共找到 375 条与 罐、听、管 相关的标准,共 25 页
This part of EN ISO 90 defines general use containers, types of container, cross-sections, constructions, shapes, special features and capacities. It specifies methods for determining cross-sections, and gross-lidded and brimful capacities. It also recommends an international designation.
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers
This standard specifies a test method for air tightness of the closures for flexible tubes. It is applicable to flexible single-layer metal or plastics tubes and multilayer or laminated tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.
Packaging - Flexible tubes - Test method for the airtightness of closures
MIL-C-l0464F, dated 14 February 1990, is hereby reinstated and may be used for acquisition.
CANS, HERMETIC SEALING, METAL, LIGHT GAGE, TEAR-STRIP TYPE
Hermetically sealed metal cans for food and drink
This standard specifies a test method for airtightness of the closures for flexible tubes. It is applicable to flexible single-layer metal or plastics tubes, and multilayer or laminated tubes, used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.
Packaging. Flexible tubes. Test method for the airtightness of closures
Packaging. Flexible tubes. Test method for the airtightness of closures.
Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998
Packaging. Flexible aluminium tubes. Wall thickness determination method.
This standarcl specifies a test method for airtightness of the closures for flexible tubes. It is applicable to flexible single-layer metal or pastics tubes and multilayer or laminated tubes used for packing pharmaceutical, cosmetic, hygiene, food and offer domestic and industrial products
Packaging - Flexible Tubes - Test Method for the Airtightness of Closures Ratified European Text
The document specifies seaming chucks as a tool for the reception of ends for double seaming in accordance with DIN 2023-1 in the double seamer for the production of double seam.
Metal packages - Ends for double seaming, round - Part 3: Seaming chucks
The document specifies go chuckfit gauges and spoilage chuckfit gauges to test the chuck dimensions of ends for double seaming in accordance with DIN 2023-1.
Metal packages - Ends for double seaming, round - Part 2: Chuckfit gauges
Metal packages - Ends for double seaming, round - Part 1: Dimensions, material, marking
This British Standard specifies requirements, including screw thread dimensions, for a range of metal screw necks for metal containers, and for the metal screw caps and inner seals intended for use as closures and tamper evident devices respectively.
Metal screw necks, screw caps and inner seals for metal containers - Specification
This British Standard specifies capacities, dimensions and constructional requirements for a range of round cone top cans with integral screw necks, manufactured from tinplate and having nominal filling volumes between 125 ml and 1 litre, intended to contain liquid products. NOTE Informative annex A gives recommendations on details to be agreed between interested parties, e.g. purchaser and supplier.
Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products - Specification
Light-gauge metal containers. Round open-top cans. Internal diameters
This International Standard establishes a list of recommended diameters for round two-piece and three-piece cans in tinplate or aluminium seamed after filling and defined by their nominal gross lidded capacity.
Light-gauge metal containers - Round open-top cans - Internal diameters
This International Standard establishes a list of recommended diameters for round two-piece and three-piece cans in tinplate or aluminium seamed after filling and defined by their nominal gross lidded capacity.
Light-gauge metal containers - Round open-top cans - Internal diameters
This British Standard specifies requirements, applicable at the time of supply, for a range of plastics containers, with nominal volumes between 125 ml (millilitres) and 101 (litres), intended primarily for paints and other products of the surface coatings industry. Performance requirements and related methods of test are described covering freedom from leaks, stacking strength, anti-static properties, handle strength and lid security. NOTE 1. Compliance with this standard does not in itself imply suitability for the purpose for which the container is used. NOTE 2. Where paints or other products are classed as hazardous, the package will be required to conform to the appropriate supply or carriage regulations. This may require performance testing and certification of packages.
Specification for plastics containers for surface coatings
Prezenta parte a ISO 90 define?te recipientele de uz general, tipuriie, sec?iunile transversale, construc?ia, formele, caracteristicile specifice ?i capacit??ile acestor cutii. Aceast? parte stabile?te metodele de determinare a diferitelor sec?iuni transv
Light gauge metal containere - Definitions and determination methods for dimensions and capacities - Part 2: General use containere
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号