55.140 粗腰桶、桶、筒等 标准查询与下载

BS EN ISO 15750-2:2008 包装.钢制鼓形桶.最小总容量为121L、216.5L和230L的不可拆盖式(密封盖)鼓形桶

This part of ISO 15750 specifies the characteristics and dimensions of non-removable head (tight head) drums, manufactured from steel sheet, having a total capacity of 212 l, 216,5 l and 230 l. It also specifies a method for measuring the total capacity and brimful capacity, and a draining test method.

Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l

BS EN ISO 15750-3:2008 包装.钢桶.插入法兰式封口系统

Packaging - Steel drums - Inserted flange-type closure systems

BS EN ISO 15750-1:2002 包装 钢制鼓形桶 最小总容量为208L、210L和216.5L的可拆盖式（密封盖）鼓形桶

Packaging. Steel drums. Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l

ASTM F976-99 消费者用便携式煤油容器的标准规范

1.1 This specification establishes nationally recognized performance requirements common to both kerosine and diesel portable containers for reuse by the consumer. Only color and marking are differentiated. The test medium specified for chemical resistance is kerosine due to the more aggressive nature of kerosine on elastomers and other materials of construction.1.2 This specification does not include single-trip pre-packaged containers.1.3 This standard is not a fire risk assessment standard, or a fire test standard, but a specification for portable kerosine containers for consumer use. 1.4 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Additional precautionary information is given in Section 6.

Standard Specification for Portable Kerosine Containers for Consumer Use

ISO 15750-3:2002 包装.钢筒.第3部分:钢桶用插入法兰型密封系统

This part of ISO 15750 specifies the characteristics, dimensions and finish of the inserted flange-type closure systems used for steel drums.

Packaging - Steel drums - Part 3: Inserted flange-type closure systems

ISO 15750-2:2002 包装.钢筒.第2部分:最小总容量为 212 l, 216,5 l 和 230 l的密封盖圆筒

This part of ISO 15750 specifies the characteristics and dimensions of non-removable head (tight head) drums, manufactured from steel sheet, having a total capacity of 212 l, 216,5 l and 230 l. It also specifies a method for measuring the total capacity and brimful capacity, and a draining test method.

Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l

ISO 15750-1:2002 包装.钢筒.第1部分:最小总容量为 208 l, 210 l and 216.5 l的通口柱桶

This part of ISO 15750 specifies the characteristics and dimensions of removable head (open head) drums, manufactured from steel sheet, having a total capacity of 208 l, 210 l and 216,5 l. It also specifies a method for measuring the total and brimful capacity.

Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l

SAE AS210041-2002 带去干扰端头的FSC 8110抗摩擦封盖的氢氧化锂滤毒罐

This specification covers canisters for shipment and storage of lithium hydroxide (LiOH), to be used in receptacle for CO absorbent (see MIL-R-24159).

Canister, Lithium Hydroxide, Screened Ends, Friction Type Covers FSC 8110

ASTM F926-02(2007) 消费者用手提式煤油和柴油容器提示标签的标准规范

1.1 This specification establishes nationally recognized requirements for the cautionary information to be placed on the label of portable kerosine and diesel containers for consumer use. It is not the intent of this specification to preclude any other labeling requirements, such as those set forth in Federal Hazardous Substances Act (FHSA) or other applicable regulations and standards.

Standard Specification for Cautionary Labeling of Portable Kerosine and Diesel Containers for Consumer Use

DLA A-A-58020 A VALID NOTICE 1-2001 嵌入聚乙烯的船运铁桶

A-A-58020A, dated 15 April 1994, has been reviewed and determined to be valid for use in acquistion.

DRUMS, SHIPPING, STEEL WITH POLYETHYLENE INSERT

UL 2368-2001 易燃和可燃液体用中间散货容器的火焰暴露试验

1.1 These requirements cover intermediate bulk containers(IBCs)intended for the storage of flammable and combustible liquids within warehouses and other storage areas protected with automatic wet-pipe sprinkler systems 1.2 Requirements for the protection of IBCs are addressed in the National Fire Protection Association (NFPA)，Flammable and Combustible Liquids Code，NFPA 30

UL Standard for Safety Fire Exposure Testing of Intermediate Bulk Containers for Flammable and Combustible Liquids First Edition

DLA MS24347 REV F NOTICE 3-2001 运输和储存的可再度使用的铁桶

MS24347F is inactive for new design and is no longer used except for replacement purposes.

DRUM, METAL REUSABLE, SHIPPING AND STORAGE

DLA MS24347 REV F REINST NOTICE 2-2001 运输和储存的可再度使用的铁桶

MS24347F, dated 15 DECEMBER 1987, is hereby reinstated and may be used for acquisition.

DRUM, METAL REUSABLE, SHIPPING AND STORAGE

DIN 6646:2001 包装方法.钢制非移动盖和移动盖式鼓形桶.跌落处理

The document specifies drop handles for steel drums with a contens of max 62 l in according with DIN EN 209 and DIN EN 210.

Means of packaging - Non-removable head (tight head) and removable head (open head) drums made of steel - Drop handle

AS/NZS 2906:2001 燃料容器－便携式－塑料与金属

Specifies material, design, properties (including test methods) and marking requirements for refillable portable petroleum-product fuel containers made of metal or plastics, and of capacity up to and including 25 L. It applies to containers for the storage and transport of fuel, and fuel tanks for boats. The containers are suitable for use with unleaded, leaded and super grades of petrol, two-stroke engine fuel and kerosene, but are excluded from use with racing fuels unless specifically approved by the manufacturer.

Fuel containers - Portable-plastic and metal

GOST 30766-2001 化学品储罐.通用规范

Tins for chemical products. General specifications

GOST 30765-2001 金属运输包装.通用规范

Metal transport packagings. General specifications

SAE AS6055-2001 FSC8110可重复使用金属辊筒,运输和存储工具(第88至510立方英寸)

This standard gives instructions on the use, and re-use, of metal drums in shipping and storage.

Drum, Metal Reusable, Shipping and Storage (Cap. from 88 to 510 Cubic Inches) FSC 8110

DIN 6141:2000 包装材料.纤维板带盖桶.钢制的底和盖

Packaging - Fibreboard drums - Bottom and lid made of steel

NF H34-037*NF EN 12712:2000 塑料汽油桶.托板尺寸为800mm x 1200mm,1000mm x 1200mm,1140mm x 1140mm的优先选用的20升和60升标称容量的汽油桶

Plastics jerricans - Jerricans with a nominal capacity of 20 l ů 60 l for optimal utilization of pallets sizes 800 mm x 1200 mm, 1000 mm x 1200 mm et 1140 mm x 1140 mm.