65.160 烟草、烟草制品和烟草工业设备 标准查询与下载

BS EN 17375:2020 电子烟和电子液体 参考电子烟油

What is BS EN 17375 about?   BS EN 17375 is a technical standard that serves as guidance on reference e-liquids for electronic cigarettes.    EN 17375  provides guidance on the composition and formulations of e-liquids for the safety of end-users.   BS EN 17375 specifies reference e-liquids to be used to test emissions generated by electronic cigarettes. BS EN 17375 applies to the reference e-liquids to be used when an electronic cigarette is sold empty, without an e-liquid, and where the product information or instructions for use are not specific in terms of the compositional characteristics of the e-liquid to be used with the device.  

Electronic cigarettes and e-liquids. Reference e-liquids

BS ISO 23904:2020 香烟 使用 HPLC-FLD 测定强烈吸烟状态下卷烟主流烟气中选定的酚类化合物

What is ISO 23904 about?   ISO 23904 is a standard that covers HPLC-FLD method for cigarette mainstream smoke with an intense smoking regime which enables accurate determination of phenolic compounds in cigarettes and regulate their content.   ISO 23904 specifies a method for the quantification of selected phenolic compounds by high performance liquid chromatography with fluorescence detection (HPLC-FLD) using ISO 20778 smoking parameters. The selected phenolic compounds are: hydroquinone, resorcinol, catechol, phenol, p-Cresol, m-Cresol and o-Cresol.   ISO 23904 method is applicable to cigarettes with total particulate matter (TPM) yields between 20 mg/cigarette and 45 mg/cigarette.

Cigarettes. Determination of selected phenolic compounds in cigarette mainstream smoke with an intense smoking regime using HPLC-FLD

BS ISO 23920:2020 香烟 使用离子色谱法测定强烈吸烟状态下卷烟主流烟气中的氨

What is ISO 23920 about?   ISO 23920 is a standard that covers the ion chromatography test method for cigarette mainstream smoke with an intense smoking regime that enables accurate determination of ammonia in cigarettes and regulate its content.   ISO 23920 specifies a method for the quantification of ammonia by ion chromatography in mainstream smoke using ISO 20778 smoking parameters.   ISO 23920 specifies is applicable to an ammonia yield of about 10 μg/cigarette to 40 μg/cigarette.   Note: ISO 23920 does not apply to -  Determination of ammonia in dark-air cured cigarettes  Who is ISO 23920 for?   ISO 23920 on determination of ammonia in cigarettes is applies to:

Cigarettes. Determination of ammonia in cigarette mainstream smoke with an intense smoking regime using ion chromatography

BS ISO 23905:2020 香烟 使用 HPLC-FLD 测定卷烟主流烟气中选定的酚类化合物

What is ISO 23905 about?   ISO 23905 is a standard that covers the HPLC-FLD method for cigarette mainstream smoke which enables accurate determination of phenolic compounds in cigarettes and regulate their content.   ISO 23905 specifies a method for the quantification of selected phenolic compounds by high-performance liquid chromatography with fluorescence detection (HPLC-FLD) using ISO 3308 smoking parameters. The selected phenolic compounds are hydroquinone, resorcinol, catechol, phenol, p-Cresol, m-Cresol and o-Cresol.   ISO 23905 method is applicable to cigarettes with total particulate matter (TPM) yields between 1 mg/cigarette and 16 mg/cigarette.  

Cigarettes. Determination of selected phenolic compounds in cigarette mainstream smoke using HPLC-FLD

BS ISO 22980:2020 烟草 烟碱总生物碱含量的测定 使用 KSCN/DCIC 的连续流分析方法

What is ISO 22980 about?   ISO 22980 is an international standard that covers continuous flow analysis testing methods using KSCN/DCIC in tobacco products that facilitates determination of purity of nicotine and analysis of nicotine content to regulate its presence according to regulatory rules.   ISO 22980 specifies a method for the determination of the content of total alkaloids as nicotine in tobacco by continuous-flow analysis.   ISO 22980 method is applicable to leaf samples, stems, reconstituted tobacco sheet materials and tobacco blends.   ISO 22980 method eliminates the use of the potassium cyanide (KCN) by employing pota...

Tobacco. Determination of the content of total alkaloids as nicotine. Continuous-flow analysis method using KSCN/DCIC

DB43/T 1811-2020 烟草专用生物发酵菜籽饼肥通用技术要求

General technical requirements for bio-fermented rapeseed cake fertilizer for tobacco

DB43/T 1810-2020 烤烟实物标样制作规程

Procedures for making physical standard samples of flue-cured tobacco

DB43/T 1809-2020 烟农专业合作社会计核算规范

Standards for Accounting and Accounting of Tobacco Farmers Professional Cooperative Society

ISO 23904:2020 卷烟用高效液相色谱法测定浓烟状态下卷烟主流烟气中的酚类化合物

This document specifies a method for the quantification of selected phenolic compounds by high performance liquid chromatography with fluorescence detection (HPLC-FLD) using ISO 20778 smoking parameters. The selected phenolic compounds are: hydroquinone, resorcinol, catechol, phenol, p-Cresol, m-Cresol and o-Cresol. This method is applicable to cigarettes with total particulate matter (TPM) yields between 20 mg/ cigarette and 45 mg/cigarette.

Cigarettes — Determination of selected phenolic compounds in cigarette mainstream smoke with an intense smoking regime using HPLC-FLD

ISO 23920:2020 卷烟.用离子色谱法测定浓烟环境下卷烟主流烟气中氨的含量

This document specifies a method for the quantification of ammonia by ion chromatography in mainstream smoke using ISO 20778 smoking parameters. This method is applicable to an ammonia yield of about 10 µg/cigarette to 40 µg/cigarette. It is not applicable for the determination of ammonia in dark-air cured cigarettes.

Cigarettes — Determination of ammonia in cigarette mainstream smoke with an intense smoking regime using ion chromatography

ISO 23905:2020 卷烟.用HPLC-FLD测定卷烟主流烟气中选定的酚类化合物

This document specifies a method for the quantification of selected phenolic compounds by high performance liquid chromatography with fluorescence detection (HPLC-FLD) using ISO 3308 smoking parameters. The selected phenolic compounds are: hydroquinone, resorcinol, catechol, phenol, p-Cresol, m-Cresol and o-Cresol. This method is applicable to cigarettes with total particulate matter (TPM) yields between 1 mg/ cigarette and 16 mg/cigarette.

Cigarettes — Determination of selected phenolic compounds in cigarette mainstream smoke using HPLC-FLD

T/ZZB 1617-2020 卷烟纸

本标准规定了卷烟纸的术语和定义、分类、基本要求、技术要求、试验方法、检验规则，标志、包装、运输、贮存及质量承诺。 本标准适用于机制卷烟纸。

Cigarette paper

ISO 22980:2020 烟草尼古丁总生物碱含量的测定连续流动分析法

This document specifies a method for the determination of the content of total alkaloids as nicotine in tobacco by continuous-flow analysis. This method is applicable to leaf samples, stems, reconstituted tobacco sheet materials and tobacco blends.

Tobacco — Determination of the content of total alkaloids as nicotine — Continuous-flow analysis method using KSCN/DCIC

DB42/T 1549-2020 雪茄烟叶等级质量标准

Cigar Tobacco Grade Quality Standard

ASTM E2187-20a 用于测量香烟点火强度的标准测试方法

1.1 This fire-test-response standard provides a standard measure of the capability of a cigarette, positioned on one of four standard substrates, to generate sufficient heat to continue burning and thus potentially cause ignition of bedding or upholstered furniture. 1.2 This method has value as a predictor of the relative propensity of a cigarette to ignite upholstered furnishings. 1.3 This method is applicable to cigarettes that burn along the length of a tobacco column. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring the Ignition Strength of Cigarettes

BS ISO 23919:2020 香烟 离子色谱法测定卷烟主流烟气中的氨

What is ISO 23919 about?   ISO 23919 is a standard that covers the ion chromatography test method for cigarettes that enables accurate determination of ammonia in cigarettes and regulate its content.   ISO 23919 specifies a method for the quantification of ammonia by ion chromatography in mainstream smoke using ISO 3308 smoking parameters.   ISO 23919 is applicable to cigarettes with ammonia yields between 1 μg/cigarette and 30 μg/cigarette.   Note: ISO 23919 does not apply to - 

Cigarettes. Determination of ammonia in cigarette mainstream smoke using ion chromatography

ISO 23919:2020 卷烟.用离子色谱法测定卷烟主流烟气中的氨

This document specifies a method for the quantification of ammonia by ion chromatography in mainstream smoke using ISO 3308 smoking parameters. This method is applicable to cigarettes with ammonia yields between 1 µg/cigarette and 30 µg/ cigarette. It is not applicable for the determination of ammonia in dark-air cured cigarettes.

Cigarettes — Determination of ammonia in cigarette mainstream smoke using ion chromatography

ASTM E2187-20 用于测量香烟点火强度的标准测试方法

Standard Test Method for Measuring the Ignition Strength of Cigarettes

ISO 13276:2020 烟草和烟草制品 - 烟碱纯度的测定 - 使用钨硅酸的重量法

This document specifies a method for the gravimetric determination of the purity of nicotine using tungstosilicic acid. The method is applicable to pure nicotine or nicotine salts used to calibrate analytical methods for the determination of nicotine in the field of tobacco, tobacco products and smoke analysis.

Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid

ISO 4874:2020 烟草 - 原料批次的抽样 - 一般原则

This document specifies the general principles to be applied when sampling batches of raw tobacco in order to assess either — the mean value of one or more of its characteristics, or — the heterogeneity of one or more of its characteristics. Manufactured tobacco products, including products intended for sale or distribution, are specifically not included in the scope of this document. This document is applicable to the sampling of batches of raw tobacco of the following types: a) leaf tobacco: 1) flue cured; 2) air cured; 3) sun cured; 4) fire cured; b) pretreated raw tobacco: 1) which has undergone fermentation (in packages not intended for retail or wholesale sales or distribution, in bulk, in chambers); 2) which has been partially or completely stemmed; 3) which is in the form of stems; 4) which is in the form of waste and remnants; 5) which has been reconstituted in the form of strips.

Tobacco — Sampling of batches of raw material — General principles