53.020.99 其他起重设备 标准查询与下载

EN 1495:1997 升降平台.桅杆攀爬工作平台;包含修改件A2-2009

This standard specifies the special safety requirements for Mast Climbing Work Platforms (MCWP) which are temporarily installed and are manually or power operated and which are designed to be used by one or more persons from which to carry out work. The vertical moving components (work platform) are also used to move those same persons and their equipment and materials to and from a single boarding point. These restrictions differentiate MCWPs from Builder's hoists. The standard can also be used for permanently installed MCWP. This standard is applicable to work platforms elevated by rack and pinion and guided by and moving along their supporting masts, where the masts may or may not require lateral restraint from separate supporting structures. This standard is applicable to any combination of the following alternatives: One or more masts; Mast tied or untied; Mast of fixed or variable length; Masts vertical or inclined between 0° and 30° to the vertical; Masts which are standing or hanging; Movable or static base (chassis, or base frame); Manually or power operated elevation; Towed or self powered ground travel on site, excluding road traffic regulation requirements; Driven using electric, pneumatic or hydraulic motors. This standard identifies the hazards arising during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards and for the use of safe working practices. This standard does not specify the requirements for dealing with the hazards involved in the manoeuvring, erection or dismantling, fixing or removing of any materials or equipment which are not part of the Mast Climbing Work Platform (MCWP). Neither does it deal with the handling of specific hazardous materials. This standard does not specify the requirements for delivering persons and materials to fixed landing levels. Such equipment is referred to as lifts or hoists and are dealt with by other standards. This standard does not include Mobile Elevating Work Platforms (MEWPs) according to EN 280, Suspended access equipment according to EN 1808 or Lifting tables according to EN 1570.

Lifting platforms - Mast climbing work platforms (Incorporates Amendment A2: 2009)

ASME PALD INTERPRETATIONS-1997 PALD-1997的说明.便携式自动提升装置安全标准

PALD aplies to the design, testing, operation, maintenance, and inspection of portable automotive lifting devices including: hydraulic hand jacks, transmission jacks, engine stands, vehicle support stands, emergency tire changing jacks, upright-type mobile lifts, service jacks, wheel dollies, shop cranes, swing-type mobile lifts, scissors-type mobile lifts, auxiliary stands, automotive ramps, high reach supplementary stands, fork lift jacks, high reach fixed stands, vehicle transport lifts, and attachments, adapters, and accessories.

Interpretations to PALD-1997 Safety Standard for Portable Automotive Lifting Devices

ASME B30.20 INTERPRETATIONS-1997 B30.20-1993说明.下吊钩提升装置

Interpretations to B30.20-1993 Below-The-Hook Lifting Devices

Interpretations to B30.20-1993 Below-The-Hook Lifting Devices

DLA MS87006 NOTICE 1-1997 链型吊钩

MS87006 is inactive for new design and is no longer used except for replacement purposes.

HOOK, CHAIN'S

ASME B30.7c Addenda-1997 基座固定卷筒提升机.修改件

Base mounted drum hoists; Addenda

ASME PALD-1997 便携式自动提升装置

Portable automotive lifting devices

JIS B 8819:1996 手动链式杠杆起重机

この規格は，手動でレバーを操作することによって荷を巻上げ，巻下げ，けん引などができるリンクチェーンを用いたチェーンレバーホイスト(以下，レバーホイストという。)について規定する。

Manually operated chain lever hoists

ARMY MIL-PRF-52342 D-1996 吊索:起重机械剥落箱

This specification covers a four-leg lifting sling equipped with a spreader bar.

SLING ASSEMBLY: FLAKING BOX, LIFTING

ARMY A-A-52555-1996 伯顿风格吊笼钩

This CID covers a forged-steel, burton-style, hoist hook.

HOOK, HOIST, BURTON-STYLE

ARMY MIL-C-62135 A NOTICE 1-1996 物料搬运(基本和重建)起重机

This notice should be fled in fiont of MIL-C-621 3 5A(AT), dated 2 1 May 1976.

CRANE: MATERIAL HANDLING (BASIC AND REBUILD)

ASME B30.20b Addenda-1996 低吊钩提升装置.补充件

Below-the-hook lifting devices; Addenda

JIS C 9620:1995 电动金属丝绳提升机

Electric wire rope hoists

ARMY A-A-52509-1995 公制7.26至13.62公吨车辆的轻负荷拖钩

This CID covers the requirements for a light towing hook for use when towing vehicles weighing fìrom 7.26 to 13.62 metric tonnes. The towing hook, herein referred to as "hook", interfaces with a towing lug which is attached to the vehicle to be towed.

HOOK, TOWING: LIGHT (FOR VEHICLES 7.26 TO 13.62 METRIC TONNES) (METRIC)

ARMY A-A-52538-1995 127/203MM抓钩

This CID covers one type of 127 x 203 millimeters(mm)(5 by 8 inches(in)) steel log-grab hook, which is intended tofacilitate towing and skidding logs.

HOOK, LOG-GRAB (127 BY 203 MILLIMETERS)

ARMY A-A-52539-1995 定期视力启闭机钩

This CID covers a forged-steel, regular eye, hoist hook with safety latch. The hoist hook is intended for use in cargo handling, including the hoisting of conex metal shipping boxes.

HOOKS, HOIST (REGULAR EYE)

SANS 1638:1995 空气动力链式提升机

This standard specifies the characteristics of pneumatically operated chain hoists for vertical lifting service involving freely suspended (unguided) loads.

Pneumatically operated chain hoists

ASME B30.7a Addenda-1995 基座固定卷筒提升机.附录

Base mounted drum hoists; Addenda

JIS D 8107:1994 汽车用起重机

この規格は，自動車の昇降に用いる空気油圧式オートリフト(以下，オートリフトという。)について規定する。

Lifts for automobiles

ARMY A-A-52497-1994 公制(13至36公吨)重型车辆的拖车钩

This CID covers the requirements for a heavy towing hook which is used for towing vehicles weighing 36 metric tonnes and over.

HOOK, TOWING: HEAVY (FOR VEHICLES 36 METRIC TONNES AND OVER) (METRIC)

ARMY A-A-52496-1994 公制(13至36公吨)中号车辆的拖车钩

This CID covers the requirements for a medium towing hook which is used for towing vehicles weighing 13 to 36 metric tonnes.

HOOK, TOWING: MEDIUM (FOR VEHICLES 13 TO 36 METRIC TONNES) (METRIC)