59.100.20 碳纤维材料 标准查询与下载
共找到 226 条与 碳纤维材料 相关的标准，共 16 页
Test method for thermal conductivity of blast furnace carbon blocks
- ICS
- 59.100.20
- CCS
- Q52
- 发布
- 2016-01-15
- 实施
- 2016-07-01
Carbon block alkali resistance test method
- ICS
- 59.100.20
- CCS
- Q52
- 发布
- 2016-01-15
- 实施
- 2016-07-01
本标准规定了高炉炉衬用自焙炭块的分类、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于高炉用自焙炭块。
Self-baking carbon block for blast furnace
- ICS
- 59.100.20
- CCS
- Q52
- 发布
- 2016-01-15
- 实施
- 2016-07-01
本标准规定了炭块尺寸及外观检查的工具及方法。 本标准适用于经机械加工的高炉、矿热炉用炭块等产品尺寸及外观的检查。
Method for dimensions and aspect for the carbon block
- ICS
- 59.100.20
- CCS
- Q52
- 发布
- 2016-01-15
- 实施
- 2016-07-01
本标准规定了普通高炉炭块的技术要求、试验方法、检验规则、包装、标志、储存、运输和质量证明书。 本标准适用于1350℃以上煅烧的无烟煤为主要原料制成的，用以砌筑高炉内衬的炭块。
Carbon block for blast furnace
- ICS
- 59.100.20
- CCS
- Q52
- 发布
- 2016-01-15
- 实施
- 2016-07-01
Scope is not provided for this standard
Carbon fibre -- Determination of volume resistivity
- ICS
- 59.100.20
- CCS
- 发布
- 2015-12-21
- 实施
本标准规定了碳纤维中硅、钾、钠、钙、镁和铁含量测定方法。本标准适用于丝束、长丝、短纤维、机织物、编织物等碳纤维制品。
Determination of silicon,potassium,sodium,calcium,magnesium and iron content in carbon fiber
- ICS
- 59.100.20
- CCS
- Q36
- 发布
- 2015-07-14
- 实施
- 2016-01-01
本标准规定了炼钢用增碳剂的粒度规格、技术要求、试验方法、检验规则、包装、标志、贮存、运输和质量证明书。 本标准适用于炼钢使用的增碳剂。
Recarburizers for steelmaking
- ICS
- 59.100.20
- CCS
- Q52
- 发布
- 2015-04-30
- 实施
- 2015-10-01
本标准规定了硅钢连续退火炉用炭套的术语和定义、分类和代号、技术要求、试验方法、检验规则、包装、标志、运输、贮存和质量证明书。 本标准适用于辊底式硅钢连续退火炉中钢带传输的炭套。
Carbon sleeve for silicon steel in continuous annealing furnace
- ICS
- 59.100.20
- CCS
- Q52
- 发布
- 2015-04-30
- 实施
- 2015-10-01
Carbon fiber. Determination of density of high-modulus carbon fibers
- ICS
- 59.100.20
- CCS
- Q53
- 发布
- 2015
- 实施
- 2017-01-01
Carbon fiber. Determination of thermal oxidative resistance of carbon fibers
- ICS
- 59.100.20
- CCS
- Q53
- 发布
- 2015
- 实施
- 2017-01-01
Carbon fibre. Methods for determination of volume resistivity
- ICS
- 59.100.20
- CCS
- Q53
- 发布
- 2015
- 实施
- 2016-07-01
This International Standard specifies four test methods which may be used for the determination of the diameter and cross-sectional area of single carbon fibre filaments. It is important to note that the shape of the cross-section of the filaments from different suppliers may vary significantly. The term "diameter" used in this standard applies to all cases, from a "true" diameter, where the filament is exactly circular in cross-section, to an "apparent" diameter where the filament is not circular. The methods proposed may not be directly applicable to all types of filament. The product specification should specify which method should be used. If there is no specification, the selection of the appropriate method is a matter of judgement. The details given here are considered to be sufficiently precise to enable this choice to be made.
Carbon fibre -- Determination of filament diameter and cross-sectional area
- ICS
- 59.100.20
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard specifies a method of test for the determination of the tensile properties of a single-filament specimen. The method is applicable to single filaments of carbon fibres, taken from multifilament yarns, strands, tows, staple fibres, staple yarns, woven fabrics, braids and knits.
Carbon fibre -- Determination of the tensile properties of single-filament specimens
- ICS
- 59.100.20
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard specifies test methods for the determination of the size content of carbon fibre yarn. It is applicable to continuous-filament yarns and staple-fibre yarns.
Carbon fibre -- Determination of size content
- ICS
- 59.100.20
- CCS
- 发布
- 2014-12-25
- 实施
이 표준은 탄소섬유 직물의 시험방법에 대하여 규정한다.
Testing methods for carbon fibre woven fabrics
- ICS
- 59.100.20
- CCS
- 发布
- 2014-11-14
- 实施
- 2014/11/14
Testing methods for carbon fibre woven fabrics
- ICS
- 59.100.20
- CCS
- 发布
- 2014-11-14
- 实施
本标准规定了等静压石墨的牌号表示及分类、技术要求、试验方法、检验规则、包装、标志、储存、运输和质量证明书。本标准适用于以优质石油焦、沥青焦等为主要原料,经制粉(平均粒径小于25μm)、混捏、等静压成型、焙烧、浸渍、石墨化等工艺过程制成的石墨制品。
Isostatic graphite
- ICS
- 59.100.20
- CCS
- Q51
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了石墨化增碳剂的粒度规格、技术要求、试验方法、检验规则、包装、标志、贮存、运输及质量证明书。本标准适用于以石油焦为原料,经高温石墨化处理制备的供钢铁冶炼及铸造行业增碳用的石墨化增碳剂,也适用于生产炭石墨材料的对碳含量和硫含量要求较高的原料。
Graphitized recarburizer
- ICS
- 59.100.20
- CCS
- Q51
- 发布
- 2014-05-06
- 实施
- 2014-10-01
Carbon fibre. Determination filament's tensile properties
- ICS
- 59.100.20
- CCS
- 发布
- 2014
- 实施
- 2015-09-01
