeletal and other injuries to persons who are either operating the device or being lifted; and (b) guidance regarding the safe functioning, proper maintenance, and adequate labelling of lifting devices. 1.3 This Standard is not intended to supersede federal and provincial occupational health and safety acts and other regulations and legislation. Note: Variations may exist in each province and territory. 1.4 In this Standard, "shall" indicates a mandatory requirement; "should" indicates a recommendation, or that which is advised but not mandatory. Notes accompanying Clauses do not include mandatory or alternative requirements. The purpose of a Note accompanying a Clause is to separate from the text explanatory or informative material that is not properly a part of the Standard. Notes to Figures and Tables are considered to be a part of the Figure or Table and are written as mandatory requirements.

Mechanical/Electromechanical Lifting Devices for Persons

ARMY MIL-S-52159 C NOTICE 3-1998 0.625英寸X英尺链上有特别钩环的多钩吊链

This notice should be filed in front of MILS-52159C, dated 02 February 1994.

SLING, MULTIPLE LEG, .625 INCH BY 6-FOOT CHAIN, WITH SPECIAL HOOKS AND RING

ARMY MIL-T-52176 B NOTICE 1-1998 起重机-挖掘机的铲斗及铲用的挑顶表面锯齿(点.杆.水闸看管员)

This notice should be filed in front of MIL-T-52176BY dated 26 February 1976.

TEETH, SURFACE RIPPING; (POINTS, SHANKS, KEEPERS AND KEEPER LOCKS), BUCKET AND DIPPER, CRANE- SHOVEL

ARMY MIL-T-780 E NOTICE 1-1998 气动活塞锤式捣固机

This notice should be filed in fiont of MTL-T-780E, dated 30 April 1975.

TAMPER, PISTON-HAMMER TYPE, PNEUMATIC

DLA MIL-R-3241 E NOTICE 1-1998 (卷车DR-5( ),DR-7( ),DR-8( ) RC-453( )/G,RL-159( )/U)缆索卷筒

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

REEL, CABLE (REELS DR-5( ), DR-7( ), DR-8( ) RC-453( )/G, RL-159( )/U)

DLA MIL-R-55566 C NOTICE 1-1998 RC-435( ) /U缆索卷筒

This notice should be filedin front of MIL-R-55566C dated 11 AUGUST 1986.

REEL, CABLE, RC-435 ( ) /U

CAN/CSA-Z271-1998(R2004) 悬挂式升降平台安全规范

1. Scope 1.1 This Standard applies to the design, construction, installation, operation, inspection, test, maintenance, alteration, and repair of suspended elexating platforms designed to carry personnel for the purpose of gaining access to exterior and interior building surfaces and other structures.

Safety Code for Suspended Elevating Platforms

CAN/CSA-Z271-1998(C2004) 悬挂式平台升降机安全规则

1. Domaine d'application 1.1 Cette norme vise la conception, la construction, l'installation, le fonctionnement, l'inspection, la mise à l'essai, l'entretien, la modification et la réparation des plates-formes élévatrices suspendies qu'utilisent les ouvriers pour avoir accès aux surfaces externes et internes de bâtiments et autres structures. 1.2 Cette norme vise également les plates-formes manuelles et les sellettes. 1.3 Cette norme ne vise pas les plates-formes ponts à appuis multiples. 1.4 Cette norme ne vise pas les dispositifs de contrôle de descente.

Safety Rules for Suspended Platform Lifts

BS EN 1495:1997+A2:2009 升降平台.支架爬升工作平台

This standard specifies the special safety requirements for Mast Climbing Work Platforms (MCWP) which are temporarily installed and are manually or power operated and which are designed to be used by one or more persons from which to carry out work. The vertical moving components (work platform) are also used to move those same persons and their equipment and materials to and from a single boarding point. These restrictions differentiate MCWPs from Builder's hoists. The standard can also be used for permanently installed MCWP.

Lifting platforms - Mast climbing work platforms

BS EN 1495+A2:1998 升降平台 支架爬升工作平台

Lifting platforms. Mast climbing work platforms

BS EN 1495:1998 升降平台.支架爬升工作平台

1 This standard specifies the special safety requirements for mast climbing work platforms (MCWP) which are temporarily installed and are manually or power operated and which are designed to be used by one or more persons from which to carry out work. The vertical moving components (work platform) are also used to move those same persons and their equipment and materials to and from a single boarding point. These restrictions differentiate MCWPs from builder's hoists. The standard can also be used for permanently installed MCWP. 2 This standard is applicable to work platforms elevated by rack and pinion and guided by and moving along their supporting masts, where the masts may or may not require lateral restraint from separate supporting structures. 3 This standard is applicable to any combination of the following alternatives: —one or more masts; —mast tied or untied; —mast of fixed or variable length; —masts vertical or inclined between 0°and 30°to the vertical: —masts which are standing or hanging; —movable or static base (chassis, or base frame); —manually or power operated elevation: —towed or self powered ground travel on site, excluding road traffic regulation requirements; —driven using electric, pneumatic or hydraulic motors. 4 This standard identifies the hazards arising during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards and for the use of safe working practices. 5 This standard does not specify the requirements for dealing with the hazards involved in the manoeuvring, erection or dismantling, fixing or removing of any materials or equipment which are not part of the mast climbing work platform (MCWP). Neither does it deal with the handling of specific hazardous materials. 6 This standard does not specify the requirements for delivering persons and materials to fixed landing levels. Such equipment is referred to as lifts or hoists and is dealt with by other standards. 7 This standard does not include mobile elevating work platforms (MEWPs) according to prEN 280, suspended access equipment according to prEN 1808 or lifting tables according to prEN 1570.

Lifting platforms - Mast climbing work platforms

ASME B30.21c Addenda-1998 手动操作杆式提升机.附册

Manually lever operated hoists; Addenda

ASME B30.1-1998 千斤顶

Jacks

NF E52-611:1997 提升平台.桅杆攀爬工作平台(EN 1495)

Lifting platforms - Mast climbing work platforms.