61.020 服装 标准查询与下载

KS K ISO 8559-3-2023 衣服的尺码名称.第3部分:身体测量表和间隔的编制方法

Size designation of clothes — Part 3: Methodology for the creation of body measurement tables and intervals

T/CNTAC 137-2023 扎染服饰

本文件规定了扎染服饰的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以机织和针织扎染面料为主制作的，以及经过扎染工艺处理的服装、帽子、围巾、领带、手套、袜子、包等服饰产品。扎染家用纺织产品可参照执行。 本文件不适用于年龄在36个月及以下的婴幼儿服饰。

Tie-dyed apparel and accessories

T/SHDSGY 011-2023 服装生产工艺流程规范

本文件规定了服装生产的工艺流程、检验项目、工艺要求及检测报告的要求。 本文件适用于服装生产工艺流程。

Clothing production process specification

T/SHDSGY 009-2023 服装设计要求

本文件规定了服装设计的基本原则、人员职责与设计流程的要求。 本文件适用于服装设计。

Requirements for fashion design

T/CNTAC 138-2023 质量分级及“领跑者”评价要求 羊毛衫

本文件规定了绵羊毛含量在30%及以上的纯纺或混纺羊毛衫质量及企业标准水平评价的术语和定义、评价指标体系和评价方法及等级划分。 本文件适用于羊毛衫质量和企业标准水平评价。相关机构开展质量分级和企业标准水平评估、“领跑者”评价以及相关认证时可参照使用，相关企业在制定企业标准时可参照本文件。 本文件不适用于年龄在36个月及以下的婴幼儿羊毛衫产品。

"Assessment requirements for quality grading and forerunner — Woollen sweater"

T/SHDSGY 010-2023 服装行业管理系统

本文件规定了服装管理系统的技术要求、试验方法、检验规则以及标志、包装、运输以及贮存。 本文件适用于服装管理系统。

Garment industry management system

T/QGCML 634-2023 抑菌防感染内衣

本标准规定了抑菌防感染内衣的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于抑菌防感染内衣的生产及检验。

antibacterial anti-infection underwear

T/QGCML 636-2023 透气耐磨弹性面料

本标准规定了透气耐磨弹性面料的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存。      本标准适用于透气耐磨弹性面料的生产及检验。

Breathable wear-resistant elastic fabric

T/QGCML 632-2023 女士毛衫定制设计通用技术要求

本标准规定了女士毛衫定制设计通用技术要求的术语和定义、流程、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于女士毛衫定制的生产、设计及检验。

General technical requirements for custom design of women's sweaters

T/CTES 1054-2023 基于电商消费者体验纺织制品 遮热透湿防晒服

本文件规定了基于电商消费者体验的纺织制品遮热透湿防晒服的使用说明、要求、检验方法、抽样及判定规则、包装、运输和贮存。 本文件适用于以纺织织物为主要面料生产的遮热透湿防晒服。 本文件不适用于年龄在36个月及以下的婴幼儿遮热透湿防晒服。

Textile products based on e-commerce consumer experience-Sun-protective clothing with thermal and humidity permeability

BS ISO 8559-4:2023 服装尺码指定 体型表覆盖率的确定

1   Scope This document describes the calculation of coverage ratios of body measurement tables in comparison with two or three selected body dimensions of the targeted population. NOTE Theoretically, the calculation of the coverage ratios can be extended to further dimensions. Practically, carrying out calculations based on 4 or more dimensions, leading to low percentages, face difficulty in getting easy visual illustrations and has not been found relevant. This document is applicable to body measurement tables only if a database of body dimensions of the targeted population is available.

Size designation of clothes - Determination of the coverage ratios of body measurement tables

ISO 8559-4:2023 衣服的尺码名称.第4部分：人体测量表覆盖率的测定

This document describes the calculation of coverage ratios of body measurement tables in comparison with two or three selected body dimensions of the targeted population. NOTE Theoretically, the calculation of the coverage ratios can be extended to further dimensions. Practically, carrying out calculations based on 4 or more dimensions, leading to low percentages, face difficulty in getting easy visual illustrations and has not been found relevant. This document is applicable to body measurement tables only if a database of body dimensions of the targeted population is available.

Size designation of clothes — Part 4: Determination of the coverage ratios of body measurement tables

ASTM D4118-23 机织覆盖物、工装裤、整体和车间涂层织物的标准性能规范

1.1 This performance specification covers woven fabrics, composed of any textile fiber or mixture of textile fibers, to be used in the manufacture of coveralls, dungarees, overalls and shop coats. 1.2 This performance specification recognizes two levels of wearing severity relative to performance requirements for these fabrics. 1.3 This performance specification is not applicable to woven fabrics intended for use in the manufacture of industrial-protective clothing. 1.4 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics

ASTM D3995-23 针织职业服装织物的标准性能规范:服装和职业

Standard Performance Specification for Knitted Career Apparel Fabrics: Dress and Vocational

ASTM D3996-23 针织泳装织物的标准性能规范

1.1 This performance specification covers circular and warp knitted fabrics for use in knit swimwear, composed of any textile fiber or mixture of textile fibers. 1.2 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Knit Swimwear Fabrics

ASTM D7268-23 包括贴身衣物和泳装在内的无缝针织服装的标准性能规范

1.1 This specification covers the evaluation of specific performance characteristics of importance in seamless knit garments, including camisoles, panties, slips, girdles and swimwear. 1.2 The following safety hazards caveat pertains only to the test methods described in this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear

ASTM D4232-23 机织职业服装织物的标准性能规范:服装和职业

1.1 This performance specification covers the performance requirements for woven fabrics for career apparel: dress and vocational. 1.2 This performance specification is not applicable to career apparel fabrics that do not patently fit the category of Career Dress Apparel. Performance specifications for such fabrics should be as agreed to between the purchaser and the seller. This performance specification is not applicable to overcoat or topcoat uniform fabrics. 1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Woven Career Apparel Fabrics: Dress and Vocational

T/ZFB 0031-2022 浙江省市场监管系统制服 短款防寒服

本文件规定了浙江省市场监管系统制服--短款防寒服的要求、试验方法、检验规则、标志、包装、运输和贮存。

Uniform of Zhejiang market supervision system Short winter clothing

T/ZFB 0030-2022 浙江省市场监管系统制服 单裤

本文件规定了浙江省市场监管系统制服--单裤的要求、检验规则、包装、运输及贮存。

Uniform of Zhejiang market supervision system Unlined pants

T/ZFB 0029-2022 浙江省市场监管系统制服 冬执勤服

本文件规定了浙江省市场监管系统制服--冬执勤服的要求、检验规则、包装、运输及贮存。

Uniform of Zhejiang market supervision system Winter duty clothes