73.100.20 通风、空调和照明设备 标准查询与下载

NF C23-533-2:2006 对沼气敏感的矿井用矿灯.第2部分:性能和其他安全相关的问题

Caplights for use in mines susceptible to firedamp - Part 2 : performance and other safety-related matters.

BS EN 62013-2:2006 对沼气敏感的矿工用头灯.性能和其他相关安全问题

This part of IEC 62013 details those performance and other safety features of caplights, including those with a point of connection for another apparatus, not covered in IEC 62013-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp. When this part of the standard is used as a "stand-alone" document for non-gassy mines, any relevant constructional requirements should be the subject of agreement between the supplier and the user and, where possible, be as described in IEC 62013-1.

Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

DS/EN 14591-1/AC:2006 地下矿井的防爆和防护 防护系统 第1部分：2-bar 防爆通风结构

This document applies to air shutter frames and air doors for ventilation structures which are to remain functional after the passage of explosions with overpressures of up to 2 bar.

Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure

IEC 62013-1:2005 对甲烷敏感的矿用头灯.第1部分:通用要求.爆炸风险的推定和检验

This part of IEC 62013 specifies requirements for the construction and testing of caplights, including caplights with a point of connection for another apparatus, for use in mines susceptible to firedamp (Group I - electrical apparatus for explosive gas atmospheres as defined in IEC 60079-0). It deals only with the risk of the caplight becoming a source of ignition. NOTE 1 The requirements for performance are in IEC 62013-2 1. The requirements of IEC 60079-0 do not apply unless specified. This standard is also applicable to caplights intended for use in mines which have become temporarily endangered by an explosive gas atmosphere, for example in mine rescue operations. NOTE 2 The use in such circumstances is dependent on a user's risk assessment. Caplights complying with this standard are intended for personal use under normal conditions of: Temperature: 0 °C to +40 °C Pressure: 0,8 bar to 1,1 bar NOTE 3 In designing apparatus for operation in conditions other than those given above, this standard may be used as a guide; however, additional testing may be required.

Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion

IEC 62013-2:2005 对甲烷敏感的矿用头灯.第2部分:性能和其他安全相关方面

This part of IEC 62013 details those performance and other safety features of caplights, including those with a point of connection for another apparatus, not covered in IEC 62013-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp. When this part of the standard is used as a "stand-alone" document for non-gassy mines, any relevant constructional requirements should be the subject of agreement between the supplier and the user and, where possible, be as described in IEC 62013-1.

Caplights for use in mines susceptible for firedamp - Part 2: Performance and other safety-related matters

AQ 1011-2005 煤矿在用主通风机系统安全检测检验规范

本标准规定了煤矿在用主通风机系统安全检测检验的条件、要求、方法和技术要求。 本标准适用于全国范围内安装在工作网路上的在用主通风机系统的一个工况点或多个工况点性能参数、故障诊断、振动、噪声、轴承和电动机定子温升、外观质量、证件审查、安全防护及设施、电动机参数的检验。也适用于维修后的煤矿主通风机系统的安全检验。

Safety inspecting-testing specification of main using fan system for coal mine

AQ/T 1013-2005 煤矿在用空气压缩机安全检测检验规范

Specifications for safety inspection and inspection of in-use air compressors in coal mines

AQ/T 1011-2005 煤矿在用主通风机系统安全检测检验规范

Specifications for safety inspection and inspection of main ventilator system in use in coal mines

MT/T 221-2005 煤矿用防爆灯具

Explosion-proof lamps for coal mines

MT 221-2005 煤矿用防爆灯具

本标准规定了煤矿用防爆灯具(以下简称灯具)的产品分类、要求，试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于具有甲烷或煤尘爆炸危险的煤矿井下工作面、巷道、硐室以及移动式设备上作照明用的灯具，不适用于矿用安全帽灯。

Explosion proof lamp for coal mine

DIN 22434-10:2005 无烟煤开采的井下照明.照明技术设计原则.第10部分:车间和特殊房屋

This standard specifies the ergonomic and lighting fundamentals for the planning of lighting installations for workshops and special premises in underground hardcoal mining.

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 10: Workshops and special premises

MT 927-2004 KL型矿灯

本标准规定了KL型矿灯的产品分类;要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KL型矿灯(以下简称矿灯)。

Model KL cap lamp

MT 242-2004 KJ型矿灯

本标准规定了KJ型矿灯的产品分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KJ型矿灯(以下简称矿灯)。

Model KJ cap lamp

MT 26-2004 KS型矿灯

本标准规定了KS型矿灯的产品分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KS型矿灯(以下简称矿灯)。

Model KS cap lamp

DS/EN 14591-1:2004 地下采矿的防爆和防护 防护系统 第1部分：2-bar 防爆通风结构

This document applies to air shutter frames and air doors for ventilation structures which are to remain functional after the passage of explosions with overpressures of up to 2 bar.

Explosion prevention and protection in underground mining - Protective systems - Part 1: 2-bar explosion proof ventilation structure

DIN 21639 Berichtigung 1:2004 对DIN 21639-1999的勘误

The document specifies the requirements for travel-way air locks in level and inclined mine excavations of mining. Travel-way air locks are built in connection with air locks. They allow travelling miners to pass the air lock without danger and to avoid air pressure reductions.

Corrigenda to DIN 21639:1999-09

KS E 4086-2004(2009) 矿用热风速仪便携式

Thermal anemometer for mines－Portable type

DIN 22434-8:2004 无烟煤矿井下照明.照明工艺设计原理.第8部分:建筑工地用

The document specifies the ergonomic and lighting fundamentals for the planning of lighting installations for building sites in underground hardcoal mining. This standard describes requirements for the illuminance and the arrangement of lighting. The terms building site and motional area are defined.

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 8: For building sites

DIN 21636:2003 采矿空气调节系统.带式输送机气阀.尺寸、标识、要求和试验

This standard applies to air locks for conveyors in mine excavation. They regulate the air within the region of conveyors. They are part of the air locks and are assembled in the air lock frame.

Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing

DIN 22434-5:2003 无烟煤地下开采照明.照明.技术规划基础.第5部分:物料输送区

The document specifies the ergonomic and lighting fundamentals for the planning of lighting installations for material handling places. It defines the term material handling places. Lighting installations shall fulfil the following requirements: clearness of the driveway, working place and transportation area and to facilitate hazard identification especially while working with machines and mechanical equipment as well as to identify people and objects from an adequate distance.#,,#

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 5: Material handling places