73.100.10 巷道掘进和敷设管道设备 标准查询与下载

DIN 21500:2001 采矿掘井.设计和尺寸规定

The document applies to the design and dimensioning of load-bearing support structures for new mine shafts which are generally circular in profile and cylindrical in shape and which are to be sunk vertically in competent and non-competent strata. It also applies to existing which are to be reconstructed, reinforced or repaired and which for this purpose have to be provided with preliminary support structures or new shaft linings and fittings.#,,#

Shaft sinking in mining - Design and dimensioning

EN 1804-1:2001 地下采矿机械.水压坑道顶棚支架的安全要求.第1部分:支撑单位和一般要求;包含修改件A1-2010

This standard specifies the safety requirements for support units when used as specified by the manufacturer or his authorised representative. Examples of support units are frame supports; chock supports; shield supports; paired frames and push-pull support systems including the components of advancing and anchoring devices which provide support functions.This part of the standard excludes fixing elements on the conveyor; coal-winning equipment; power set legs and rams; valves; hydraulic and electro-hydraulic control units; lighting and signalling facilities and other ancillary equipment. NOTE Some components are dealt with in other parts of this standard.This standard applies to support units used at temperatures from-10° C to 60° C.This standard also applies to support components and support accessories which are provided if the support unit is fitted with stowing equipment.This standard identifies and takes account of: Possible hazards which may be caused by the operation of support units; Areas and operating conditions which may create such hazards; Hazardous situations which may cause injury or may be damaging to health;This standard describes methods for the reduction of these hazards. A list of hazards covered appears in clause 4.This European Standard does not establish the additional requirements for: Specially corrosive environments; Hazards occurring during construction; transportation; decommissioning; Earthquake.This standard is applicable to all support units placed on the market for the first time; which are manufactured after the date on whichThis standard was published.

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements (Incorporates Amendment A1: 2010)

EN 1804-2:2001 地下采矿机械.水压坑道顶棚支架的安全要求.第2部分:动力调整支架和活塞;包含修改件A1-2010

This standard specifies the safety requirements for legs and rams when used as specified byThe manufacturer or his authorised representative. Examples covered byThe standard include legs, support rams and rams withTheir mechanical extensions, internal valves and safety devices, seals, hydraulic connections (up toThe first hose or Type B valve, see Part 3) andTheir lifting points but excluding protective pipes and gaiters, external valves and hydraulic and electrohydraulic control systems. NOTE Some components are dealt with in other parts of this standard.This standard applies to legs, support rams and rams used at ambient temperatures from-10 ℃ to 60 ℃.This standard identifies and takes account of:Possible hazards which may be caused byThe operation of legs, support rams and rams; Areas and operating conditions which may create such hazards; Hazardous situations which may cause injury or may be damaging to health.This standard describes methods forThe reduction of these hazards. A list of hazards covered appears in clause 4.This standard is applicable to all legs, support rams and rams placed onThe market forThe first time and which are manufactured afterThe date on whichThis standard was published.This European Standard does not establishThe additional requirements for:Specially corrosive environments; Hazards occurring during construction, transportation, decommissioning; Earthquake.

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams (Incorporates Amendment A1: 2010)

GOST R 51748-2001 金属框架屈服支架.拱形支架.通用规范

Настоящий стандарт распространяется на металлические податливые рамные арочные крепи, применяемые для крепления подготовительных и кап

Metal frame yield supports. Arch support. General specifications

JB/T 5127-2000 矿用隔爆电动岩石钻

　　本标准规定了矿用隔爆电动岩石钻的型式与基本参数、技术要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于矿用隔爆电动岩石钻。

Ore-used flameproof electrical rotary rock drills

JB/T 5126-2000 起动用叶片式气动马达

　　本标准规定了起动用叶片式气动马达的基本参数、技术要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于起动大功率柴油机用的叶片式气动马达。

Vane air motors for starting

GOST R 51669-2000 基坑液压支柱.测试方法

Настоящий стандарт распространяется на призабойные гидравлические стойки внешнего и внутреннего питания, предназначенные для крепления

Pit hydraulic props. Test methods

JB/T 3906-1999 凿岩机械与气动工具.镁合金铸件通用技术条件

　　本标准规定了凿岩机械与气动工具镁合金铸件分类，化学成分，力学性能，铸件尺寸，表面质量，内部质量，缺陷修正和铸件交付等内容。 本标准适用于凿岩机械与气动工具砂型或金属型镁合金铸件。

General specifications of cast magnesium alloys of rock drilling machines and pneumatic tools

JB/T 3576-1999 凿岩机械与气动工具防锈通用技术条件

　　本标准规定了凿岩机械与气动工具产品在设计、制造、使用和维护中的防锈通用技术条件。 　　本标准适用于凿岩机械与气动工具产品及有关制品的防锈。　

General specifications for rust-preventing of rock-drilling machines and pneumatc tools

JB/T 8718-1998 导轨式凿岩机

本标准规定了导轨式凿岩机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以压缩空气为动力的导轨式凿岩机。

Drifters

JB 8684-1998 凿岩机械与气动工具安全要求

JB/T 8684-1998 本标准规定了凿岩机械与气动工具产品在设计、制造、使用和维护中的一般安全要求。 本标准适用于凿岩机械与气动工具产品。

Safety requirements for rock drilling machines and pneumatic tools

GOST 30628-1998 刨煤装置.试验方法

Настоящий стандарт распространяется на установки струговые открытого, скользящего и комбинированного типов

Plough installations. Test methods

MT/T 644-1997 气垛支架

Air stack bracket

BS 7861-2:1997 煤矿用地层支撑系统部件.鸟笼式电缆螺栓连接规范

This Part of BS 7861 specifies dimensional, material and performance requirements for birdcaged cablebolting support system components used in coal mines. This standard does not cover the assembly or installation of these components to form a cablebolting support system on site. NOTE. All references to cablebolts imply the birdcaged type.

Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting

JB 8551-1997 凿岩机械与气动工具 噪声限值

本标准规定了凿岩机械与气动工具产品的噪声限值。 本标准适用于凿岩机械与气动工具产品中凿岩机、矿用隔爆电动岩石钻、气镐、气铲、气动捣固机、气动铆钉机、气钻、气动砂轮机、冲击式气扳机、气动螺丝刀、气动磨光机、气动捆扎拉紧机和气动马达。

Noise Limits of Rock Drilling Machinery and Pneumatic Tools

JB/T 8550-1997 履带式露天钻车

本标准规定了履带式露天钻车的型式，基本参数与尺寸，技术要求，试验方法与检验规则和标志、包装、运输及贮存。 本标准适用于CL10、CL15、CLY20和CLN30型履带式露天钻车。

Tracked Surface Drilling Rig

GOST R 51047-1997 刨煤机与掘进机用刀具.通用规范

Настоящий стандарт распространяется на резцы, применяемые для оснащения исполнительных органов очистных и проходческих комбайнов, экспл

Cutters for shearers and entry-driving machines. General specifications

KS E 3143-1996(2011) 链接栏

RINK BAR

BS 7861-1:1996 煤矿用地层加强支持系统部件.岩石锚栓规范

Specifies dimensions and tests for steel and glass reinforced plastics (GRP) rockbolts and rockbolt assemblies and specifies resin materials and performance.

Strata reinforcement support system components used in coal mines - Specification for rockbolting

JB/T 1590-1996 凿岩机械与气动工具产品型号编制方法

本标准规定了凿岩机械与气动工具产品型号的编制方法。 本标准适用于凿岩机械与气动工具产品型号的编制，不适用于钢丝绳式冲击钻机和牙轮钻机的型号编制。

Modeling method of rock drilling machinery and pneumatic tools