73.100.10 巷道掘进和敷设管道设备 标准查询与下载
共找到 311 条与 巷道掘进和敷设管道设备 相关的标准，共 21 页
本标准规定了矿用气动抓斗（以下简称抓斗）的分类、参数和型号、技术要求、安全性要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿及其他矿山立井开凿用抓岩设备的抓斗。
Pneumatic grab for mine
- ICS
- 73.100.10
- CCS
- D98
- 发布
- 2008-11-19
- 实施
- 2009-01-01
本标准规定了煤矿用混凝土强度检测仪（以下简称检测仪）的型号、基本参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于煤矿用后装拔出法混凝土强度检测仪，其他矿山用混凝土强度检测仪也可参照使用。
Concrete strength testing in strument in coal mine
- ICS
- 73.100.10
- CCS
- D98
- 发布
- 2008-11-19
- 实施
- 2009-01-01
本标准规定了煤矿井下用数字压力表（以下简称压力表）的技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于煤矿井下用数字压力表。
Digital pressure meters in coalmine
- ICS
- 73.100.10
- CCS
- D98
- 发布
- 2008-11-19
- 实施
- 2009-01-01
本标准规定了煤矿用机载锚杆钻机（以下简称钻机）的型号和基本性能参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于煤矿用机载锚杆钻机，并可供其他类型机载式钻机参考。
General specification of machine-mounted bolting machine for coal mine
- ICS
- 73.100.10
- CCS
- D97
- 发布
- 2008-11-19
- 实施
- 2009-01-01
本标准规定了矿用钻孔陀螺测斜仪（以下简称“测斜仪”）的技术要求、试验方法、检验规则以及标志、包装、贮存和运输。 本标准适用于矿井工程、野外地质和水文勘测的各种钻孔陀螺测斜仪。
Diretical gyro-clinometer in coal mine
- ICS
- 73.100.10
- CCS
- D91
- 发布
- 2008-11-19
- 实施
- 2009-01-01
Mining concrete strength tester
- ICS
- 73.100.10
- CCS
- D98
- 发布
- 2008-11-19
- 实施
- 2009-01-01
Digital pressure gauge for underground coal mines
- ICS
- 73.100.10
- CCS
- D98
- 发布
- 2008-11-19
- 实施
- 2009-01-01
Cantilever TBM Part 2: Types and Parameters
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2008-11-19
- 实施
- 2009-01-01
General technical conditions for airborne anchor drilling rigs for coal mines
- ICS
- 73.100.10
- CCS
- D97
- 发布
- 2008-11-19
- 实施
- 2009-01-01
This document lays down requirements for automatic explosion extinguishing systems for roadheadermachines (selective cut heading machines) in roadheader drivages where these systems automatically detect the initial phase of a firedamp explosion which has been initiated by the cutter head of a roadheader machine and extinguish it at the roadhead in such a way that the roadway drivage team is not put at risk.This document does not lay down any requirements for the fighting of fires at the roadhead.The automatic explosion extinguishing system for roadheaders is an autonomous protective system designed in accordance with Directive 94/9/EC.
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
- ICS
- 73.100.10
- CCS
- 发布
- 2008-05-13
- 实施
- 2008-05-13
本标准规定了液压破碎锤的术语、产品分类型式、基本参数、型号编制、技术要求、检验方法、检验规则与标志、包装、运输和贮存。 本标准适用于以液压为动力的手持式液压破碎锤与机载式液压破碎锤。
Hydraulic breaking hammer
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2008-02-01
- 实施
- 2008-07-01
This Part of BS 7861 specifies dimensional, material and performance requirements for rockbolting support system components used in coal mines. Components included are steel rockbolts, glass reinforced plastics (GRP) rockbolts, resins, nuts, conical seats and domed washer plates. This British Standard does not cover the assembly or installation of these components to form a rockbolting support system on site.
Strata reinforcement support system components used in coal mines – Part 1: Specification for rockbolting
- ICS
- 73.100.10
- CCS
- D97
- 发布
- 2007-10-31
- 实施
- 2007-10-31
This document lays down requirements for automatic explosion extinguishing systems for roadheadermachines (selective cut heading machines) in roadheader drivages where these systems automatically detect the initial phase of a firedamp explosion which has been initiated by the cutter head of a roadheader machine and extinguish it at the roadhead in such a way that the roadway drivage team is not put at risk.This document does not lay down any requirements for the fighting of fires at the roadhead.The automatic explosion extinguishing system for roadheaders is an autonomous protective system designed in accordance with Directive 94/9/EC.
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
- ICS
- 73.100.10
- CCS
- 发布
- 2007-10-26
- 实施
- 2007-10-26
本部分规定了悬臂式掘进机（以下简称掘进机）机械部分检修质量的一般要求，各系统中元部件的检修方法和要求。 本部分适用于悬臂式掘进机机械部分检修质量的评定和控制。
Boom type roadheader overhaul criterion. Part 2: Mechanism part
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2007-10-22
- 实施
- 2008-01-01
이 규격은 광산에서 사용하는 광산 지보용 형강의 이음판(이하 이음판이라 한다.) 및 4각
Fish plates for mine support
- ICS
- 73.100.10
- CCS
- D18
- 发布
- 2007-09-17
- 实施
- 2007-09-17
本标准规定了叶片式气动发动机的基本结构参数。 本标准适用于回转式气功工具和气动马达所用单向和双向叶片式气动发动机的设计。
Basic parameter of vane pneumatic motors
- ICS
- 73.100.10
- CCS
- K20;J48
- 发布
- 2007-03-06
- 实施
- 2007-09-01
本标准规定了手持式内燃凿岩机的型式与基本参数、技术要求、检验方法、检验规则及标志、包装、运输和贮存。 本标准适用于手持式内燃凿岩机（以下简称产品）。
Hand-held internal combustion rock drills
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2006-12-31
- 实施
- 2007-07-01
本标准规定了支腿式电动凿岩机的型式与基本参数、技术要求、检验方法、检验规则及标志、包装、运输和贮存。 本标准适用于支腿式电动凿岩机（以下简称产品）。
Leg-support electric rock drills
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2006-12-31
- 实施
- 2007-07-01
