59.140.30 皮革和裘皮 标准查询与下载

OENORM EN ISO 15701:2021 皮革 色牢度测试 迁移到聚合物材料中的色牢度（ISO/DIS 15701:2021）

Leather - Tests for colour fastness - Colour fastness to migration into polymeric material (ISO/DIS 15701:2021)

DIN EN ISO 10195:2021 皮革 皮革中铬（VI）含量的化学测定 皮革的热预老化和六价铬的测定（ISO 10195:2018）；德文版 EN ISO 10195:2021

This document specifies a thermal pre-ageing procedure for leather to obtain indications about the tendency to the formation of hexavalent chromium under specified conditions and the determination of hexavalent chromium according to ISO 17075-1 or ISO 17075-2. This thermal pre-ag

Leather - Chemical determination of chromium(VI) content in leather - Thermal pre-ageing of leather and determination of hexavalent chromium (ISO 10195:2018); German version EN ISO 10195:2021

BS EN ISO 10195:2021 皮革 皮革中六价铬含量的化学测定 皮革热预老化及六价铬的测定

1   Scope This document specifies a thermal pre-ageing procedure for leather to obtain indications about the tendency to the formation of hexavalent chromium under specified conditions and the determination of hexavalent chromium according to ISO 17075‑1 or ISO 17075‑2. This thermal pre-ageing procedure does not simulate any real condition in leather production or use. It is applicable to all types of chromium tanned leather.

Leather. Chemical determination of chromium(VI) content in leather. Thermal pre-ageing of leather and determination of hexavalent chromium

T/XJPGSH 0001-2021 无铬鞣皮革

（1）无铬鞣皮革定义； （2）有害物质限量要求； （3）理化性能要求； （4）试验方法； （5）检验规则 （6）验收、标志、包装、运输和贮存。

Chrome-free leather

OENORM EN ISO 18219-1:2021 皮革 皮革中氯代烃的测定 第1部分：短链氯化石蜡（SCCP）的色谱法（ISO 18219-1:2021）

Leather - Determination of chlorinated hydrocarbons in leather - Part 1: Chromatographic method for short-chain chlorinated paraffins (SCCPs) (ISO 18219-1:2021)

OENORM EN ISO 18219-2:2021 皮革 皮革中氯代烃的测定 第2部分：中链氯化石蜡（MCCPs）的色谱法（ISO 18219-2:2021）

Leather - Determination of chlorinated hydrocarbons in leather - Part 2: Chromatographic method for middle-chain chlorinated paraffins (MCCPs) (ISO 18219-2:2021)

T/ZZB 2432-2021 服装用貉子毛皮

本文件规定了服装用貉子毛皮的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺等内容。 本文件适用于成人服装用貉子毛皮。

Chinese raccoons for garment

T/ZZB 2433-2021 服装用狐狸毛皮

本文件规定了服装用狐狸毛皮的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺等内容。 本文件适用于成人服装用狐狸毛皮。 本文件不适用于沙狐毛皮。

Fox fur for garment

ASTM D7584-16(2021) 评估环境室中湿蓝色和湿白色表面对真菌生长的抗性的标准试验方法

1.1 This environmental chamber method measures the resistance of the treated Wet Blue and Wet White to the germination of spores and subsequent vegetative growth over a period of four weeks. The test method is useful in estimating the performance of fungicides and should assist in the prediction of storage time of Wet Blue and Wet White before fungal growth begins. The apparatus is designed so it can be easily built or obtained by any interested party and duplicate the natural environment in which Wet Blue and Wet White is inoculated with fungal spores. Spores that germinate on untreated or treated Wet Blue and Wet White can produce fungal growth, resulting in disfigurement or discoloration, or both, of the Wet Blue and Wet White. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber

ASTM D1814-70(2021) 测量皮革单位厚度的标准试验方法

1.1 This test method covers the measurement of the thickness of units of all types of leather. It is not suitable for measuring the thickness of test specimens. 1.2 The thickness of leather units may be reported in millimetres, ounces, or irons. Ounces are generally used when referring to the thickness of shoe upper leather. Irons are generally used when referring to the thickness of sole leather. (One ounce equals 1⁄64 in. or 0.0156 in. or 0.396 mm. One iron equals 1⁄48 in. or 0.0208 in. or 0.53 mm.) 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Thickness of Leather Units

ASTM D4576-16(2021) 湿蓝色和湿白色抗霉菌生长的标准试验方法

1.1 This test method covers the determination of mold growth resistance of Wet Blue and Wet White subject to storage and shipping requirements and intended for use in leather manufacturing. This test method may not be suitable to evaluate fungicides that are inactivated by proteins. This includes alkyldimethylbenzyl ammonium chlorides. 1.2 Conclusions about mold growth resistance are drawn from the results by comparing the test with a simultaneously run control of known resistance. Success or failure is determined by the amount of mold growth relative to the control. 1.3 To allow use of this test method by any laboratory, flexibility has been permitted in times, temperature, and humidity of incubation, inoculum, hide sampling area, and choice of control. These may be adjusted to fit local conditions but must be standardized. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White

ASTM D2212-00(2021) 皮革耐撕裂性的标准试验方法

1.1 This test method covers the determination of the slit tear resistance of light leathers such as shoe uppers, gloves, and upholstery. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Slit Tear Resistance of Leather

ASTM D2207-00(2021) 用球法测定皮革爆裂强度的标准试验方法

1.1 This test method covers the determination of the bursting strength of leather by the ball method. It may be used to test a large variety of leathers and leather products. It is particularly applicable to lightand medium-weight leathers, such as shoe uppers and garments. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Bursting Strength of Leather by the Ball Method

ASTM D7967-21 用原子吸收法或ICP分析蓝湿革中铬含量（如Cr2O3）的标准试验方法

1.1?This test method covers the Atomic Absorption procedure, using nitrous oxide-acetylene flame, air-acetylene flame or ICP (Inductively coupled plasma) to analyze the chrome content of Wet Blue (and leather) on a moisture-free basis. 1.2?The values stated in SI units are to b

Standard Test Method for Analysis of Chrome Content (as Cr2O3) in Wet Blue using Atomic Absorption or ICP

OENORM EN ISO 14087:2021 皮革 物理和机械试验 弯曲力的测定（ISO/DIS 14087:2021）

Leather - Physical and mechanical tests - Determination of bending force (ISO/DIS 14087:2021)

ASTM D2209-00(2021) 皮革拉伸强度的标准试验方法

1.1 This test method covers the determination of the load required to rupture a leather test specimen having a 1⁄2-in. (12.7-mm) width. The load to rupture divided by the original unstretched cross-sectional area gives the tensile strength. It may be used for all types of leather that are smooth and firm enough to permit accurate thickness measurements. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Tensile Strength of Leather

ASTM D1516-05(2021) 皮革宽度的标准试验方法

1.1 This test method covers determination of the width of physical test specimens and of regularly shaped units and pieces of all types of leather. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Width of Leather

ASTM D1815-00(2021) 植物鞣制皮革吸水性（静态）的标准试验方法

1.1 This test method covers the determination of the amount of water absorbed by leather at 23 6 2 °C by immersion under static conditions. It may be used on all types of leather, but is particularly adapted to vegetable-tanned sole leather. This test method does not apply to wet blue. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather

ASTM D7674-14a(2021) 湿蓝色和湿白色中己烷/石油醚提取物的标准试验方法

1.1 This test method covers the quantitative extraction of all types of wet blue and wet white with hexane or petroleum ether. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see Section 7. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White

ASTM D6714-16(2021) 灰化湿蓝色中氧化铬的标准试验方法（高氯酸氧化）

1.1 This test method covers the determination of chromic oxide in Wet Blue that has been partly or completely tanned with chromium compounds. In general the samples will contain chromium content between 1 and 5 %, calculated as chromic oxide expressed upon a dry basis otherwise referred to as moisture-free basis (mfb). 1.2 This test method is specific in that it applies to a sample or samples that are the resultant ash following the execution of Test Method D6716. 1.3 This test method does not apply to Wet White. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards are given in Section 8. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)