55.100 瓶、小罐、瓮 标准查询与下载

DIN EN ISO 9100-2 Berichtigung 1:2010 玻璃容器.真空凸缘瓶口.第2部分:中型33.技术勘误DIN EN ISO 9100-2-2006

Glass containers - Vacuum lug finishes - Part 2:33 medium (ISO 9100-2:2005); German version EN ISO 9100-2:2005, Corrigendum to DIN EN ISO 9100-2:2006-02, German version EN ISO 9100-2:2005/AC:2009

BB/T 0055-2010 包装容器 铝质饮水瓶

本标准规定了铝质饮水瓶(以下简称饮水瓶)的产品分类、材料、要求、试验方法、检验规则和标志、包装、运输、储存。 本标准适用于容量不大于2L的用于盛装饮用水、饮料、酒类的各种规格的饮水瓶。

Packing containers-Aluminum water bottle

EN 16067:2010 包装.硬质材料容器.宠物完成26,7(铅 9,00)

Packaging - Rigid plastic containers - PET finish 26@7 (lead 9@00)

DIN EN ISO 9100-4:2010 玻璃容器.真空凸缘瓶口.第4部分:中型38(ISO 9100-4-2005+Cor.1-2009).德文版本 EN ISO 9100-4-2005+AC-2009

This part of ISO 9100 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005 + Cor. 1:2009); German version EN ISO 9100-4:2005 + AC:2009

DIN EN ISO 9100-3:2010 玻璃容器.真空凸缘瓶口.第3部分:普通规格38(ISO 9100-3-2005 +勘误表1-2009).德文版本EN ISO 9100-3-2005 + AC-2009

This part of ISO 9100 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005 + Cor. 1:2009); German version EN ISO 9100-3:2005 + AC:2009

LST EN ISO 9100-2:2005/AC:2010 玻璃容器 真空凸耳饰面 第2部分：33 介质 技术勘误 1（ISO 9100-2:2005/Cor 1:2009）

Glass containers - Vacuum lug finishes - Part 2: 33 medium - Technical Corrigendum 1 (ISO 9100-2:2005/Cor 1:2009)

GOST R ISO 8106-2010 玻璃容器.通过重量分析对容量进行测定

Glass containers. Determination of capacity by gravimetric method

ASTM D2911-10 塑料瓶的尺寸和公差的标准规范

1.1 This specification covers the thread configuration and dimensions for finishes for plastic bottles with screw-type closures, having a maximum capacity of 18.9 L (5 gal) and a maximum bottle dimension of 305 mm (12 in.). Included are tolerances for bottle capacity and body dimensions. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 8 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;There is no known ISO equivalent to this standard.

Standard Specification for Dimensions and Tolerances for Plastic Bottles

ASTM F2013-10(2016) 采用自动静态顶空取样装置和毛细管气相色谱火焰离子化检测器测定聚对苯二甲酸乙二醇酯瓶聚合物中残留乙醛的标准试验方法

5.1 This test method is of particular use as a quality control tool for a molding or synthesis operation. Acetaldehyde is a volatile degradation product generated during melt processing of PET. Thus, it becomes trapped in the sidewalls of a molded article and desorbs slowly into the contents packaged therein. In some foods and beverages AA can impart an off-taste that is undesirable, thus, it is important to know its concentration in PET articles that are to be used in food contact applications. 5.2 The desorption conditions of 150 C for 60 min are such that no measurable AA is generated by the sample during the desorption process. 1.1 This test method covers a gas chromatographic procedure for the determination of the ppm residual acetaldehyde (AA) present in poly(ethylene terephthalate) (PET) homo-polymers and co-polymers which are used in the manufacture of beverage bottles. This includes sample types of both amorphous and solid-stated pellet and preform samples, as opposed to the bottle test, Test Method D4509, an acetaldehyde test requiring 24 h of desorption time at 23°C into the bottle headspace and then the concentration of the headspace quantified by a similar GC method. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector

GOST R ISO 9058-2010 玻璃容器.瓶子.公称尺寸的标准公差

Glass containers. Bottles. Standard tolerances of nominal dimensions

EN 15904:2010 玻璃封装.flaconnage公差标准

This European Standard specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. The following tolerances are concerned: brimful capacity; height; diameter and width; verticality. The following types of bottles are excluded fromThis standard: "miniatures"; small bottles for extracts, essences, etc.; small jars (e. g. individual portions of jam).

Glass packaging - Standard tolerances for flaconnage

GOST R 53921-2010 酒精与非酒精食品用玻璃容器.通用规范

Glass containers for alcohol and non - alcohol food products. General specifications

GOST R 53846.1-2010 玻璃瓶.瓶颈饰面层.类型和尺寸规格.第1部分:装饰胶带KPM-30

Class bottles. Neck finishes. Types and dimensions. Part 1. Finish tape KPM-30

DS/EN ISO 9100-2/AC:2009 玻璃容器 真空凸耳饰面 第2部分：33 介质

This European standard specifies the dimensions of a vacuum lug finish with a nominal size of 33 mm medium for glass containers.

Glass containers - Vacuum lug finishes - Part 2: 33 medium

DS/EN ISO 9100-3/AC:2009 玻璃容器 真空凸缘饰面 第3部分：38 常规

This European standard specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 3: 38 regular

DS/EN ISO 9100-4/AC:2009 玻璃容器 真空凸耳饰面 第4部分：38 介质

This European standard specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 4: 38 medium

LST EN ISO 9100-3:2005/AC:2009 玻璃容器 真空凸耳饰面 第3部分：38 条常规 技术勘误 1（ISO 9100-3:2005/Cor 1:2009）

Glass containers - Vacuum lug finishes - Part 3: 38 regular - Technical Corrigendum 1 (ISO 9100-3:2005/Cor 1:2009)

LST EN ISO 9100-4:2005/AC:2009 玻璃容器 真空凸耳饰面 第4部分：38 介质 技术勘误 1（ISO 9100-4:2005/Cor 1:2009）

Glass containers - Vacuum lug finishes - Part 4: 38 medium - Technical Corrigendum 1 (ISO 9100-4:2005/Cor 1:2009)

EN ISO 9100-2:2005/AC:2009 玻璃容器.真空凸缘瓶口.第2部分:中型33 包含修改件AC,2009

Glass containers - Vacuum lug finishes - Part 2: 33 medium - Technical Corrigendum 1 (ISO 9100-2:2005/Cor 1:2009)

ISO 9100-2:2005/Cor 1:2009 玻璃容器.真空凸缘瓶口.第2部分:中型33 技术勘误表1

Glass containers — Vacuum lug finishes — Part 2: 33 medium — Technical Corrigendum 1