65.060.99 其他农业机械和设备 标准查询与下载

JB/T 7876.2-1999 手动泵.技术条件

本标准规定了手动泵的技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于抽送常温清水，以人力为动力驱动的活塞泵、隔膜泵及螺杆泵。其它型式的人力泵也可参照执行。

Technical requirements for hand pump

JB/T 7876.1-1999 手动泵.型式与基本参数

本标准规定了手动泵的定义、型式、型号和基本参数等。 本标准适用于抽送常温清水，以人力为动力驱动的活塞泵、隔膜泵及螺杆泵。其它型式的人力泵也可参照执行。

Types and basic parameters for hand pump

JB/T 7874-1999 种植机械.术语

本标准规定了播种、栽种和栽植机械及与之有关的术语。 本标准适用于播种、栽种和栽植机械。

Sowing and planting machinery.Terminology

JB/T 7766.1-1999 指轮式搂草机.技术条件

本标准规定了指轮式搂草机的技术要求，检验规则及标志、包装、贮存的要求。 本标准适用于在每公顷产干牧草 750～6000kg 的平坦草场上，完成搂草及翻草作业的指轮式搂草机。

Technical specifications for finger wheel tedders

JB/T 7875-1999 植物保护机械 术语

本标准规定了与植物保护机械有关的术语及其定义。

Equipment for crop protection.Vocabulary

JB/T 7876.3-1999 手动泵.试验方法

本标准规定了手动泵的性能试验、泄漏试验和可靠性试验的条件、装置、精度和方法及参数测量、计算方法、试验报告格式等。 本标准适用于抽送常温清水，以人力为动力驱动的活塞泵、隔膜泵及螺杆泵。其它型式的人力泵也可参照执行。

Test methods for hand pump

DS/ISO 11788-1:1998 农业信息系统之间的电子数据交换 农业数据元素词典 第1部分：一般描述

The data elements described in ISO 11788 are intended for communication between on-farm process computers and management computers. This part of ISO 11788 specifies how an agricultural data element dictionary (ADED) may be used for on-farm data exchange. ADED data elements may be used for: - direct data exchange between process computer and management program; - data exchange between process computer and interface software of the process computer on the management computer (PC); - data exchange between the interface software for the process computer on the PC and the management program.

Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 1: General description

GH/T 1004-1998 MFBD型钢丝打扣机

MFBD type steel wire knotter

GH/T 1006-1998 锯齿剥绒机 肋条

Ribs for saw delinter

GH/T 1007-1998 棉花加工机械 齿条

Gear rock of cotton processing machines

GH/T 1008-1998 籽棉重杂物分离器

Heavy foreign matter separator of seed cotton

GH/T 1005-1998 锯齿轧花机、锯齿剥绒机 锯片

Saw for saw gin and saw delinter

GH/T 1002-1998 棉花加工机械产品型号编制方法

Specification for model of cotton processing machines

GH/T 1003-1998 MFCZ-400斩齿机

MFCZ-400 saw-tooth cutting machine

SL/T 202-1997 往复式水下割草机

本标准规定了往复式水下割草机的型式与基本参数、技术要求、抽样检验、试验方法、标志、包装、运输、贮存。 本标准适用于以船为载体，在水下进行连续割草作业的往复式水下割草机。

Reciprocating Submarine Mower

ISO 11448:1997 撕碎机和风凿机 定义、安全要求和实验程序

This International Standard presents definitions of terms and specifies safety requirements and test procedures applicable to hand-fed powered shredders and chippers, including those which have vacuum assisted collection and are used in a stationary position and are designed primarily for use with organic material at and around the home. This International Standard does not apply to shredders and chippers with feed openings greater than 400 mm × 400 mm measured at the relevant safety distance to the cutting means. This International Standard does not specify requirements for units powered by an external power source or for powered discharge units intended to broadcast material or load vehicles. Mechanically powered feed intake machines or attachments are excluded from this International Standard, as are machines for which the cutting means is either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J. The electrical aspects of electrically powered shredder/grinders and shredder/baggers having a voltage exceeding 42 V d.c. or mains connected are not covered by this International Standard.

Powered shredders and chippers - Definitions, safety requirements and test procedures

TIS 1385-1996 稻谷烘干机

Paddy dryers

BS ISO 11787:1995 农业和林业机械 管理计算机和过程计算机之间的数据交换 数据交换语法

Machinery for agriculture and forestry. Data interchange between management computer and process computers. Data interchange syntax

YY 0219-1995 槽式混合机

Trough mixer

YY 0222-1995 荸荠式包衣机

Water chestnut coating machine