75.160.20 液体燃料 标准查询与下载

EN 15692:2021 乙醇作为汽油的调和组分 水含量的测定 卡尔费歇尔电位滴定法

Ethanol as a blending component for gasoline - Determination of water content - Karl Fischer potentiometric titration method

T/QGCML 142-2021 治雾霾环保节能玫瑰汽油增效剂

本文件规定了治雾霾环保节能玫瑰汽油增效剂的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于汽车使用的治雾霾环保节能玫瑰汽油增效剂。

Environmental protection and energy saving rose gasoline synergist for smog control

EN 589:2018/prA1:2021 汽车燃料.液化石油气.要求和试验方法 包含修改件prA1,2021

Automotive fuels - LPG - Requirements and test methods

T/XXRL 20-2021 清洁汽油燃料

本文件规定了清洁汽油燃料的术语和定义、要求、试验方法、检验规则、标志、包装、运输、贮存、安全。 本文件适用于点燃式发动机使用的，以煤基费托合成汽油组分油、或组分油、含氧化合物及添加剂   为配料，按一定比例混合后制备而成的清洁汽油燃料。

Clean Gasoline fuel

T/XXRL 21-2021 清洁柴油燃料

本文件规定了清洁柴油燃料的术语和定义、要求、产品分类、试验方法、检验规则、标志、包装、   运输、贮存、安全。 本文件适用于压燃式发动机使用的，以煤基费托合成柴油组分油、或组分油、含氧化合物及添加剂   为配料，按一定比例混合后制备而成的清洁柴油燃料。

Clean diesel fuel

T/XXRL 01-2021 高清洁柴油燃料

本文件规定了高清洁柴油燃料的术语和定义、要求、试验方法、检验规则、标志、包装、运输、贮   存、安全等。 本文件适用于压燃式发动机机械设备使用的、以石化柴油、航空煤油、液体混合醇、醚类、脂肪酸   甲酯及添加剂为配料，按一定比例混合后制备成为的高清洁柴油燃料。

High Clean Diesel Fuel

KS M ISO PAS 23263:2021 石油产品.燃料（F类）.考虑到2020年实施最大0.50%硫 燃料供应商和用户对船用燃料质量的考虑

Petroleum products — Fuels(class F) — Considerations for fuel suppliers and users regarding marine fuel quality in view of the implementation of maximum 0.50 % sulfur in 2020

KS M ISO PAS 23263-2021 石油产品.燃料（F类）.考虑到2020年实施最大0.50%硫 燃料供应商和用户对船用燃料质量的考虑

Petroleum products — Fuels(class F) — Considerations for fuel suppliers and users regarding marine fuel quality in view of the implementation of maximum 0.50 % sulfur in 2020

ASTM D7547-21 烃类无铅航空汽油的标准规范

1.1?This specification covers formulating specifications for purchases of aviation gasoline under contract and is intended primarily for use by purchasing agencies. 1.2?Unleaded aviation gasoline defined by this specification is for use in engines and associated aircraft that a

Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

ASTM D8049-21 用直接成像分析仪测定轻质和中间馏出燃料中固体颗粒和水的浓度、计数和尺寸分布的标准试验方法

1.1 This test method uses a direct imaging analyzer to count and measure the size and shape of dispersed solid particles and water droplets in light and middle distillate fuels in the overall range from 4 µm to 100 µm and in size bands of ≥4 µm, ≥6 µm, and ≥14 µm. NOTE 1—Particle size data from 0.7 µm through 300 µm is available for use or reporting if deemed helpful. NOTE 2—Shape is used to classify particles, droplets, and bubbles and is not a reporting requirement. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer

ASTM D5006-11(2021) 航空燃料中燃料系统结冰抑制剂（以太类型）的测量标准测试方法

1.1 This test method covers a technique for measuring the concentration of Diethylene Glycol Monomethyl Ether (DiEGME) in aviation fuels. A measured volume of fuel, extracted with a fixed ratio of water, is tested with a suitable refractometer to determine the concentration of fuel system icing inhibitor (FSII) in fuel. Precision estimates have been determined for the DiEGME additive using specific extraction ratios with a wide variety of fuel types. The extraction ratios are high enough that portable handheld refractometers can be used, but not so high as to sacrifice accuracy or linearity, or both, in the 0.01 % to 0.25 % by volume range of interest. 1.2 DiEGME is fully described in Specification D4171 and in other specifications. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 WARNING—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use Caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

DIN EN 16942:2021 燃料. 车辆兼容性的识别. 消费者信息的图形表达; 德文版 EN 16942-2016+A1-2021

This European Standard lays down harmonized identifiers for marketed liquid and gaseous fuels. The requirements in this standard are set to complement information needs of users regarding the fuel- and vehicle-compatibility that are placed on the market. The development of this s

Fuels - Identification of vehicle compatibility - Graphical expression for consumer information; German version EN 16942:2016+A1:2021

prEN 16734-2021 汽车燃料 汽车 B10 柴油 要求和测试方法

Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods

prEN 16091-2021 液态石油产品 中间馏分油和脂肪酸甲酯（FAME）燃料和混合物 通过快速小规模氧化法测定氧化稳定性

Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method

prEN 590-2021 汽车燃料 柴油 要求和测试方法

Automotive fuels - Diesel - Requirements and test methods

BS ISO 6249:2021 石油产品 燃气轮机燃料热氧化稳定性的测定

Petroleum products. Determination of thermal oxidation stability of gas turbine fuels

DS/ISO 6249:2021 石油产品 燃气轮机燃料热氧化安定性的测定

Petroleum products – Determination of thermal oxidation stability of gas turbine fuels

UNI EN ISO 5165:2021 石油产品柴油点火质量的测定十六烷值发动机法

Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method

ONR CEN/TR 17544-2021 汽车燃料 关于脂肪酸甲酯（FAME）作为柴油燃料混合成分以及 FAME 含量高达 30%（V/V）的柴油的冷浸过滤器阻塞趋势（CS-FBT）研究报告

Automotive fuels - Report on studies done on cold soak filter blocking tendency (CS-FBT) on fatty acid methyl ester (FAME) as blend component for diesel fuel, and of diesel fuel containing up to 30 % (V/V) of FAME

ASTM D7687-21 通过过滤测量样品浓度的燃料和燃料相关水中的细胞三磷酸腺苷的标准测试方法

1.1?This test method covers a protocol for capturing, extracting and quantifying the cellular adenosine triphosphate (cellular-ATP) content associated with microorganisms found in fuels and fuel-associated water. 1.2?The ATP is measured using a bioluminescence enzyme assay, whe

Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration