55.200 包装机械 标准查询与下载

LST EN 415-3-2002+A1-2010 包装机的安全性 第3部分：成型、填充和密封机

Safety of packaging machines - Part 3: Form, fill and seal machines

LST EN 415-6-2007+A1-2010 包装机的安全性 第6部分：托盘包装机

Safety of packaging machines - Part 6: Pallet wrapping machines

DS/EN 415-3+A1:2010 包装机的安全性 第3部分：成型、填充和密封机

This European Standard establishes safety requirements for form, fill and seal packaging machines and the filling machines which are particularly associated with them. This group of machines is defined in detail in clause 3 of this standard, with diagrams illustrating examples of the principle of operation of each machine type. However briefly, this standard covers the following broad groups of machines:- horizontal form, fill and seal machines;- vertical form, fill and seal machines;- pre-made bag erect fill and seal machines;- mandrel flexible package or carton form, fill and seal machines;- carton erect, fill and close machines;- thermoform, fill and sea

Safety of packaging machines - Part 3: Form, fill and seal machines

NF H94-001-5/IN1*NF EN 415-5/IN1:2010 包装机械安全性.第5部分:打包机

Safety of packaging machines - Part 5 : wrapping machines.

DS/EN 415-5+A1:2009 包装机的安全性 第5部分：包装机

This European Standard applies to the following groups of machines:- wrapping machines which partially wrap products (see Figures 1-4)- wrapping machines which form a complete wrap without sealing (see Figures 5-7)- wrapping machines which form a complete wrap with sealing (see Figures 8-14)- shrinking equipment which is connected to wrapping machines covered by this standard (see Figures 15-16)The individual machines are described in 3.2 of this standard.This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of wrapping machines.The extent to which

Safety of packaging machines - Part 5: Wrapping machines

NF H94-001-3/IN1:2009 包装机械的安全性.第3部分:成型、灌装及封口机

Safety of packaging machines - Part 3 : form, fill and seal machines.

NF H94-001-3:2009 包装机的安全性.第3部分:成形、填充和密封机

Safety of packaging machines - Part 3 : form, fill and seal machines.

DIN EN 415-7:2009 包装机械的安全.第7部分:组件和二次包装机械,德文版本EN 415-7:2006+A1:2008

This European Standard applies to the following groups of machines: Group and secondary packaging machines and the collating systems associated with them. The individual machines are described in 3.2 of this European Standard. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of group and secondary packaging machines. The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4. Exclusions This European Standard is not applicable to the following machines: -- machines that were manufactured before the date of publication of this document by CEN; -- strapping machines. These machines are covered by EN 415-8; -- crate loaders and un-loaders for pre-formed rigid containers. These machines are covered by EN 415-2; -- cartoning machines. Cartoning machines are covered by EN 415-3. This European Standard does not consider the following hazards: -- use of group and secondary packaging machines in potentially explosive atmospheres; -- health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; -- hazards that may be associated with electromagnetic emissions from group and secondary packaging machines; -- hazards that may be associated with decommissioning group and secondary packaging machines.

Safety of packaging machines - Part 7: Group and secondary packaging machines(includes Amendment A1:2009); English version of DIN EN 415-7:2009-12

EN 415-5:2006+A1:2009 包装机械的安全.第5部分:包装机

This European Standard applies to the following groups of machines: wrapping machines which partially wrap products (see Figures 1-4) wrapping machines which form a complete wrap without sealing (see Figures 5-7) wrapping machines which form a complete wrap with sealing (see Figures 8-14) shrinking equipment which is connected to wrapping machines covered by this standard (see Figures 15-16) The individual machines are described in 3.2 of this standard. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of wrapping machines. The extent to which hazards, hazardous situations and events are covered are indicated in Clause 4 of this document. Exclusions: This standard is not applicable to larger examples of wrapping machines designed to handle products higher than 400 mm and wider than 400 mm. These machines are covered by EN 415-6. This document is not applicable to wrapping machines which are manufactured before the date of publication of this document by CEN. This standard does not consider the following hazards: Use of wrapping machines in potentially explosive atmospheres; Health, safety or hygiene hazards associated with the products that may be handled by the machines but does include general advice on this subject; Hazards that may be associated with electromagnetic emissions from wrapping machines; Hazards that may be associated with decommissioning wrapping machines.

Safety of packaging machines - Part 5: Wrapping machines

GSO EN 415-2:2009 包装机安全 第2部分：固体成型包装机

This standard specifies the safety requirements for the design and manufacture of pre-formed rigid container packaging machinery and the information that should be made available to the user of these machines. All the significant hazards (see clause 4) arising from the machines included in this part of the standard are covered except for hazards associated with ancillary equipment for evacuating gases, cooling/refrigeration equipment associated with packaging machines, steam services supplying packaging machines, substances being filled (see annex C for guidance), hygiene principles (see annex D for guidance) and substances for cleaning/sterilising (see annex E for guidance). The following machines are included: - Filling machines (other than cask, keg and barrel filling machines) - Capping, closing and sealing/seaming machines - Container cleaning machines (other than cask, keg and barrel cleaning machines) - In-line and rotary rinsing and air cleaning machines - Labelling, decorating, coding and marking machines - Decapping/unscrewing machines - Inspection and ejection machines - Machines that apply wiring to secure stoppers in bottles - Machines which rinse, inspect, fill, seal and label containers - Keg and cask turning, pushing, cleaning and filling machines (but not multi-lane plants) - Packing, unpacking and unscrambling machines - Unpressurised pasteurisers and back-cooling machines - Vertical and horizontal sterilising machines For information, schematic drawings showing typical combinations of rigid container packaging machines for beverages are included (see Figures 1, 2 and 3). The following machines are not included: - Aerosol Filling and Sealing - Multi-lane Kegging plants - Conveyor systems which link packaging machines (they are dealt with by prEN 617, prEN 618, prEN 619, prEN 620 and prEN 741) Before this standard is used a hazard identification and risk assessment shall be carried out to check that the hazards for the machine to be designed are the same as those identified in this standard. This standard applies to machines which are manufactured after the date of issue of this standard.

Packaging machines safety - Part 2 : Pre-formed rigid container packaging machines

EN 415-3:1999+A1:2009 包装机械的安全.第3部分:形式,填充和密封机

This European Standard establishes safety requirements for form, fill and seal packaging machines and the filling machines which are particularly associated with them. This group of machines is defined in detail in clause 3 of this standard, with diagrams illustrating examples of the principle of operation of each machine type. However briefly, this standard covers the following broad groups of machines: horizontal form, fill and seal machines; vertical form, fill and seal machines; pre-made bag erect fill and seal machines; mandrel flexible package or carton form, fill and seal machines; carton erect, fill and close machines; thermoform, fill and seal machines. Filling machines commonly fitted to form, fill and seal machines including: auger fillers; volumetric cup fillers; volumetric piston fillers; counters; gravimetric fillers (weighers). This standard covers the safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning. This part of EN 415 applies primarily to machines manufactured after the date of issue of this standard. This standard does not cover in detail the safety or hygiene hazards associated with the products which may be handled on form, fill and seal machines, but does include general advice. This standard does not cover thermoforming machines. These machines are covered in prEN 12409. This standard does not cover blow mould, fill and seal machines. The main hazards and safety requirements for these machines are described in EN 422. This document is not applicable to form, fill and seal machines which are manufactured before the date of its publication as EN 415-3:1999 as amended.

Safety of packaging machines - Part 3: Form, fill and seal machines

GOST R 53523-2009 公共餐饮 预制件企业通用要求

Public catering. General requirements for prefabricate enterprises

LST EN 415-7-2006+A1-2008 包装机的安全性 第7部分：成组包装机和二次包装机

Safety of packaging machines - Part 7: Group and secondary packaging machines

DIN EN 415-8:2008 包装机械的安全性.第8部分:捆包机

This European Standard applies to the following groups of machines: -- powered hand strapping tools; -- semi-automatic strapping machines; -- automatic strapping machines; -- horizontal pallet strapping machines; -- vertical pallet strapping machines. The individual machines are described in 3.3. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of strapping machines. The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4. Exclusions This European Standard is not applicable to the following machines: -- strapping tools that are powered exclusively by manual effort; -- strapping machines that were manufactured before the date of publication of this document by CEN. This European Standard does not consider the following hazards: -- the use of strapping machines in potentially explosive atmospheres; -- the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; -- hazards that can be associated with electromagnetic emissions from strapping machines; -- hazards that can be associated with decommissioning strapping machines.

Safety of packaging machines - Part 8: Strapping machines; English version of DIN EN 415-8:2008-06

BS EN 415-8:2008 包装机械的安全.捆包机

This European Standard applies to the following groups of machines:  powered hand strapping tools;  semi-automatic strapping machines;  automatic strapping machines;  horizontal pallet strapping machines;  vertical pallet strapping machines. The individual machines are described in 3.3. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of strapping machines. The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4. Exclusions This European Standard is not applicable to the following machines:  strapping tools that are powered exclusively by manual effort;  strapping machines that were manufactured before the date of publication of this document by CEN. This European Standard does not consider the following hazards:  the use of strapping machines in potentially explosive atmospheres;  the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;  hazards that can be associated with electromagnetic emissions from strapping machines;  hazards that can be associated with decommissioning strapping machines.

Safety of packaging machines - Part 8: Strapping machines

YB/T 4085-2008 金属材料捆扎机械通用技术条件

General technical conditions of banding machines for metallic materials

EN 415-7:2006+A1:2008 包装机的安全性.第7部分:批量包装机和二次包装机

This European Standard applies to the following groups of machines: Group and secondary packaging machines and the collating systems associated with them. The individual machines are described in 3.2 of this European Standard. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of group and secondary packaging machines. The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4. This European Standard is not applicable to the following machines: machines that were manufactured before the date of publication of this document by CEN; strapping machines. These machines are covered by EN 415-8; crate loaders and un-loaders for pre-formed rigid containers. These machines are covered by EN 415-2; cartoning machines. Cartoning machines are covered by EN 415-3. This European Standard does not consider the following hazards: use of group and secondary packaging machines in potentially explosive atmospheres; health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; hazards that may be associated with electromagnetic emissions from group and secondary packaging machines; hazards that may be associated with decommissioning group and secondary packaging machines.

Safety of packaging machines - Part 7: Group and secondary packaging machines

LST EN 415-8-2008 包装机的安全性 第8部分：捆扎机

Safety of packaging machines - Part 8: Strapping machines

DS/EN 415-8:2008 包装机的安全性 第8部分：捆扎机

This European Standard applies to the following groups of machines:- powered hand strapping tools;- semi-automatic strapping machines;- automatic strapping machines;- horizontal pallet strapping machines;- vertical pallet strapping machines.The individual machines are described in 3.3.This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of strapping machines.The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4.ExclusionsThis European Standard is not applicable to the following machines:- strapping too

Safety of packaging machines - Part 8: Strapping machines

KS T 1108-2007(2022) 包装机的安全第2部分:预成型刚性容器包装机

Safety of packaging machines－Part 2：Pre-formed rigid container packaging machines