共找到 2659 条与 润滑剂、工业油及相关产品 相关的标准,共 178 页
本标准规定了由深度精制基础油并加抗氧剂和防锈剂等调制成的L-TSA汽轮机油的技术条件。 本标准所属产品适用于电力、工业、船舶及其他工业汽轮机组、水汽轮机组的润滑和密封。
Turbine oils L-TSA
Lubricating oils for total loss systems L-AN
本标准规定了用开特皮勒1G2法评定内燃机油的清净性和抗磨性能。 本标准适用于柴油机油(CD级)的性能评定,也适用于汽油机和柴油机的通用油、内燃机车用油等的性能评定。
The test method for evaluating the performance of internal combustion engine oil (Caterpillar 1G2 method)
本标准规定了用开特皮勒1H2法评定内燃机油的清净性和抗磨性能。 本标准适用于柴油机油(CD级)的性能评定,也适用于汽油机和柴油机的通用油、内燃机车用油等的性能评定。
The test method for evaluating the performance of internal combustion engine oil (Caterpillar 1H2 method)
本方法适用于预测发动机油在0~-40℃范围内的边界泵送温度。
Engine oil--Determination of borderline pumping temperature
本方法适用于测定中、高粘度润滑油的油和水互相分离的能力。本方法对易受水污染和可能遇到泵送及循环湍流而产生油包水型乳化液的润滑油抗乳化性能的测定具有指导意义。
Lubricating oils--Determination of demulsibility characteristics
本方法为使用中的内燃机油、工业润滑油等现场监控手段,包括粘度、水分、滤纸斑点、酸值和总碱值五个试验方法。
Field test for lubricating oil
本标准适用于经精制的直馏石油馏分并加有防锈、抗氧等多种添加剂而制得的校泵油。 本产品供柴油机喷油泵调试、校验和标定用,也适用于调试前喷油泵的清洗。 本标准参照国际标准ISO4113-1978《道路车辆--柴油机喷射设备的标定液制定》。
Calibration fluid for diesel injection pump
本标准规定了各种金属加工机床所选用的润滑剂品种和等级,它为机床制造厂推荐一个国内外统一采用的润滑剂名称(或符号)及其合理的应用范围。 本标准不包括机床制造厂与用户共同商订而选定的某些特定润滑剂。
Recommendations for the choice of lubricants for machine tools
本标准是GB7631的一部分,适用于制订润滑剂和有关产品的总分组体系,本类产品的类别名称用英文字母“L”表示。
Lubricants and related products (class L)--Classification--Part 1: General
本标准适用于测定运行中汽轮机油的破乳化度(即油与水分离的能力)。
Determination of clemulsibility characteristics of turbine oils in service
本方法适用于运行中汽轮机油和变压器油中2,6一二叔丁基对甲基酚(简称T501)含量的测定。
Determination of T501 oxidation inhibitor content in transformer and turbine oils in service by spectrophotometric method
本方法适用于测定运行变压器油中的水分。
Determination of water content in transformer oils in service by gas chromatographic method
本方法适用于测定运行变压器油中的水分含量。
Determination of water content in transformer oils in service by coulometric method
本方法适用于测定运行中变压器油、汽轮机油的酸值。
Determination of acid number in transformer and turbine oils in service by BTB method
本方法适用于测定运行中变压器油、汽轮机油的水溶性酸pH值。
Determination of water-soluble acid in transformer and turbine oils in service by colormetric method
本方法适用于变压器、互感器、油开关、套管等充油电气设备及汽轮机用油分析试验样品的采集。
Method of sampling for transformer and turbine oils inelectric power industry
本方法适用于测定润滑脂对铜的腐蚀性。 本方法不适用于测定除润滑脂本身外,而由其他因素引起的润滑脂抑制铜腐蚀的能力。也不测定在铜存在中润滑脂的安定性。
Lubricating grease--Corrosiveness to copper--Copper strip test
本方法适用于测定润滑脂和润滑油的蒸发损失。这些润滑剂在使用时蒸发损失为一项重要因素。蒸发损失可以在99~150℃的任一温度下进行测定。
Petroleum products--Lubricating greases and oils--Determination of evaporation loss
本标准适用于以动植物脂肪钙皂稠化矿物润滑油而制得的普通钙基润滑脂。 本产品适用于汽车、拖拉机、冶金、纺织等机械设备的润滑。使用温度范围为-10~60℃。
Calcium base grease
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号