55.140 粗腰桶、桶、筒等 标准查询与下载

ANSI/UL 1314(R200x)-2005 专用金属容器的安全性标准(ANSI/UL1314-2005标准的再确认)

Standard for Safety for Special-Purpose Metal Containers (reaffirmation of ANSI/UL 1314-2005)

EN 13025-2:2005 包装.轻型金属容器.20000 ml,25000 ml和30000 ml标称容量不可移动盖(活盖)圆钢和马口铁容器

Part 2 of EN 13025 specifies 20 l, 25 l and 30 l nominal capacity round cylindrical and tapered non-removable head containers with steel and tinplate thickness not exceeding 0,49 mm. Recommended dimensions related to this range of nominal filling volumes are shown in Table 1 of this European Standard.

Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml

KS A 1605-2004 手持式燃油罐

FUEL CANS FOR HANDY TYPE

ANSI MH2-2004 物料装卸(容器).钢筒和提筒

A dimensional standard for the manufacture of free-standing steel drums and pails having capacities from 5 to 58 gallons. The dimensions for sizes and types most commonly used in domestic and export shipments are included in this standard as well as key construction elements.

Materials Handling (Containers) - Steel Drums and Pails

DIN 6647-4:2004 包装手段 圆柱形饮料包装盒 第4部分:允许工作压力3巴及以下、标称容量60升及以下的不回收包装

This standard applies to containers for beverages and syrup ("filling substances", hereafter called "contents") consisting of several parts (e.g. top end, cylindrical shell, bottom end), which are joined by a suitable method. It applies to a maximum allowable operating pressure up to 3 bar and a nominal volume up to 60 litres. The containers are used as non-returnable packaging.

Means of packaging - Cylindrical beverage containers - Part 4: Non-returnable packaging withallowable operating pressure up to 3 bar, nominal volume up to 60 litres

UL 30 BULLETINS-2004

The following items are subject to comment: 1.) Deletion of the Scope paragraph 1.3. 2.) The updating of the Units of Measurement text entity in Section 2.1. 3.) Updating the references to ASTM Standards. 4.) The 9th Edition of the Standard for Safety for Metal Safety Cans, UL 30. These requirements cover metal safety cans that have nominal capacities of five gallons (18.9 L) or less and that are primarily intended to store and handle flammable and combustible liquids, such as gasoline, naphtha, kerosene, acetone, MEK, and similar liquids in accordance with the Flammable and Combustible Liquids Code, NFPA 30

3/31/2004 (14p)

GOST R 52267-2004 液体食物用金属桶.规范

Metal barrels for food liquids. Specifications

ANSI/UL 30-2004 金属安全罐的安全性标准

The following items are subject to comment: 1.) Deletion of the Scope paragraph 1.3. 2.) The updating of the Units of Measurement text entity in Section 2.1. 3.) Updating the references to ASTM Standards. 4.) The 9th Edition of the Standard for Safety for Metal Safety Cans, UL 30. These requirements cover metal safety cans that have nominal capacities of five gallons (18.9 L) or less and that are primarily intended to store and handle flammable and combustible liquids, such as gasoline, naphtha, kerosene, acetone, MEK, and similar liquids in accordance with the Flammable and Combustible Liquids Code, NFPA 30.

Standard for Safety for Metal Safety Cans

DIN 6647-3:2003 包装材料 圆柱形饮料桶 第3部分:允许工作压力不超过3巴、标称容量大于100升

This standard applies to beverage containers rated for an allowable operating pressure of up to 3 bar and with a nominal volume greater than 100 litres (hereinafter termed "containers"). This standard specifies technical and hygiene requirements and the relevant test methods. The stipulations of the Gefahrgutverordnung Straβe (German Regulation on the transportation of hazardous freight by road) and the 14. Verordnung zum Geratesicherheitsgesetz (14th Regulation relating to the German Equipment Safety Act) continue to apply.

Means of package - Cylindrical beverage containers - Part 3: Allowable operating pressure up to 3 bar, nominal volume greater 100 litres

GSO 1607:2002 用于废物的移动聚乙烯容器

The standard is concerned with mobile garbage bins made from high density polyethylene materials with a capacity of 120 and 240 litres

Polyethylene mobile garbage bins .

GSO 1608:2002 移动聚乙烯容器废物测试方法

The standard is concerned with the methods of testing mobile garbage bins made from high density polyethylene with a capacity of 120 and 240 litres.

Mehtods of testing polyethylrne mobile garbage bins .

LST EN 12713-2002 用于标称容量为 20 l 至 60 l 的塑料容器的螺旋盖封闭系统

Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l

KS T 1089-2002(2012) 木桶

BARRELS (FOREIGN TYPE)

LST EN 12709-2002 塑料桶 标称容量为20升至120升的不可拆封头（紧封头）圆形截面圆桶

Plastics drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l

LST EN 13008-2002 钢桶 标称容量为 15 升至 62 升的可拆卸封盖（开口封盖）圆桶

Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l

LST EN 12712-2002 塑料罐 标称容量为 20 升至 60 升的罐，用于最佳利用托盘尺寸 800 毫米 x 1200 毫米、1000 毫米 x 1200 毫米和 1140 毫米 x 1140 毫米

Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm

LST EN 13007-2002 钢桶 标称容量为 20 升至 60 升的不可拆卸封头（密封封头）圆桶

Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l

BS EN ISO 15750-2:2002 包装 钢制鼓形桶 最小总容量为121L、216.5L和230L的不可拆盖式（密封盖）鼓形桶

Packaging. Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l

BS EN ISO 15750-1:2008 包装.钢制鼓形桶.最小总容量为208L、210L和216.5L的可拆盖式(密封盖)鼓形桶

This part of ISO 15750 specifies the characteristics and dimensions of removable head (open head) drums, manufactured from steel sheet, having a total capacity of 208 l, 210 l and 216,5 l. It also specifies a method for measuring the total and brimful capacity.

Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l

BS EN ISO 15750-3:2002 包装 钢桶 插入法兰式封口系统

Packaging. Steel drums. Inserted flange-type closure systems