55.120 罐、听、管 标准查询与下载

BS ISO 11944:1995 通用圆形小量规金属容器.最大容量为10 000 ml 的圆柱形罐和圆锥形罐的标称直径

Lists the nominal diameters this list being reduced in relation to that given in ISO/TR 10193:1989. Designations and special features of the containers dealt with are given in ISO 90-2.

Round general use light gauge metal containers - Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity

JIS Z 1706:1995 吹塑聚乙烯容器

この規格は，工業薬品，試薬，農業薬品，医薬品，蒸留水及び食料品などを入れる容器として使用されるポリエチレンかん(以下，かんという。)及びそれに附属するせんにフいて規定する。

Containers blow-molded from polyethylene

JIS Z 1710:1995 装煤油用的吹塑聚乙烯容器

この規格は，燈油()の運搬及び貯蔵に用いる燈油用ポリエチレンかん(以下，かんという。)について規定する。

Blow moulded polyethylene containers for kerosine

JIS Z 1620:1995 钢桶

この規格は，液体危険物及び固体危険物並びに非危険物の輸送及び貯蔵容器として用いる呼び容量18Lガら20Lまでの鋼製ペール(以下，ペールという。)について規定する。

Steel pails

ASTM D5833-95e1 钢罐的再利用,再循环和再处理的标准指南

1.1 This guide provides general information to public officials and business and industry managers regarding the source reduction, reuse, recycling, or disposal of steel cans under 5-gal (wet) or 40-lb (dry) capacity. It presents a comprehensive overview of the steel can life cycle. Five- gallon pails and larger containers, up to 55-gal drums, will be in a separate guide due to their inherently different use and management when empty. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans

CSN ISO 10154:1994 轻型量表的金属容器．三件向内卷曲颈马口铁气溶剂罐．顶端尺寸

Zpracovatel: MSB LOGISTIK, s. r. o., Praha, ICO 416 958 44, Ing. Jind?ich Jandourek Pracovník ?eského normaliza?ního institutu: Ing. Zdeněk Ku?era

Light gauge metal containers - Three-piece necked-in tinplate aerosol cans - Dimensions of the top end

CSN ISO 10653:1994 轻型量表的金属容器．圆形开顶罐．根据公称总装盖容量定义的食品罐

Light gauge metal containers - Round open-top cans - Cans defined by their nominal gross lidded capacities

CSN ISO 10654:1994 轻量规金属容器．圆形开顶罐．由标称灌装容量定义的加气液体产品用罐

Zpracovatel: MSB LOGISTIK, spol. s r. o., Praha, I?O 41695844 - Ing. Jind?ich Jandourek Pracovník ?eského normaliza?ního institutu: Ing. Zdeněk Ku?era

Light-gauge metal containers - Round open-top cans - Cans for liquid products with added of gas, defined by their nominal filling volumes

CNS 13263-1993 金属板制口盖及口盖座

本标准适用于石油类、涂料、化学药品、油脂、食品等一般桶类容器，所用之金属板制口盖及口盖座。备考：本标准中｛ ｝内所示之单位及数值系公制。

Metal Caps and Nozzles

ISO 10654:1993 薄壁金属容器 顶开圆罐 按公称灌装容量定义的用于充气液体产品的罐

Specifies the nominal filling volumes and related nominal diameters of the cans. Diameters shall be determined in accordance with ISO 90-1.

Light-gauge metal containers; round open-top cans; cans for liquid products with added gas, defined by their nominal filling volumes

ISO 10653:1993 薄壁金属容器 顶开圆罐 按装盖后的公称总容量定义的罐

Specifies the nominal gross lidded capacities and related nominal diameters of the cans. Gross lidded capacities and tolerances shall be determined in accordance with ISO 90-1.

Light-gauge metal containers; round open-top cans; cans defined by their nominal gross lidded capacities

DIN 55436-3:1992 包装试验.铝管.内面保护漆层的孔隙率处理.电解方法

This document specifies cylindrical and conical tubes made of aluminium. The test serves for determinating the porosity of the inside protective lacquer.

Packaging test; tubes made of aluminium; disposition of porosity of the inside protective lacquer; electrolytical test

DIN 5059-1:1992 包装.金属和塑料管.金属管.管嘴、管肩

Packaging; metal and plastic tubes; metal tubes; tube nozzles, tube shoulders

ISO/TR 11776:1992 薄壁金属容器 非圆形顶开罐 按公称容量定义的罐

Gives a list of nominal capacities up to 2000 ml. Applies to the following shapes: rectangular, oval, obround, trapezoidal. Annex A gives a classification of can sizes by shapes with related nominal sections. Annex B lists can sizes previously standardized in ISO 3004-2, 3004-4 and 3004-5 and now excluded as they do not meet the required criterion of this report.

Light gauge metal containers; non-round open-top cans; cans defined by their nominal capacities

ISO/TR 11762:1992 薄壁金属容器 用于充气液体产品的顶开圆罐 按结构类型对罐尺寸的分类

Gives a list of nominal filling volumes for the following containers: straight-sided cans, single necked-in cans, multiple necked-in cans. Annex A gives a reference list to can sizes formerly standardized in ISO 3004-3, but now these cans do not meet the required criteria to be standardized and incorporated in ISO 10654.

Light-gauge metal containers; round open-top cans for liquid products with added gas; classification of can sizes by construction type

ISO/TR 11761:1992 薄壁金属容器 顶开圆罐 按结构类型对罐尺寸的分类

Gives a list of nominal gross lidded capacities and nominal diameters for round open top cans. Annex A gives a reference list to can sizes formerly standardized in ISO 3004, but now these cans do not meet the required criteria to be standardized and incorporated in ISO 10653.

Light-gauge metal containers; round open-top cans; classification of can sizes by construction type

BS 7379:1991 塑料/金属叠层可涨缩软管规范

Specifies the material to be used in the manufacture of tubes together with diameters, lengths, wall thickness and thread details. Also specifies requirements for seal integrity, side-seam and shoulder welding, fill volumes, surface print restrictions and packaging.

Specification for plastics/metal laminate collapsible tubes

BS 1133-10.1:1990 包装规程.第10节:金属容器.第1小节:马口铁制听桶和罐

Guidance on the various types of tins and cans including information on manufacture.

Packaging code. Metal containers. Tins and cans

NF H33-001:1990 密封的金属食品容器.罐头盒.几何特性

Hermetically seamed metal food containers. Food cans. Geometrical characteristics.

CNS 2444-1990 聚乙烯塑料瓶

本标准适用于盛装工业药品、化学试药、农业药品、医药品、饮料等用之聚乙烯塑料瓶（以下简称塑料瓶）。

Polyethylene Bottle