65.060.20 耕作机械 标准查询与下载

KS B 7916-1994(2009) 任命管理犁保湿尺寸

Dimension of plow share for cultivator

ISO 5678:1993 农业机械 土壤耕作设备 S型齿:主要尺寸和齿间距

Specifies the main dimensions and clearance zones for harrow and cultivator S-tines, type 0 to 3.

Agricultural machinery; equipment for working the soil; S-tines: main dimensions and clearance zones

ISO 8947:1993 农业机械 土壤耕作设备 S型齿:试验方法

The aim of the test (bending in direction of travel, lateral bending, variation in working depth and in soil penetration angle, permanent deformation, fatigue) is to give reproducible results to compare the quality of S-tines. Applies to S-tines as specified in ISO 5678; the test method can also be used to test other similar products.

Agricultural machinery; equipment for working the soil; S-tines: test method

CSN ISO 5680:1992 土壤耕作设备．耕田机的尖齿和铲子．主要安装尺寸

Zpracovatel: V?zkumn? ústav zemědělsk?ch stroj?, Praha, I?O 010162, Ing. Petr Jaro? Pracovník Federálního ú?adu pro normalizaci a mě?ení. Ing. Jana ?í?ková

Equipment for working soil. Tines and shovels for cultivators. Main fixing dimensions

ISO 4254-5:1992 农林用拖拉机和机械 确保安全的技术方法 第5部分:动力驱动耕地设备

Specifies the special requirements to be met in design. Applies to equipment of class 03 with a power demand of more than 20 kW. Applies additionally to ISO 4254-1.

Tractors and machinery for agricultural and forestry; technical means for ensuring safety; part 5: power-driven soil-working equipment

DIN 11095:1991 农用机械.土壤耕作机具.S型耕耘机叉齿.试验方法

The standard specifies the test method for S-type tines used in working the soil.

Equipment for working the soil; S-type cultivator tines; test method

JB/T 5115-1991 曲柄摇杆式机动水稻插秧机 技术条件

本标准规定了乘座式与步行式曲柄摇杆式机动水稻插秧机的技术要求、检验规则和标志、包装、运输、贮存。 　　本标准适用于以规格化带土苗的曲柄摇杆式机动水稻插秧机。

Crank and rocker type motorized rice transplanter technical conditions

GOST 26738-1991 中耕机.一般技术要求

Blad cultivators. General technical requirements

ISO 5713:1990 土壤耕作设备 土壤耕作部件的固定螺栓

This International Standard specifies dimensions and characteristics of three types of bolts for the fixing of soil working elements.

Equipment for working the soil; fixing bolts for soil working elements

NF U22-216:1990 耕地机具.旋转式中耕机用铲.安装尺寸

Equipment for working the soil. Rotary cultivator blades. Fixing dimensions.

GOST 28516-1990 土壤耕作旋转犁.一般技术要求

Soil working rotary blades. General technical requirements

ISO 8945:1989 土壤耕作机械.旋转式中耕机刀片.安装尺寸

This International Standard specifies the dimensions for four types of rotary cultivator blades. It applies to agricultural rotary cultivator blades with two fixing holes.

Equipment for working the soil; rotary cultivator blades; fixing dimensions

ISO 4197:1989 土壤耕作设备 推土铲 安装尺寸

This second edition cancels and replaces the first edition (1981). Specifies the dimensions of hoe blades with working width up to and including 220 mm. Figure 1 illustrates the contours, dimensions and holes.

Equipment for working the soil; hoe blades; fixing dimensions

BS 7006:1989 牵引式农用压路机规范

Characteristics of coupling devices and dimensions for the section width of rollers used for working the soil.

Specification for trailed agricultural rollers

JIS B 9210:1988 耕作机具用刀

この規格は，鍛造品の耕うんづめについて規定する。ただし，管理作業用づめ，残耕処理づめなどの特殊づめは除く。

Blades for tillers

GOST 27994-1988 农业机器.基本参数和土壤表面耕作用牵挂机具构件连接位置

Machinery for agriculture. Trailer units of shallow tillage equipment. Main dimensions and attachment point

NF U21-002:1987 土壤作业机械和设备.型板犁.作业器件.词汇

Machinery and equipment for working the soil. Mouldboard ploughs. Working elements. Vocabulary.

ISO 8910:1987 土壤耕作机械和设备.模板犁.工作部件.词汇

Machinery and equipment for working the soil — Mouldboard ploughs — Working elements — Vocabulary

NF U22-410:1987 整地机具.压辊截面.连接器和截面宽度

Equipment for working the soil. Roller sections. Coupling and section width.

ISO 8912:1986 土壤耕作机械.镇压器.联接方式和工作幅宽

This International Standard specifies characteristics of coupling devices and lays down dimensions for the section width of trailed agricultural rollers used for working the soil.

Equipment for working the soil; Roller sections; Coupling and section width