65.060.20 耕作机械 标准查询与下载

DIN 11085-1:1986 农业机械和拖拉机.齿耙和碾平耙.第1部分:术语

The standard specifies definitions for different types of toothed harrows and rotary harrows without pto-drive which are used as single implements or in combination with other implements when working the soil. The definitions shall avoid misunderstandings concerning the order, the offer and the delivery of spare parts. Illustrations are given.#,,#

Agricultural machines and tractors; toothed harrows and rotary harrows without pto-drive; terminology

DIN 11085-2:1986 农业机械和拖拉机.电动耙.第2部分:术语

Agricultural machines and tractors; power-driven harrows; terminology

CNS 2180-1985 食品用特殊型金属空罐

本标准适用于食品（不包括碳酸饮料、果汁及啤酒）包装用特殊型金属空罐。

Metal Cans of Irregular Shape for Foods

GOST 6939-1985 沼泽地与沼泽灌木地犁.一般技术条件

Настоящий стандарт распространяется на болотные плуги, предназначенные для вспашки торфяных и минеральных земель, и кустарниково-болотн

Boe and brush-bog ploughs. General specifications

GOST 1114-1984 耕种用吊式中耕机.型式和基本参数

Настоящий стандарт распространяется на навесные и полунавесные культиваторы, предназначенные для междурядной обработки пропашных культ

Tractor mounted hoes. Types and basic parameters

ISO 6880:1983 农业机械.浅耕机具的牵引装置.主要尺寸和连接点

This International Standard lays down the main dimensions and specifies the modular arrangement and above-ground disposi-tion of yokes on bearer frames designed for coupling bearer frames and traction links of soil working equipment. This International Standard applies to shallow trailed tillage equipment with traction resistance up to 1 200 N per metre of the working width.

Machinery for agriculture - Trailed units of shallow tillage equipment - Main dimensions and attachment points

CNS 2056-1982 低压有缝钢管

本标准适用于低压（16 kg∕cm2 以下）之蒸汽，水，气体，及液体等管系所用有缝钢管（以下简称钢管）。

Welded Steel Pipes for Low Pressure Use

DIN ISO 5680:1982 土壤耕作设备.中耕机的齿和铲.主要安装尺寸

Equipment for working the soil; tines and shovels for cultivators; main fixing dimensions

DIN ISO 5679:1982 土壤耕作设备.圆盘耙.分类、主要安装尺寸和技术要求

Equipment for working the soil; disks; classification, main fixing dimensions and specifications

ISO 4197:1981 土壤作业设备.锄头刀片.固定尺寸

Equipment for working the soil — Hoe blades — Fixing dimensions

CNS 6006-1980 耕耘机用接头

本标准适用于步行式动力耕耘机用接头之尺度。

Dimensions of Hitch for Power Tillers

CNS 6013-1980 耕耘刀

本标准适用于一般锻制耕耘刀。

Blades for Tillers

BS 5822:1979 农用圆盘规范：分类、主要固定尺寸和一般要求

Specifies interchangeability dimensions and general requirements for three types of discs.

Specification for agricultural discs: classification, main fixing dimensions and general requirements

NF U22-005:1979 苗床制备用设备.加拿大耙子齿.词汇和规范

Equipment for seed-bed preparation. Tines for canadian harrows. Vocabulary and specifications.

ISO 5680:1979 土壤耕作设备 中耕机的齿和铲 主要安装尺寸

Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing of various types of shovels having a working width of up to 400 mm. The following fixing types are specified: type 1 - one hole; - type 2 - two holes; type 3 - two holes, heavy type.

Equipment for working soil; Tines and shovels for cultivators; Main fixing dimensions

ISO 5679:1979 土壤耕作设备 圆盘耙 分类、主要安装尺寸和规范

Specifies interchangeability dimensions for agricultural disks of the same type and nominal size, classified as types A, B, and C. Applies to disks as working parts of ploughs, harrows, and disk-tillers. Tabulates concave disks type B, variant 1 and 2, and type C (table 1), type B, variant 3 (table 2), and tolerances for eccentricity and wobble of disk types B and C (table 3). The figures 1 to 4 illustrate profiles and sections.

Equipment for working the soil; Disks; Classification, main fixing dimensions and specifications

NF U21-102:1978 土壤作业设备.犁.纪录卡.标准格式

Soil working equipment. Ploughs. Record cards. Standard layout.

CNS 3469-1978 金属楔

本标准适用于各种船舰建造及机器工场作业用之金属楔。

Metal Wedge

ISO/TR 4122:1977 土壤耕作设备 平耙的尺寸 A 型

Equipment for working the soil; Dimensions of flat disks; Type A