73.100.10 巷道掘进和敷设管道设备 标准查询与下载

JB/T 7169-2004 导轨式液压凿岩机

本标准规定了导轨式液压凿岩机的型式与基本参数、技术要求、试验方法与检验规则及标志、包装、运输与贮存。 本标准适用于导轨式液压凿岩机。

Hydraulic drifters

JB/T 7167-2004 凿岩机械与气动工具焊接件通用技术条件

本标准规定了焊接材料和原材料的使用条件、下料、焊接、焊后等方面的要求及检查与验收方法。 本标准适用于由碳素结构钢、低合金结构钢采用手工电弧焊、半自动焊、自动焊、气体保护焊等方法制造的凿岩机械气动工具的焊接件。

General specifications for welding parts of rock drilling machines & pneumatic tools

JB/T 1674-2004 气腿式凿岩机

本标准规定了气腿式凿岩机的型式与基本参数、技术要求、试验方法和检验规则及标志、包装、运输与贮存。 本标准适用于以压缩空气为动力的气腿式凿岩机。

Air-leg rock drills

JB/T 7162-2004 凿岩机械与气动工具结构钢熔模铸件通用技术条件

本标准规定了凿岩机械与气动工具结构钢熔模铸件的铸件分类、技术要求、检验和铸件交付。 本标准适用于凿岩机械与气动工具结构钢熔模铸件。

General specifications for construction steel lost casting parts of rock drilling machines & pneumatic tools

JB/T 7163-2004 凿岩机械与气动工具钢质模锻件通用技术条件

本标准规定了凿岩机械与气动工具钢质模锻件的技术要求、精度和检验等级、验收规则和检验方法。 本标准适用于凿岩机械与气动工具采用锻锤、压力机锻制碳素钢和合金钢的热模锻件。

General specifications for steel die forging parts of rock drilling machines & pneumatic tools

JB/T 7164-2004 凿岩机械与气动工具机械加工件通用技术条件

本标准规定了凿岩机械与气动工具机械加工件的通用规则、未注公差尺寸、形状和位置公差、涂层厚度的测量方法。 本标准适用于凿岩机械与气动工具机械加工件。

General specifications for machined parts of rock drilling machines & pneumatic tools

JB/T 7165-2004 凿岩机械与气动工具装配通用技术条件

本标准规定了凿岩机械与气动工具零、部件进行装配时的技术和防锈要求、检验规则以及标志与证明书。 本标准适用于凿岩机械与气动工具产品的装配。

General specifications for assembly of rock drilling machines & pneumatic tools

JB/T 7166-2004 凿岩机械与气动工具冷挤压件通用技术条件

本标准规定了凿岩机械与气动工具冷挤压件的分类、技术要求及检验规则。 本标准适用于400℃以下金属挤压机挤制零件。

General specifications of cool extruding parts for rock drilling machines & pneumatic tools

KS E 2806-2004(2009) 要安装地下铁路

The methods for installating rail in mine

JB/T 5500-2004 地下铲运机

本标准规定了地下铲运机的术语定义、产品分类、技术要求、检验规则、标志、包装、运输和贮存。 本标准适用于地下电动铲运机和地下内燃铲运机。

Underground L.H.D

DIN 21164:2003 打竖井.提升吊桶导向架.安全性要求和试验

The riders for winding kibbles are chiefly used for shaft sinking; they serve for the guiding of shaft conveyances and other loads during shaft hoisting.

Shaft sinking - Riders for winding kibbles - Safety requirements and testing

DIN 21530-1:2003 矿井支护.第1部分:总则

Mine support - Part 1: General

DIN 21530-4:2003 矿井支护.第4部分:试验

The document describes all testings, being required for proving the quality of systems of mine supports and sections of mine supports.#,,#

Mine support - Part 4: Testing

DIN 21530-3:2003 矿井支护.第3部分:要求

The document specifies the requirements of the tolerance and the material of high quality for systems of mine supports and sections of mine supports.

Mine support - Part 3: Requirements

DIN 21530-5:2003 矿井支护.第5部分:矿井支护零部件标记

Mine support - Part 5: Marking of parts of mine support

DIN 21530-2:2003 矿井支护.第2部分:尺寸、名称与符号及静力值

Mine support - Part 2: Dimensions, designation and statical values

GOST R 52042-2003 锚固支架.通用规范

Anchor supports. General specifications

BS EN 1804-2:2001+A1:2010 地下采矿机械.液压矿顶支撑物的安全要求.动力装置支脚和柱塞

This standard specifies the safety requirements for legs and rams when used as specified by the manufacturer or his authorised representative. Examples covered by the standard include legs, support rams and rams with their mechanical extensions, internal valves and safety devices, seals, hydraulic connections (up to the first hose or Type B valve, see Part 3) and their lifting points but excluding protective pipes and gaiters, external valves and hydraulic and electrohydraulic control systems. This standard applies to legs, support rams and rams used at ambient temperatures from –10 °C to 60 °C. This standard identifies and takes account of: ? Possible hazards which may be caused by the operation of legs, support rams and rams; ? Areas and operating conditions which may create such hazards; ? Hazardous situations which may cause injury or may be damaging to health. This standard describes methods for the reduction of these hazards. A list of hazards covered appears in clause 4. This standard is applicable to all legs, support rams and rams placed on the market for the first time and which are manufactured after the date on which this standard was published. This European standard does not establish the additional requirements for: ? Specially corrosive environments; ? Hazards occurring during construction, transportation, decommissioning; ? Earthquake.

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Power set legs and rams

BS EN 1804-1:2001+A1:2010 地下采矿机械.液压矿顶支撑物的安全性要求.支撑装置及一般要求

This standard specifies the safety requirements for support units when used as specified by the manufacturer or his authorised representative. Examples of support units are frame supports, chock supports, shield supports, paired frames and push-pull support systems including the components of advancing and anchoring devices which provide support functions. This part of the standard excludes fixing elements on the conveyor, coal-winning equipment, power set legs and rams, valves, hydraulic and electro-hydraulic control units, lighting and signalling facilities and other ancillary equipment. This standard applies to support units used at temperatures from -10° C to 60° C. This standard also applies to support components and support accessories which are provided if the support unit is fitted with stowing equipment. This standard identifies and takes account of: ? Possible hazards which may be caused by the operation of support units; ? Areas and operating conditions which may create such hazards; ? Hazardous situations which may cause injury or may be damaging to health; This standard describes methods for the reduction of these hazards. A list of hazards covered appears in clause 4. This European standard does not establish the additional requirements for: ? Specially corrosive environments; ? Hazards occurring during construction, transportation, decommissioning; ? Earthquake. This standard is applicable to all support units placed on the market for the first time, which are manufactured after the date on which this standard was published.

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Support units and general requirements

GOST R 50703-2002 压头机,刀头安装在桁架上.一般技术要求和测试方法

Настоящий стандарт распространяется на проходческие комбайны со стреловидным исполнительным органом и гусеничной ходовой частью, предн

Heading machines having cutter heads mounted on booms. General technical requirements and test methods