共找到 542 条与 化工产品综合 相关的标准,共 37 页
This guide recommends practices and solutions for global supply chain information exchange for substances, preparations, and articles as identified by REACH. The first five annexes of REACH guidance standards serve as a central repository for REACH industry guidance that spans industry sectors and facilitates collaboration across complex global supply chains. Annexes 6-9 provide key EU guidance on information exchange in the supply chain. Section 6 outlines the information that is to be exchanged in the supply chain both in the upstream and downstream directions. Fig. 4 provides a schematic depicting data flow in the upstream and downstream directions. A list of the elements to be included in this exchange is represented in Tables 1-5 that capture the necessary data fields for information exchange. Case studies 1-3 in Annex A1-Annex A3 provide three sample scenarios wherein a customer and supplier complete these five tables to exchange data to address their REACH compliance issues.1.1 This guide will assist companies that manufacture, buy, or sell, or both, substances, preparations, and articles to ensure that supply chains comply with the European Union’s Registration, Evaluation, and Authorization of Chemicals (REACH) regulation. This is accomplished by identifying the specific information elements that must be specified, requested and exchanged in communication between actors in the supply chain. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
Admixtures for concretes and mortars. General specifications
1.1 Scope. 1.1.1 This code shall apply to the manufacture, storage, and display of aerosol products as herein defined. 1.1.2* This code shall not apply to the storage and display of containers whose contents are comprised entirely of LP-Gas products. 1.1.3 This code shall not apply to post-consumer processing of aerosol containers. 1.1.4* This code shall not apply to containers that do not meet the definition of Aerosol Container (see 3.3.2).
Code for the Manufacture and Storage of Aerosol Products
本标准规定了驱蚊花露水的要求、试验方法、检验规则和标志、包装、运输、贮存、使用说明。 本标准适用于以驱蚊有效成分和乙醇、香精等助剂加工制成,对蚊子有驱避作用的液体制剂。
Repellent floral water
Labelling of chemicals based on GHS
Nanotechnologies - Vocabulary - Carbon nano-objects
Presents information for the compilation and completion of an SDS. It defines specifically the general layout of the SDS, the 16 standard headings, the numbering and the sequence of these 16 standard headings and the items necessary to fill in an SDS wit
Safety data sheet for chemical products - Content and order of sections
This Standard specifies the method of classifying the health hazards and environment hazards of chemicals based on GHS. However, "articles(see 2.4)" are excluded from this classification.
Classification of chemicals based on "Globally Harmonized System of Classification and Labelling of Chemicals (GHS)"
Chemicals - Information about safety, health and environment Part 2- Hazard classification system
This part of ABNT NBR 14725 defines the terms used in chemicals hazard classification system, in hazardous chemicals labeling, and safety data sheet for chemical products (FISPQ).
Chemicals - Information about safety, health and environment Part 1: Terminology
This International Standard defines sections, content, and general format of the safety data sheet (SDS) for chemical products. This International Standard does not define a fixed format, nor does it include a blank SDS.
Safety data sheet for chemical products - Content and order of sections
5.1 PCS is one of the very few techniques that are able to deal with the measurement of particle size distribution in the nano-size region. This Guide highlights this light scattering technique, generally applicable in the particle size range from the sub-nm region until the onset of sedimentation in the sample. The PCS technique is usually applied to slurries or suspensions of solid material in a liquid carrier. It is a first principles method (that is, calibration in the standard understanding of this word, is not involved). The measurement is hydrodynamically based and therefore provides size information in the suspending medium (typically water). Thus the hydrodynamic diameter will almost certainly differ from other size diameters isolated by other techniques and users of the PCS technique need to be aware of the distinction of the various descriptors of particle diameter before making comparisons between techniques. Notwithstanding the preceding sentence, the technique is widely applied in industry and academia as both a research and development tool and as a QC method for the characterization of submicron systems. 1.1 This guide deals with the measurement of particle size distribution of suspended particles, which are solely or predominantly sub-100 nm, using the photon correlation (PCS) technique. It does not provide a complete measurement methodology for any specific nanomaterial, but provides a general overview and guide as to the methodology that should be followed for good practice, along with potential pitfalls. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
PCS is one of the very few techniques that are able to deal with the measurement of particle size distribution in the nano-size region. This Guide highlights this light scattering technique, generally applicable in the particle size range from the sub-nm region until the onset of sedimentation in the sample. The PCS technique is usually applied to slurries or suspensions of solid material in a liquid carrier. It is a first principles method (that is, calibration in the standard understanding of this word, is not involved). The measurement is hydrodynamically based and therefore provides size information in the suspending medium (typically water). Thus the hydrodynamic diameter will almost certainly differ from other size diameters isolated by other techniques and users of the PCS technique need to be aware of the distinction of the various descriptors of particle diameter before making comparisons between techniques. Notwithstanding the preceding sentence, the technique is widely applied in industry and academia as both a research and development tool and as a QC method for the characterization of submicron systems.1.1 This guide deals with the measurement of particle size distribution of suspended particles, which are solely or predominantly sub-100 nm, using the photon correlation (PCS) technique. It does not provide a complete measurement methodology for any specific nanomaterial, but provides a general overview and guide as to the methodology that should be followed for good practice, along with potential pitfalls. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
Test method of fibrous activated carbon
Test method of fibrous activated carbon
Determination of aromatic hydrocarbon types in oil spill dispersant-High performance liquid chromatography method with refractive index detection
Determination of aromatic hydrocarbon types in oil spill dispersant-High performance liquid chromatography method with refractive index detection
本标准规定了机床涂装用自然固化型不饱和聚酯腻子(以下简称腻子)的产品性能要求,检验方法以及验收规则。 本标准适用于各种机床产品的底层涂料。
Unsaturated polyester putty for decorating of machine tool
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号