75.160.20 液体燃料 标准查询与下载
共找到 3199 条与 液体燃料 相关的标准，共 214 页
1.1?This specification defines the minimum fuel quality requirements for gaseous fuels consisting primarily of methane when used as an internal combustion engine fuel. 1.2?This specification defines the criteria for compressed natural gas (CNG), liquefied natural gas (LNG), or
Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel
- ICS
- 75.160.20
- CCS
- 发布
- 2021-04-01
- 实施
1.1?This test method covers the determination of benzene, toluene, ethylbenzene, the xylenes, C9 and heavier aromatics, and total aromatics in finished motor gasoline by gas chromatography. 1.2?The aromatic hydrocarbons are separated without interferences from other hydrocarbon
Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene,
- ICS
- 75.160.20
- CCS
- 发布
- 2021-04-01
- 实施
1.1?This test method covers the determination of individual hydrocarbon components of spark-ignition engine fuels and their mixtures containing oxygenate blends (MTBE, ETBE, ethanol, and so forth) with boiling ranges up to 225 ��C. Other light liquid hydrocarbon mixtures typical
Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
- ICS
- 75.160.20
- CCS
- 发布
- 2021-04-01
- 实施
Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
- ICS
- 75.160.20
- CCS
- 发布
- 2021-04-00
- 实施
This document specifies a procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. It is applicable to middle distillate and wide-cut fuels and is particularly specified for the performance of aviation gas turbine fuels. The test results are indicative of fuel thermal oxidation stability during gas turbine operation and can be used to assess the level of deposits that form when liquid fuel contacts a heated surface at a specified temperature. This method is also applicable to aviation turbine fuel that consists of conventional and synthetic blending components as defined in the scope of for instance ASTM D7566[1] and Def Stan 91-091[2]. NOTE For the benefit of those using older instruments, non-SI-units and recalculated numbers are given in between brackets where they are more suitable.
Petroleum products - Determination of thermal oxidation stability of gas turbine fuels
- ICS
- 75.160.20
- CCS
- E30
- 发布
- 2021-04-00
- 实施
规定了醇醚清洁燃料[D型]的范围、规范性引用文件、术语和定义、产品分类、原料要求、 技术要求、检验规则、标志、包装、运输、贮存、安全
Alcohol ether clean fuel [Type D]
- ICS
- 75.160.20
- CCS
- C254
- 发布
- 2021-03-30
- 实施
- 2021-03-30
3.1 生物质基含氧调和油（Bio-based high-quality oxygenate blending oil）：生物质热解油提质处理后得到的液体产物，典型组分为含羟基官能团和醚基官能团的分子。 3.2 CN40生物质基含氧调和油：十六烷值在40-55之间的生物质基含氧调合油，主要适用于农用拖拉机。 3.3 CN55生物质基含氧调合油：十六烷值大于55的生物质基含氧调合油，主要适用于柴油机乘用车。 4 技术要求 柴油车用生物质基含氧调和油的技术指标和检验方法见表1。 表1 柴油车用生物质基含氧调和油技术指标和检验方法 项目 质量指标 检验方法 CN55 CN40 十六烷值 不低于 55 40 GB/T 386 长链醇醚类含量(体积分数)/% 不低于 70 SH/T 0663 密度 (20 oC)/(kg/m3) 600~800 GB/T 13377a 运动黏度(40 oC)/(mm2/s) 0.5~6.0 GB/T 265 闪点（闭口）/oC 不低于 101 GB/T 261 冷滤点/oC 报告 SH/T 0248 凝点/oC 不低于 -20 GB/T 510 硫含量/(mg/kg) 不大于 50 SH/T 0689b 残炭(质量分数)/% 不大于 0.05 GB/T 17144c 硫酸盐灰分(质量分数)/% 不大于 0.02 GB/T 2433 固体细颗粒物(质量分数)/% 不大于 0.01 ASTM D7579 水含量(质量分数)/% 不大于 0.1 SH/T 0246 机械杂质 无 GB/T 511d 铜片腐蚀(50 oC,3h)/级 不大于 1 GB/T 5096 氧化安定性(110 oC)/h 不小于 6.0e NB/SH/T 0825f 酸值(以KOH计)/(mg/g) 不大于 0.50 GB/T 7304g 90%回收温度/ oC 不高于 360 GB/T 9168 碱金属含量(Na+K)/(mg/kg) 不大于 5 GB/T 17476h 氧元素含量(质量分数)/% 不低于 10 NB/SH/T 0842i 热值/(MJ/kg) 不低于 21 GB/T 384 a 可用GB/T 5526、SH/T 0604、GB/T 1884、GB/T 1885方法测定，以GB/T 13377仲裁。 b 可用GB/T 11140、GB/T 12700、GB/T 17040和NB/SH/T 0842方法测定，以SH/T0689仲裁。 c 可用GB/T 268方法测定，以GB/T 17144仲裁。 d 可用目测法，将试样注入100ml玻璃量筒中，在室温（20 oC）下观察，应当透明，没有悬浮和沉降的机械杂质。结果有争议时，以GB/T 511仲裁。 e 可加抗氧剂。 f 可用EN15751方法测定，以NB/SH/T 0825仲裁。 g 可用GB/T 5530、GB/T 264 方法测定，以GB/T 7304仲裁。 h 可用ASTM D7111方法测定，以GB/T 17476仲裁。 i 可用SN/T 3128方法测定，以NB/SH/T 0842仲裁。
Technical specification and test method for diesel bio-based oxygenated blending oil
- ICS
- 75.160.20
- CCS
- C254
- 发布
- 2021-03-05
- 实施
- 2021-03-10
Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
- ICS
- 75.160.20
- CCS
- 发布
- 2021-03-03
- 实施
Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
- ICS
- 75.160.20
- CCS
- 发布
- 2021-03-00
- 实施
本标准规定了车用柴油快速检测近红外光谱法的原理、仪器、定标模型、样品测定、数据分析、精密度和试验报告。 本标准适用于车用柴油的快速检测。
Near Infrared Spectroscopy for Rapid Detection of Vehicle Diesel
- ICS
- 75.160.20
- CCS
- C251
- 发布
- 2021-02-25
- 实施
- 2021-09-25
本标准规定了车用柴油的快速筛查阈值、取样、快速筛查方法、快速筛查方法验证、移动设施、结果处理和报告。 本标准适用于车用柴油的快速筛查。
Technical specification for rapid screening of diesel fuel for vehicles
- ICS
- 75.160.20
- CCS
- C251
- 发布
- 2021-02-25
- 实施
- 2021-09-25
本标准规定了车用乙醇汽油（E10）的快速筛查阈值、取样、快速筛查方法、快速筛查方法验证、移动设施、结果处理和报告。 本标准适用于车用乙醇汽油（E10）的快速筛查。
Technical specifications for rapid screening of ethanol gasoline (E10) for vehicles
- ICS
- 75.160.20
- CCS
- C251
- 发布
- 2021-02-25
- 实施
- 2021-09-25
本标准规定了车用乙醇汽油快速检测近红外光谱法的原理、仪器、定标模型、样品测定、数据分析、精密度和试验报告。
Near-infrared spectroscopy for rapid detection of ethanol gasoline (E10) for vehicles
- ICS
- 75.160.20
- CCS
- C251
- 发布
- 2021-02-25
- 实施
- 2021-09-25
本文件规定了柴油发动机氮氧化物还原剂-尿素水溶液（AUS 32）快速检测近红外光谱法的原理、仪器、定标模型、样品测定、数据分析、精密度和试验报告。 本文件适用于柴油发动机氮氧化物还原剂-尿素水溶液（AUS 32）的快速检测。
Nitrogen oxide reducing agent for diesel engine - urea aqueous solution (AUS 32) rapid detection by near-infrared spectroscopy
- ICS
- 75.160.20
- CCS
- C251
- 发布
- 2021-02-25
- 实施
- 2021-09-25
Liquid petroleum products--Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
- ICS
- 75.160.20
- CCS
- 发布
- 2021-02-25
- 实施
- 2021-02-25
Liquid petroleum products--Vapour pressure--Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method)
- ICS
- 75.160.20
- CCS
- 发布
- 2021-02-22
- 实施
- 2021-02-22
Petroleum products--Determination of the ignition quality of diesel fuels--Cetane engine method (ISO 5165:2020)
- ICS
- 75.160.20
- CCS
- 发布
- 2021-02-05
- 实施
- 2021-02-05
1.1?This test method, commonly referred to as the Cummins ISB Test, covers the utilization of a modern, 5.9 L, diesel engine equipped with exhaust gas recirculation and is used to evaluate oil performance with regard to valve-train wear. 1.2?The values stated in SI units are to
Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
- ICS
- 75.160.20
- CCS
- 发布
- 2021-01-01
- 实施
1.1?This test method covers the determination of farnesane (2,6,10-trimethyldodecane), saturated hydrocarbons, and hexahydrofarnesol content in synthesized iso-paraffins (SIP) fuel for blending with jet fuel by gas chromatography. 1.2?Farnesane is determined from 96 % to 99.9 %
Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography
- ICS
- 75.160.20
- CCS
- 发布
- 2021-01-01
- 实施
1.1?This test method covers the description of the determination of the cloud point of petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness, by an automatic instrument using an optical device. 1.2?This test method covers the range of temperat
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
- ICS
- 75.160.20
- CCS
- 发布
- 2021-01-01
- 实施
