55.120 罐、听、管 标准查询与下载

DIN EN 14401:2004 硬质塑料容器.闭塞物有效性的试验方法

This European standard specifies a method for testing the effectiveness of the seals of closures on plastic bottles and jars up to 5.0 l, of plastics canisters/jerricans with a nominal volume up to 20 l and of plastic pails with a nominal volume up to 60 l.#,,#

Rigid plastics containers - Methods to test the effectiveness of closures; German version EN 14401:2004

AS 2854:2004 普通马口铁罐

Specifies structural and performance requirements for two- and three-piece tinplate cans for general use. Nominal dimensions and capacities are given for a range of stock size cans up to a maximum nominal diameter or cross-section of 230 mm.

Tinplate cans for general use

EN 14401:2004 硬塑料容器.闭塞物有效性的试验方法

This European Standard specifies a method for testing the effectiveness of the seals of closures on plastic bottles and jars up to 5,0 l, of plastics canisters/jerricans with a nominal volume up to 20 l and of plastic pails with a nominal volume up to 60 l.NOTE Plastics bottles, jars, canisters and jerricans are referred to as “containers” in this standard.

Rigid plastics containers - Methods to test the effectiveness of closures

AS 2730:2004 钢基食品罐的两重卷封

Specifies requirements for double seams for steel-based three piece and drawn cans for foods and also for steel food cans with aluminium foil ends attached to a steel ring. Criteria for double seams of acceptable quality are set out, and methods for the

Double seams for steel-based cans for foods

DS/ISO 1361:2004 轻型金属容器 圆形敞口罐 内径

This standard establishes a list of recommended diameters for round two-piece and three-piece cans in tinplate or aluminium seamed after filling and defined by their nominal gross lidded capacity.

Light-gauge metal containers - Round open-top cans - Internal diameters

BB 0006-2004 包装容器.20mm口径铝气雾罐

本标准规定了20mm口径铝喷雾罐的技术要求，试验方法，检验规则及其标志、包装、运输、贮存。 　　本标准适用于20mm口径、容量为不大于120mL的铝喷雾罐的制造、使用、流通和监督检验。

Packing containers-20 mm aperture aluminum aerosol can

LST EN 13027-2002 包装 轻型金属包装 由标称总盖容量定义的开顶圆罐

Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity

BS 1262:2002 金属包装.有表面涂料用带圆拉环的金属容器.规格

This British Standard specifies requirements for round metal containers with lever lids. It applies to containers with nominal volumes of between 125 ml and 10 l, and which are intended primarily for paints and other surface coatings. Performance requirements and related methods of test are included. These cover freedom from leaks, stacking strength, handle strength, lid security, print adhesion and resistance to corrosion. The drop and topple tests for lid security apply only to containers of nominal volume not exceeding 5 l (see 7.3). This standard does not cover the suitability of containers for use with any particular product. Various methods of test for filled packages are given in the Bibliography.

Metal packaging. Round lever-lid metal containers for surface coatings. Specification

LST EN 13046-2002 包装 柔性圆柱形金属管 尺寸和公差

Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances

LST EN 13047-2002 包装 柔性锥形金属管 尺寸和公差

Packaging - Flexible conical metallic tubes - Dimensions and tolerances

LST EN 13028+AC-2002 包装 轻型金属包装 用于添加气体的饮料产品的圆形开顶罐，由其标称灌装量定义

Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes

LST EN 13026-2002 包装 轻型金属包装 非圆形、圆柱形和锥形通用金属容器的标称灌装容量，最高 30 000 毫升

Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml

DIN 6103:2002 包装材料.圆柱形塑料软管.同轴多层管.尺寸、材料

This standard specifies the dimensions, geometric characteristics, performance and designation of flexible cylindrical plastic tubes, coex multilayer tube. It is applicable to tubes used mainly for packing pharmaceutical, cosmetic, hygiene.#,,#

Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials

DIN 6112:2002 包装.轻型金属测量容器.插入式REL塑封闭装置的孔径

The document specifies aperatures for REL-closures.

Packaging - Light gauge metal containers - Aperture for plug-in REL plastic closures

LST EN ISO 90-1:2001 轻型金属容器 尺寸和容量的定义和测定 第1部分：敞口罐（ISO 90-1:1997）

Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997)

LST EN ISO 90-2:2001 轻型金属容器 尺寸和容量的定义和确定 第2部分：通用容器（ISO 90-2:1997）

Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997)

LST EN 12377-2001 包装 软管 密封件气密性的试验方法

Packaging - Flexible tubes - Test method for the air tightness of closures

DS/EN 13027:2001 包装 轻型金属包装 由标称总盖容量定义的敞口罐

This European Standard specifies the range of the capacities of the cans defined by their nominal gross-lidded capacities, their metal thickness not exceeding 0,49 mm.

Packaging - Light gauge metal packaging - Open-top cans defined by their nominal gross-lidded capacity

DS/EN 13026:2001 包装 轻型金属包装 非圆形、圆柱形和锥形通用金属容器的标称灌装容量，最高 30 000 毫升

This standard specifies the range of nominal filling volumes in common use for rectangular, cylindrical and tapered general use containers of up to 30 000 ml nominal volume, metal thickness not exceeding 0,49 mm nominal. Specifically, this standard relates to flat top rectangular containers for liquid products i.e. those containers fitted with an aperture suitable for pouring.

Packaging - Light gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml

DS/EN 13028:2001 包装 轻型金属包装 用于饮料产品的圆形开顶罐，可添加或不添加气体，由标称灌装量定义

This standard specifies the nominal filling volumes and the nominal diameters of round open-top cans for liquid products with added gas, metal thickness not exceeding 0,49 mm nominal.

Packaging - Light gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes.