53.120 手工搬运工具 标准查询与下载

SANS 341:2007 捣击镐和丁字镐

Covers requirements for the materials, dimensions, construction and finish of 2 types of picks, 1 type of beater pick and 6 types of mattocks.

Picks, beater picks and mattocks

BS 3388:2004 叉子、铁锹和铲.要求和试验方法

This British Standard specifies the dimensions, materials, construction, finish and testing for a range of garden, agricultural and contractors' tools. NOTE Guidance on the safe use of tools is also given in Annex B.

Forks, shovels and spades - Requirements and test methods

SANS 284:2004 锹和铲

Specifies the requirements for dimensions, materials, construction and strength of four types of spades and ten types of shovels.

Spades and shovels

KS B 6605-2001 杆

이 규격은 일반적으로 사용하는 지렛대에 대하여 규정한다.

Bar

KS B 6605-2001(2016) 酒吧

Bar

KS B 6605-2001(2021) 酒吧

Bar

DS/EN 12527:1999 脚轮和轮子 试验方法和装置

This European Standard specifies the test methods and apparaturs to be used to check the performance of the castors and wheels. The test to be used and the acceptance criteria, values and applicability relevant to each type of castor and wheel are covered by the specific standards.

Castors and wheels - Test methods and apparatus

DS/EN 12532:1999 脚轮和轮子 适用于高达 1.1 m/s（4 km/h）应用的脚轮和轮子

This European standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European Standard applies to castors and wheels (which may include accessories) for manually propelled or power towed industrial applications up to 1,1 m/s (4 km/h). This European Standard does not apply to castors and wheels for furniture, swivel chairs, institutional, hospital beds and driven applications.

Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h)

DS/EN 12533:1999 脚轮和轮子 适用于速度超过 1.1 m/s（4 km/h）和高达 4.4 m/s（16 km/h）的应用的脚轮和轮子

This European Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European Standard applies to castors and wheels (which may include accessories) specifically for manually propelled or power towed industrial applications at speeds over 1,1 m/s /4 km/h) and up to 4,4 m/s (16 km/h). Pneumatic wheels and drive wheels are excluded from this standard.

Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)

CNS 541-1997 尖铲

本标准适用于尖铲。

Shovels with Point End

CNS 540-1997 方铲

本标准适用于方铲。

Square Shovels

BS 1421:1995 镐、捣击镐与鹤嘴锄规范

This British Standard specifies the quality, dimensions and mass, together with the dimensions of shafts where appropriate, for the following types of picks: a) navvy pick; b) beater pick; c) mattock; d) miner's pick; e) ACME pick.

Specification for picks, beater picks and mattocks

JIS A 8652:1995 混凝土模板用金属板

この規格は，鋼製又はアルミニウム合金製の面板及びさん材からなるコンクリート型わく用パネル(以下,パネルという。)について規定する。備考 この規格の中で{｝を付けて示してある単位及び数値は，従来単位によるもので参考値である。

Metal panels for concrete form

JIS A 8905:1993 施工机械.维修刀具.维护和调节用手工工具

この規格は，建設機械の運転員が日常整備と調整作業に使用するため，建設機械に搭載する工具(以下工具という。)の種類及び主要寸法について指針として規定する。備考1.建設機械の製造業者は，原則として，建設機械の種類に応じて適切な種類及び主要寸法の工具を，この規格から選択するものとする。

Construction machinery -- Service tools -- Hand tools for maintenance and adjustment works

MT/T 215-1990 电动翻车机

Electric dumper

DIN 1197-1:1990 椭圆形手锄眼.尺寸、要求、检验

The standard applies to eyes for picks, scrapers, and hatchets for fixation to handles as per DIN 6437 part 1.

Eyes for picks, oval; dimensions, requirements, testing

DIN 6437-2:1990 手镐柄.量规

Pickaxe handles; gauges

DIN 6437-1:1990 手镐柄.尺寸、要求、检验

The standard applies to pickaxe handles fitted to picks, acrapers and hatchets in underground use.#,,#

Pickaxe handles; dimensions, requirements, testing

DIN 1197-2:1990 椭圆形手锄眼.塞规

Pick eyes, oval; plug gauges

GOST 25782-1990 刮平尺、抹灰刀和粗抹灰刀技术条件

Настоящий стандарт распространяется на правила, терки и полутерки, применяемые при производстве штукатурных работ

Darbies, floats, semifloats. Specifications