71.040.10 化学实验室、实验室设备 标准查询与下载

OENORM EN 16589-1-2021 实验室局部排气装置 第1部分：铰接式抽气臂

Laboratory local exhaust devices - Part 1: Articulated extraction arm

LST EN IEC 61010-2-091/A11:2021 测量、控制和实验室用电气设备的安全要求 第 2-091 部分：柜式 X 射线系统的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems

LST EN IEC 61010-2-091:2021 测量、控制和实验室用电气设备的安全要求 第 2-091 部分：柜式 X 射线系统的特殊要求（IEC 61010-2-091:2019）

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems (IEC 61010-2-091:2019)

GSO IWA 23:2021 微流体装置的互操作性 间距尺寸和初始装置分类指南

IWA 23:2016 is a consensus document developed by the workshop participants and observers in response to the need for standardization and harmonization of pitch spacing dimension, initial device classification and terminology of relevance. IWA 23:2016 will serve as a guideline and is applicable to various interested parties and stakeholders in the microfluidics community. IWA 23:2016: - specifies geometrical standards in relation to pitch connector dimensions of microfluidic devices, - specifies an initial device classification rules, and - defines terms of relevance.

Interoperability of microfluidic devices — Guidelines for pitch spacing dimensions and initial device classification

LST EN IEC 61010-2-034:2021 测量、控制和实验室用电气设备的安全要求 第 2-034 部分：绝缘电阻测量设备和电气强度测试设备的特殊要求（IEC 61010-2-034:2017）

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength (IEC 61010-2-034:2017)

LST EN IEC 61010-2-034/A11:2021 测量、控制和实验室用电气设备的安全要求 第 2-034 部分：绝缘电阻测量设备和电气强度测试设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength

LST EN IEC 61010-2-030:2021 测量、控制和实验室用电气设备的安全要求 第 2-030 部分：具有测试或测量电路的设备的特殊要求（IEC 61010-2-030:2017）

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits (IEC 61010-2-030:2017)

LST EN IEC 61010-2-030/A11:2021 测量、控制和实验室用电气设备的安全要求 第 2-030 部分：具有测试或测量电路的设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits

ASTM D8244-21a 支持大麻/大麻工业的分析实验室操作的标准指南

1.1 This guide provides recommendations for a laboratory licensed or otherwise designated to provide analytical support within the cannabis/hemp industry. Within the scope of this guide, the term cannabis/hemp is inclusive of hemp plants and derived products. This guide presents best laboratory practices, recommended certifications, recommended types of analyses typically required in the cannabis/hemp industry, and recommended quality functions associated with laboratories supporting the cannabis/hemp industry. 1.2 These recommendations establish a basis for oversight for the analytical testing of cannabis/hemp products. This guide was developed as a complement to existing best practices and, in supporting conformance to current good manufacturing practices (GMP), which are typically required regulatory practices relevant to the cannabis/hemp industries; these recommendations focus on the personnel, security, sample handling and disposal, quality support, data management and reporting activities. 1.3 This guide generally describes the properties of cannabis/hemp, and cannabis/hemp/cannabis-hemp-derived products to be analyzed. 1.4 No recommendations found within this guide shall preclude observance of regulations from authorities having regional jurisdiction, which may be more restrictive or have different requirements. 1.5 This guide applies to all cannabis/hemp containing products commercially manufactured and distributed for consumer use. 1.6 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.7 This guide does not purport to address all laboratory safety concerns associated with its use. It is the responsibility of the user of this guide to establish appropriate safety and health practices, maintain all safety data sheets (SDS), and document safe practices through work instructions and standard operating procedures (SOPs). 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp Industry

prEN 16589-1-2021 实验室局部排气装置 第1部分：铰接式抽气臂

Laboratory local exhaust devices - Part 1: Articulated extraction arm

DB23/T 2825-2021 普通高等院校实验室危险化学品安全管理规范

Standards for Safety Management of Hazardous Chemicals in Laboratories of Ordinary Colleges and Universities

T/CSEE 0096-2019 化学法氨逃逸在线分析监测装置

本标准规定了化学法氨逃逸在线分析监测装置的原理、系统组成结构、功能要求、技术要求、检测方法、标志、包装、运输、贮存。

On-line analysis and monitoring device for ammonia escape by chemical method

DIN EN 15154 Beiblatt 1:2021 应急安全淋浴. 补充件1: 自动释放身体淋浴

This document is a supplement to DIN EN 15154 and includes information on automatic release for emergency safety body showers which are installed on industrial and logistic sites. Emergency safety body showers using fluid other than water are not considered in this document.

Emergency safety showers - Supplement 1: Automatic release for body showers

BS EN 13150:2020 教育机构实验室的工作台 尺寸、安全和耐久性要求和测试方法

Workbenches for laboratories in educational institutions. Dimensions, safety and durability requirements and test methods

T/CIMA 0016-2020 饮用水中铜绿假单胞菌检测系统

本标准规定了饮用水中铜绿假单胞菌检测系统的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于基于氧化还原指示剂显色法的原理，使用试剂盒（包）对饮用水中铜绿假单胞菌进行检测的系统（以下简称检测系统）。 本标准中的饮用水仅包括包装饮用水和饮用天然矿泉水。

Detection system of Pseudomonas aeruginosa in drinking water

T/CIMA 0023-2020 车载式电感耦合等离子体四极杆质谱仪技术要求

本标准规定了车载式电感耦合等离子体四极杆质谱仪术语和定义、要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于车载式电感耦合等离子体四极杆质谱仪。

Technical requirements for vehicle-mounted inductively coupled plasma quadrupole mass spectrometer

T/CIMA 0022-2020 车载台式气相色谱-质谱联用仪技术要求

本标准规定了车载台式气相色谱-质谱联用仪的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于使用质量分析器为离子阱或四极杆的对挥发性有机物和半挥发性有机物进行定性、定量分析的车载台式气相色谱-质谱联用仪。

Technical requirements for vehicle-mounted gas chromatography -mass spectrometer

T/CIMA 0017-2020 粮食农残速测试剂盒

本标准规定了粮食农残速测试剂盒术语和定义、要求、试验方法、标识、标签、使用说明书、包装、运输和贮存。 本标准适用于大米、大豆、小麦等粮食中有机磷和氨基甲酸酯类农残进行快速检测的试剂盒（以下简称“试剂盒”）。

Rapid determination kits for pesticide residues in grains

ASTM D8244-20 支持大麻工业的分析实验室操作标准指南

Standard Guide for Analytical Laboratory Operations Supporting the Cannabis Industry

T/LZZLXH 036-2020 实验室危险化学品安全管理规范

5　设施设备要求 5.1　有可燃气体使用、产生的实验室不应设吊顶。 5.2　实验工作区和办公休息区应隔开设置。 5.3　实验室的门应向疏散方向开启且采用平开门，不应采用推拉门、卷帘门。 5.4　实验室建筑设施及其他有关安全、防护、疏散的要求应符合JGJ 91和GB 50016的规定。 5.5　危险化学品储存柜设置应避免阳光直晒及靠近暖气等热源，保持通风良好，不宜贴邻实验台设置， 也不应放置于地下室。 5.6　在使用气体的实验室应设通风系统，宜配备氧气含量测报仪。 5.7　在散发可燃气体、可燃蒸气的实验室应配备防爆型电气设备。应设可燃气体检（探）测器且与风机联锁。 5.8　使用气体应配置气瓶柜或气瓶防倒链、防倒栏栅等设备。气瓶设置在室外，应设在避雨通风的安全区域。实验室内使用后的氧化性废气、可燃性废气、毒性废气、腐蚀性废气应分别引至合适的处理设备处理。 5.9　具有化学灼伤危险的实验室应按照HG 20571的要求设计洗眼器、淋洗器等安全防护措施。 5.10　应根据GB 17914、GB 17915和GB 17916中规定的易燃易爆性化学品、腐蚀性化学品和毒害性化学品的灭火方法，针对实验室使用的化学品的危险性质，在明显和便于取用的位置定位设置以下消防器材： 1）灭火器； 2) 灭火毯； 3) 砂箱； 4) 消防铲； 5) 其他必要消防器材。

Specification for safety management of hazardous chemicals in laboratory