71.040.20 实验室器皿和有关仪器 标准查询与下载

ASTM E123-02(2024) 蒸馏法测定水的仪器标准规范

Standard Specification for Apparatus for Determination of Water by Distillation

ASTM E237-02(2024) 实验室玻璃微容量容器（容量瓶和离心管）的标准规范

Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)

ASTM E438-92(2024) 实验室仪器用玻璃的标准规范

Standard Specification for Glasses in Laboratory Apparatus

BS ISO 4802-2:2023 玻璃器皿 玻璃容器内表面的耐水解性 火焰光谱法测定和分类

Glassware. Hydrolytic resistance of the interior surfaces of glass containers - Determination by flame spectrometry and classification

BS ISO 4802-1:2023 玻璃器皿 玻璃容器内表面的耐水解性 滴定法测定和分类

Glassware — Hydrolytic resistance of the interior surfaces of glass containers - Determination by titration method and classification

ASTM E617-23 实验室重量和精密质量标准的标准规范

Standard Specification for Laboratory Weights and Precision Mass Standards

T/CASME 535-2023 细胞培养微孔板

本文件规定了细胞培养微孔板的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。

Cell culture microtiter plate

BS EN ISO 4803:2023 实验室玻璃器皿 硼硅酸盐玻璃管

1   Scope This document specifies requirements for borosilicate 3,3 glass tubing according to ISO 3585 for laboratory apparatus in an outer diameter range from 4 mm to 300 mm. This document defines dimensions, material, denomination, designation, requirements and inspection methods.

Laboratory glassware. Borosilicate glass tubing

EN ISO 13132:2023 实验室玻璃器皿 培养皿 (ISO 13132:2023)

This document specifies requirements and tests for glass Petri dishes intended for general laboratory purposes and microbiological work.

Laboratory glassware - Petri dishes (ISO 13132:2023)

ISO 13132:2023 实验室玻璃器皿.培养皿

This document specifies requirements and tests for glass Petri dishes intended for general laboratory purposes and microbiological work.

Laboratory glassware — Petri dishes

BS EN ISO 22916:2022 微流体装置 尺寸、连接和初始设备分类的互操作性要求

1   Scope This document specifies requirements for the seamless integration with other microfluidic components and systems to facilitate the process of designing new microfluidic devices (e.g. microfluidic chips, sensors, actuators, connectors). This document is applicable to devices in the field of “microfluidics” needing microfluidic interconnections.

Microfluidic devices. Interoperability requirements for dimensions, connections and initial device classification

EN ISO 4803:2023 实验室玻璃器皿 硼硅酸盐玻璃管

This document specifies requirements for borosilicate 3,3 glass tubing according to ISO 3585 for laboratory apparatus in an outer diameter range from 4 mm to 300 mm. This document defines dimensions, material, denomination, designation, requirements and inspection methods.

Laboratory glassware - Borosilicate glass tubing (ISO 4803:2021)

23/30448266 DC BS ISO 4802-1 玻璃器皿 玻璃容器内表面的耐水解性 第1部分：滴定法测定和分类

BS ISO 4802-1 Glassware. Hydrolytic resistance of the interior surfaces of glass containers - Part 1. Determination by titration method and classification

23/30448269 DC BS ISO 4802-2 玻璃器皿 玻璃容器内表面的耐水解性第2部分：火焰光谱法测定和分类

BS ISO 4802-2. Glassware. Hydrolytic resistance of the interior surfaces of glass containers - Part 2. Determination by flame spectrometry and classification

ASTM E1154-23 活塞式或柱塞式容积仪和操作员资格鉴定标准规范

1.1 This specification covers requirements, operating conditions, and test procedures for piston or plunger operated volumetric apparatus (POVA), as well as requirements for pipette operator training and qualification. 1.2 This specification is applicable to all types of POVA. The following precautionary caveat pertains only to the test procedure portion, Annex A1 and Annex A2, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Piston or Plunger Operated Volumetric Apparatus and Operator Qualification

EN ISO 22916:2022 微流控器件.尺寸、连接和初始器件分类的互操作性要求

This document specifies requirements for the seamless integration with other microfluidic components and systems to facilitate the process of designing new microfluidic devices (e.g. microfluidic chips, sensors, actuators, connectors). This document is applicable to devices in the field of “microfluidics” needing microfluidic interconnections.

Microfluidic devices - Interoperability requirements for dimensions, connections and initial device classification (ISO 22916:2022)

KS L ISO 4797:2022 实验室玻璃器皿.带锥形研磨接头的沸腾烧瓶

Laboratory glassware — Boiling flasks with conical ground joints

KS L ISO 4797-2022 实验室玻璃器皿.带锥形研磨接头的沸腾烧瓶

Laboratory glassware — Boiling flasks with conical ground joints

T/ZZB 2974-2022 色谱用中硼硅玻璃自动进样瓶

本文件规定了色谱用中硼硅玻璃自动进样瓶的术语和定义、结构、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于由中硼硅玻璃瓶体、开孔塑料瓶盖、硅橡胶/聚四氟乙烯复合垫片组成，容量为 2 mL及以下用于色谱分析的自动进样瓶（以下简称进样瓶）。

Neutral borosilicate glass autosampler vial for chromatography

ASTM E1379-90(2022) 实验室玻璃杜瓦瓶标准规格

1.1 This specification provides standard material and performance requirements for glass Dewar flasks suitable for general laboratory use. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Laboratory Glass Dewar Flask