65.160 烟草、烟草制品和烟草工业设备 标准查询与下载

DB5206/T 48-2018 “梵净山”优质烤烟基地建设标准

"Fanjingshan" high-quality flue-cured tobacco base construction standards

DB5206/T 32-2018 “梵净山”烤烟综合标准体系

"Fanjingshan" Flue-cured Tobacco Comprehensive Standard System

DB5206/T 40-2018 烟草农业科研成果经济效益评估方法

Evaluation Method of Economic Benefit of Tobacco Agricultural Scientific Research Achievements

DB5206/T 60-2018 烤烟田间管理技术规程

Flue-cured Tobacco Field Management Technical Regulations

DB5206/T 38-2018 烟草农药安全使用规则

Tobacco Pesticide Safe Use Rules

DB5206/T 76-2018 烤烟生产灾害预防与减灾办法

Disaster Prevention and Mitigation Measures in Flue-cured Tobacco Production

BS ISO 21330:2018 香烟 卷烟主流烟气中选定挥发性有机化合物的测定 使用 GC/MS 的方法

What is this standard about? This document specifies a method for the quantification of selected volatile organic compounds (VOCs: 1,3-butadiene, isoprene, acrylonitrile, benzene and toluene) by GC-MS in mainstream cigarette smoke using ISO 3308 smoking parameters. This method is applicable to cigarettes with nicotine-free dry particulate matter (NFDPM) yields between 1 mg/cigarette and 15 mg/cigarette.

Cigarettes. Determination of selected volatile organic compounds in the mainstream smoke of cigarettes. Method using GC/MS

BS ISO 21160:2018 香烟 卷烟主流烟气中选定羰基化合物的测定 使用高效液相色谱法

What is this standard about? This document specifies a method for the determination of selected carbonyls (formaldehyde, acetaldehyde, acetone, acrolein, propionaldehyde, crotonaldehyde, 2-butanone and n-butyraldehyde) as their 2,4-dinitrophenylhydrazones in mainstream smoke using reversed phase HPLC-UV/DAD. This method is applicable to cigarettes with nicotine-free dry particulate matter (NFDPM) yields between 1 mg/cigarette and 15 mg/cigarette using reversed phase HPLC-UV/DAD.

Cigarettes. Determination of selected carbonyls in the mainstream smoke of cigarettes. Method using high performance liquid chromatography

DB36/T 731-2018 初烤烟的保管和分级技术规范

Technical specification for storage and grading of primary flue-cured tobacco

DB36/T 729-2018 烟草病虫害综合防治技术规程

Technical Regulations for Integrated Control of Tobacco Pests

DB36/T 730-2018 烟田杂草控制技术规程

Tobacco Field Weed Control Technical Regulations

T/ZZB 0761-2018 单面光烟用接装纸原纸

本标准规定了单面光烟用接装纸原纸术语和定义、基本要求、技术要求、试验方法、检验规则、包装、标志、运输和贮存及质量承诺。 本标准适用于白色单面光烟用接装纸原纸。

Tipping base paper of machine glazing for cigarette

ISO 21160:2018 香烟 - 卷烟主流烟中选择的羰基的测定 - 使用高效液相色谱法

Cigarettes — Determination of selected carbonyls in the mainstream smoke of cigarettes — Method using high performance liquid chromatography

ISO 21330:2018 香烟 - 主流烟雾中选定的挥发性有机化合物的测定 - 使用GC-MS的方法

This document specifies a method for the quantification of selected volatile organic compounds (VOCs: 1,3-butadiene, isoprene, acrylonitrile, benzene and toluene) by GC-MS in mainstream cigarette smoke using ISO 3308 smoking parameters. This method is applicable to cigarettes with nicotine-free dry particulate matter (NFDPM) yields between 1 mg/cigarette and 15 mg/cigarette.

Cigarettes — Determination of selected volatile organic compounds in the mainstream smoke of cigarettes — Method using GC/MS

BS ISO 20778:2018 香烟 常规分析吸烟机 强烈吸烟习惯的定义和标准条件

1   Scope This document: — defines smoking parameters and specifies the conditions to be provided for the routine analytical machine smoking of cigarettes under specified intense conditions; — specifies the requirements for a routine analytical smoking machine conforming with these conditions; — specifies additional test methods for machine verification. Annex A gives examples of designs of smoking machine enclosures. NOTE The type of analytical smoking machine used could impact the mass of total particulate matter collected on the smoke trap . This might be due to either incomplete collection or evaporation of water and other volatile compounds from the smoke trap .

Cigarettes. Routine analytical cigarette smoking machine. Definitions and standard conditions with an intense smoking regime

BS ISO 7210:2018 常规分析吸烟机 机器验证的附加测试方法

Routine analytical cigarette-smoking machine. Additional test methods for machine verification

ISO 20779:2018 香烟 - 使用具有强烈吸烟制度的常规分析吸烟机生成和收集总颗粒物

This document specifies a method for the generation and collection of total particulate matter (TPM) present in the smoke from cigarettes using a routine analytical smoking machine with an intense smoking regime. It is not applicable to the determination of water or nicotine-free dry particulate matter when using the extraction procedure specified in ISO 4387:2000, 7.9.1 or the subsequent measurement of water specified in ISO 10362-1 or ISO 10362-2. NOTE The type of analytical smoking machine used could impact the mass of TPM collected on the smoke trap. This might be due to either incomplete collection or evaporation of water and other volatile compounds from the smoke trap.

Cigarettes — Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime

T/GZPPIA 01-2018 聚苯乙烯浮盘

根据我们收集到的国内外相关标准及下游产品标准的技术要求，结合目前用户对生产厂家的要求，确定的技术指标项目如下： 1　外观 2　规格 3　尺寸偏差 4　密度（kg/m3） 5　重量偏差 6　尺寸稳定性 7　浮盘10%压缩力

Polystyrene buoyancy

ISO 20778:2018 香烟.常规分析吸烟机.具有强烈吸烟状态的定义和标准条件

This document: — defines smoking parameters and specifies the conditions to be provided for the routine analytical machine smoking of cigarettes under specified intense conditions; — specifies the requirements for a routine analytical smoking machine conforming with these conditions; — specifies additional test methods for machine verification. Annex A gives examples of designs of smoking machine enclosures. NOTE The type of analytical smoking machine used could impact the mass of total particulate matter collected on the smoke trap. This might be due to either incomplete collection or evaporation of water and other volatile compounds from the smoke trap.

Cigarettes - Routine analytical cigarette smoking machine - Definitions and standard conditions with an intense smoking regime

ISO 7210:2018 卷烟的常规分析 吸烟机 补充试验方法

This document specifies additional test methods for routine analytical cigarette-smoking machines intended to check the conformity of these machines with ISO 3308 and ISO 20778. It only establishes additional test methods for smoking machines and does not deal with actual smoking, which is described in other International Standards. It is composed of four sections relating to — the determination of pressure drop (Clause 4); — the determination of significant puff profile parameters (Clause 5); — the verification of restricted smoking (Clause 6); — the description of the soap film bubble flowmeter for the determination of the puff volume (Clause 7). NOTE There are more possibilities for determining the aforementioned parameters. Systems giving the same results and accuracies can be used. The certificate of conformity with this standard can be obtained from the machine manufacturer.

Routine analytical cigarette-smoking machine - Additional test methods for machine verification