71.040.20 实验室器皿和有关仪器 标准查询与下载

ASTM E236-66(2022) 护理记录 (CCR) 连贯性的标准规范

1.1 This specification covers apparatus for the microdetermination of methoxyl and ethoxyl groups in organic compounds. NOTE 1—This specification was originally developed by the Committee on Microchemical Apparatus, Division of Analytical Chemistry, American Chemical Society.2 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups

ASTM E1405-98(2022) 实验室玻璃蒸馏烧瓶标准规范

1.1 This specification covers standard dimensional requirements for glass distillation flasks. It includes general purpose flasks and flasks designed for specific tests especially in the petroleum testing area. NOTE 1—For packaging standards, choose among Specifications E920, E1157, and E1133. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Laboratory Glass Distillation Flasks

ASTM E147-61(2022) 描述和规定电感耦合等离子发射光谱议的标准操作规程

1.1 This specification covers digestion and distillation apparatus used for the microdetermination of nitrogen by the Kjeldahl method, and modifications thereof at atmospheric pressure. NOTE 1—This specification is based on those originally developed by the Committee on Microchemical Apparatus, Division of Analytical Chemistry, American Chemical Society.2 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method

ASTM E1379-90(2022) 实验室玻璃杜瓦瓶标准规格

1.1 This specification provides standard material and performance requirements for glass Dewar flasks suitable for general laboratory use. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Laboratory Glass Dewar Flask

ASTM E1378-99(2022) 实验室玻璃多颈蒸馏/沸腾瓶的标准规范

1.1 This specification provides standard dimensional requirements for multiple neck distilling/boiling flasks. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks

ASTM E1406-95(2022) 使用实验室玻璃吸滤瓶的标准规范

1.1 This specification provides standard dimensional requirements for glass filtering flasks suitable for general laboratory use. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Laboratory Glass Filter Flasks

ASTM E1377-99(2022) 实验室玻璃凯氏烧瓶的标准规格

1.1 This specification provides standard dimensional requirements for glass Kjeldahl flasks for nitrogen digestion analysis. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Laboratory Glass Kjeldahl Flasks

ASTM E784-89(2022) 夹具 实用程序 实验室和持有人 滴定管和夹具的标准规范

1.1 This specification covers clamps and clamp holders for use in securing laboratory apparatus to support stands. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp

ISO 23783-3:2022 自动液体处理系统.第3部分:容积性能的测定、规范和报告

This document provides guidance and establishes requirements for collecting and examining volumetric performance data of automated liquid handling systems (ALHS). It specifies how to index and track volumetric performance data and provides descriptive statistics for the evaluation of these data. This document also specifies reporting requirements of ALHS volumetric performance. This document is applicable to all ALHS with complete, installed liquid handling devices, including tips and other essential parts needed for delivering a specified volume, which perform liquid handling tasks without human intervention into labware. NOTE For terminology and general requirements of automated liquid handling systems, see ISO 23783-1. Measurement procedures for the determination of volumetric performance are given in ISO 23783-2.

Automated liquid handling systems — Part 3: Determination, specification and reporting of volumetric performance

ISO 23783-2:2022 自动液体处理系统.第2部分:容积性能测定的测量程序

This document specifies procedures for the determination of volumetric performance of automated liquid handling systems (ALHS), including traceability and estimations of measurement uncertainty of measurement results. This document is applicable to all ALHS with complete, installed liquid handling devices, including tips and other essential parts needed for delivering a specified volume, which perform liquid handling tasks without human intervention into labware. NOTE For terminology and general requirements of automated liquid handling systems, see ISO 23783-1. Determination, specification, and reporting of volumetric performance of automated liquid handling systems is described in ISO 23783-3.

Automated liquid handling systems — Part 2: Measurement procedures for the determination of volumetric performance

ASTM E563-22 冰点浴作为参考温度的制备和使用的标准实施规程

1.1 This practice covers a method of preparing, maintaining, and using a temperature reference bath of a mixture of shaved ice and water, saturated with air at a pressure of 101 325 Pa (1 atm). 1.2 An industrial practice for relating values referenced to the ice point and to the water triple point on the ITS-90 is included. 1.3 Methods to promote uniformity of bath temperature by mechanical stirring or agitation are not described in detail. 1.4 Methods of approximating the ice point, as by thermostatically-controlled refrigeration, are not covered by this practice. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature

ISO 8655-9:2022 活塞式容积仪第9部分:手动精密实验室注射器

This document specifies — metrological requirements, — maximum permissible errors, — requirements for marking and — information to be provided for users, for manually operated precision laboratory syringes made of glass or glass and metal designed to deliver their selected volume (Ex). Manually operated precision laboratory syringes are instruments used for delivering liquids and gases. The barrel is typically made of glass and the plunger and the needle are typically made of metal.

Piston-operated volumetric apparatus — Part 9: Manually operated precision laboratory syringes

ISO 8655-8:2022 活塞式容量仪器第8部分:容量测定用光度基准测量程序

This document specifies the photometric reference measurement procedure for the determination of volume of piston-operated volumetric apparatus (POVA). The procedure is applicable to complete systems comprising the basic apparatus with a maximum nominal volume of 5000 µl and all parts selected for use with the apparatus, disposable or reusable, involved in the measurement by delivery (Ex).

Piston-operated volumetric apparatus — Part 8: Photometric reference measurement procedure for the determination of volume

T/CNIA 0143-2022 半导体材料痕量杂质分析用超纯树脂器皿

本文件规定了半导体材料痕量杂质（ng/kg～μg/kg级别）分析用超纯树脂器皿（以下简称器皿）的技术要求、试验方法、检验规则以及标志、包装、运输、贮存、随行文件及订货单内容。

Ultrapure Resin Vessels for Trace Impurity Analysis of Semiconductor Materials

ISO 22916:2022 微流控器件.尺寸、连接和初始器件分类的互操作性要求

This document specifies requirements for the seamless integration with other microfluidic components and systems to facilitate the process of designing new microfluidic devices (e.g. microfluidic chips, sensors, actuators, connectors). This document is applicable to devices in the field of “microfluidics” needing microfluidic interconnections.

Microfluidic devices — Interoperability requirements for dimensions, connections and initial device classification

ASTM E205-96(2022) 玻璃和氧气燃烧瓶标准规范

1.1 This specification covers the flask and closure, with a fixed platinum sample holder, used in the original oxygen-flask combustion procedures (1, 2).2 NOTE 1—This specification was originally developed by the Committee on Microchemical Apparatus, Division of Analytical Chemistry, American Chemical Society (3). Specifications for types of apparatus that utilize electric (2, 4-7) or infrared (8) ignition are not included because of lack of experience with these. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Glass and Oxygen Combustion Flask

ASTM E1095-99(2022) 普通实验室玻璃漏斗的标准规范

1.1 This specification covers common laboratory or filter funnels, and filling or powder funnels for general laboratory use. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Common Laboratory Glass Funnels

ASTM E124-94(2022) 微量化学分析用称重和干燥设备的标准规范

1.1 This specification covers apparatus used for weighing and drying operations in microchemical laboratory practice. 1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents may be approximate. NOTE 1—This specification was originally developed by the Committee on Microchemical Apparatus, Division of Analytical Chemistry, American Chemical Society.2 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis

ASTM E1133-86(2022) 美国政府采购的成套实验室设备性能试验的标准实施规程

1.1 This practice describes the procedures for testing loaded shipping containers that would be sold to the United States government. The following tests are performed to measure the ability of the shipping container to protect the contents from the environment, shock, and vibration during wartime conditions. This practice is not intended to supplant material specifications or existing pre-shipment test procedures. The suitability of this practice for use with hazardous materials has not been determined. 1.2 The procedures covered in this practice are suitable for all types of laboratory apparatus including reusable and disposable macro and micro products. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements

ASTM E671-98(2022) 退火玻璃实验室设备中最大允许热残余应力的标准规范

1.1 This specification covers a limit for thermal residual stress in reusable annealed glass laboratory apparatus as determined by prescribed photoelastic measurement procedures. 1.2 In broad classification, the laboratory glassware items covered by this specification, but not limited to, are: beakers Imhoff cones bottles, aspirator impingers bottles, dropping jars, battery bottles, gas washing jars, bell bottles, infusion jars, chromatography bottles, milk test jars, cylindrical bottles, reagent joints, ball and socket or standard taper bottles, weighing manometers bulbs, absorption percolators bulbs, leveling pycnometers bulbs, sampling stopcocks burets tubes, centrifuge condensers tubes, chromatography crystallizing dishes tubes, color comparison (turbidity) culture dishes tubes, combustion (ignition) custom apparatus tubes, connecting and adapter cylinders, graduated tubes, digestion and plain tubes, drying desiccators tubes, fermentation extraction tubes tubes, thistle (spray traps) flasks vapor traps fritted ware viscometers funnels watch glasses generators, Kipp grinder, tissue 1.3 This specification recognizes that photoelastic measurements are proportional to the difference of the principal stresses. The limit imposed represents a safety factor to cover a situation in which one of the principal stresses may be larger than the apparent stress. 1.4 This specification applies only to annealed glassware that is intended for sale as such. It excludes glassware that has been thermally tempered, ion-exchanged, or laminated with glass layers of differing expansion. The intent of this specification is to limit the residual stresses for safe consumer use in annealed glass, as it leaves the manufacturer. 1.5 Stresses introduced by thermal expansion differences within the glassware are covered by this specification. Graded and glass-to-metal seals are excluded. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus