75.180.10 勘探和钻采设备 标准查询与下载

GSO ISO 11960:2023 石油和天然气工业 用作井套管或油管的钢管

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material. By agreement between the purchaser and manufacturer, this document can also be applied to other plain-end pipe sizes and wall thicknesses. This document is applicable to the following connections: — short round thread casing (SC); — long round thread casing (LC); — buttress thread casing (BC); — non-upset tubing (NU); — external upset tubing (EU); — integral-joint tubing (IJ). NOTE 1 For further information, see API Spec 5B. For such connections, this document specifies the technical delivery conditions for couplings and thread protection. NOTE 2 Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given in A.9 SR22. This document can also be applied to tubulars with connections not covered by ISO or API standards. This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80, C90, R95, T95, P110, C110 and Q125. This document is not applicable to threading requirements. NOTE 3 Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.

Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells

GSO ISO 19901-10:2023 石油和天然气工业 海上结构物的特殊要求 第10部分：海洋地球物理调查

This document provides requirements and guidelines for marine geophysical investigations. It is applicable to operators/end users, contractors and public and regulatory authorities concerned with marine site investigations for offshore structures for petroleum and natural gas industries. This document provides requirements, specifications, and guidance for: a) objectives, planning, and quality management; b) positioning; c) seafloor mapping, including instrumentation and acquisition parameters, acquisition methods, and deliverables; d) sub-seafloor mapping, including seismic instrumentation and acquisition parameters, and non-seismic-reflection methods; e) reporting; f) data integration, interpretation, and investigation of geohazards. This document is applicable to investigation of the seafloor and the sub-seafloor, from shallow coastal waters to water depths of 3 000 m and more. It provides guidance for the integration of the results from marine soil investigations and marine geophysical investigations with other relevant datasets. NOTE 1 The depth of interest for sub-seafloor mapping depends on the objectives of the investigation. For offshore construction, the depths of investigation are typically in the range 1 m below seafloor to 200 m below seafloor. Some methods for sub-seafloor mapping can also achieve much greater investigation depths, for example for assessing geohazards for hydrocarbon well drilling. There is a fundamental difference between seafloor mapping and sub-seafloor mapping: seafloor signal resolution can be specified, while sub-seafloor signal resolution and penetration cannot. This document therefore contains requirements for the use of certain techniques for certain types of seafloor mapping and sub-seafloor mapping (similarly, requirements are given for certain aspects of data processing). If other techniques can be shown to obtain the same information, with the same or better resolution and accuracy, then those techniques may be used. Mapping of pre-drilling well-site geohazards beneath the seafloor is part of the scope of this document. NOTE 2 This implies depths of investigation that are typically 200 m below the first pressure-containment casing string or 1 000 m below the seafloor, whichever is greatest. Mapping of pre-drilling well-site geohazards is therefore the deepest type of investigation covered by this document. In this document, positioning information relates only to the positioning of survey platforms, sources and receivers. The processes used to determine positions of seafloor and sub-seafloor data points are not covered in this document. Guidance only is given in this document for the use of marine shear waves (A.8.3.3), marine surface waves (A.8.3.4), electrical resistivity imaging (A.8.3.5) and electromagnetic imaging (A.8.3.6).

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 10: Marine geophysical investigations

GSO ISO 19901-8:2023 石油和天然气工业 海上结构物的特殊要求 第8部分：海洋土壤调查

ISO 19901-8:2014 specifies requirements, and provides recommendations and guidelines for marine soil investigations regarding: a) objectives, planning and execution of marine soil investigations; b) deployment of investigation equipment; c) drilling and logging; d) in situ testing; e) sampling; f) laboratory testing; and g) reporting. Rock materials are only covered by ISO 19901-8:2014 to the extent that ordinary marine soil investigation tools can be used, e.g. for chalk, calcareous soils, cemented soils or similar soft rock. ISO 19901-8:2014 is intended for clients, soil investigation contractors, designers, installation contractors, geotechnical laboratories and public and regulatory authorities concerned with marine soil investigations for any type of offshore and nearshore structures, or geohazard assessment studies, for petroleum and natural gas industries.

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations

GSO ISO 19901-9:2023 石油和天然气工业 海上结构物的特殊要求 第9部分：结构完整性管理

This document specifies principles for the structural integrity management (SIM) of offshore structures subjected to known or foreseeable types of actions. This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: — caissons, free-standing and braced; — jackets; — monotowers; — towers. This document is applicable to topsides, including but not limited to the main decks, deck legs, topsides modules, crane pedestals, helideck, drilling derrick, skid beams, flare booms, exhaust towers, radio tower, conductor support frames, and lifeboat davits. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (e.g. underwater oil storage tanks, bridges and connecting structures), to the extent to which its requirements are relevant. This document contains requirements for planning and engineering of the following tasks: a) integrity management data requirements; b) in-service inspection and integrity management of both new and existing structures; c) assessment of existing structures; d) evaluation of structures for reuse at different locations; e) evaluation of structures for their future removal.

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 9: Structural integrity management

T/SXBX 002-2023 单芯多功能水流测井仪

6 技术要求

Single core multifunctional flow logging tool

BS EN ISO 19905-3:2022 石油和天然气工业 移动式海上装置的现场特定评估 浮动装置

1   Scope This document specifies requirements and recommendations for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units . This document addresses mobile floating units that are monohull (e.g. ship-shaped vessels or barges); column-stabilized, commonly referred to as semi-submersibles; or other hull forms (e.g. cylindrical/conical shaped). It is not applicable to tension leg platforms. Stationkeeping can be provided by a mooring system, a thruster assisted mooring system, or dynamic positioning. The function of the unit can be broad, including drilling, floatel, tender assist, etc. In situations where hydrocarbons are being produced, there can be additional requirements. This document does not address all site considerations, and certain specific locations can require additional assessment . This document is applicable only to mobile floating units that are structurally sound and adequately maintained, which is normally demonstrated through holding a valid RCS classification certificate. This document does not address design, transportation to and from site, or installation and removal from site. This document sets out the requirements for site-specific assessments , but generally relies on other documents to supply the detail...

Petroleum and natural gas industries. Site-specific assessment of mobile offshore units - Floating units

T/SXBX 001-2023 生产测井四参数组合测井仪

6 技术要求

Production logging four-parameter combination logging tool

T/CASME 355-2023 油井液面智能监测系统

本文件规定了油井液面智能监测系统的术语和定义、产品分类、主要组成部件、型号和参数、技术要求、试验方法、检验规则、标志、随机文件、包装、运输及贮存。

Intelligent monitoring system of oil well liquid level

ASTM F1990-23 现场燃烧溢出油的标准指南:点火装置

1.1 This guide relates to the use of in-situ burning of spilled oil. The focus of the guide is in-situ burning of oil on water, but the ignition techniques and devices described in the guide are generally applicable to in-situ burning of oil spilled on land as well. 1.2 The purpose of this guide is to provide information that will enable oil-spill responders to select the appropriate techniques and devices to successfully ignite oil spilled on water. 1.3 This guide is one of four related to in-situ burning of oil spills. Guide F1788 addresses environmental and operational considerations. Guide F2152 addresses fire-resistant booms, and Guide F2230 addresses burning in ice conditions. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. In particular, the storage, transport, and use of ignition devices may be subject to regulations that will vary according to the jurisdiction. While guidance of a general nature is provided herein, users of this guide should determine regulations that apply to their situation. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices

23/30463688 DC BS EN ISO 15544 石油和天然气工业 海上生产装置 应急响应要求和指南

BS EN ISO 15544. Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response

ASTM E2928/E2928M-23 用交流磁场测量技术检验钻削螺纹的标准实施规程

1.1 This practice describes procedures to be followed during alternating current field measurement examination of drillstring threads on tubulars used for oil and gas exploration and production for detection and, if required, sizing of serviceinduced surface breaking discontinuities transverse to the pipe. 1.2 This practice is intended for use on threads in any metallic material. 1.3 This practice does not establish acceptance criteria. Typical industry practice is to reject these connections on detection of a confirmed crack. 1.4 While the alternating current field measurement technique is capable of detecting discontinuities in these connections, supplemental surface NDT methods such as magnetic particle testing for ferrous metals and penetrant testing for non-ferrous metals may detect additional discontinuities. 1.5 Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system might not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from both systems may result in nonconformance with the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

T/CAS ES200908004-2022 工业品质量分级评价规则 抽油杆 PE包覆抽油杆

1　范围 本文件规定了抽油杆中PE包覆抽油杆质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于PE包覆抽油杆（包括PE半包覆抽油杆、异型接头PE全包覆抽油杆）质量分级评价活动。 2　规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 228.1  金属材料 拉伸试验 第1部分：室温试验方法 GB/T 230.1  金属材料 洛氏硬度试验 第1部分：试验方法 GB/T 1033.1  塑料 非泡沫塑料密度的测定 第1部分：浸渍法、液体比重瓶法和滴定法 GB/T 1633  热塑性塑料维卡软化温度（VST）的测定 GB/T 2411  塑料和硬橡胶 使用硬度计测定压痕硬度（邵氏硬度） GB/T 3960  塑料 滑动摩擦磨损试验方法 GB/T 4340.1  金属材料 维氏硬度试验 第1部分：试验方法 GB/T 6461  金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 GB/T 6462  金属和氧化物覆盖层 厚度测量 显微镜法 GB/T 6671  热塑性塑料管材 纵向回缩率的测定（包含修改单1） GB/T 8804.3  热塑性塑料管材 拉伸性能测定 第3部分：聚烯烃管材 GB/T 10125  人造气氛腐蚀试验 盐雾试验 GB/T 11170  不锈钢 多元素含量的测定 火花放电原子发射光谱法（常规法） SY/T 5029—2013  抽油杆 SY/T 6662.1—2012  石油天然气工业用非金属复合管 第1部分：钢骨架增强聚乙烯复合管 T/CAS ES000000001—2022（V01） 工业品质量分级评价规则 通则 

Rules for quality grading and evaluating of industrial products—Sucker rods—PE coated sucker rods

T/CAS ES200399002-2022 工业品质量分级评价规则 动力猫道（自动甩钻杆装置、管杆自动 运输机）

1　范围 本文件规定了动力猫道（自动甩钻杆装置、管杆自动运输机）质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于动力猫道（自动甩钻杆装置、管杆自动运输机）质量分级评价活动。 2　规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 8423.5  石油天然气工业术语 第5部分：设备与材料 GB/T 9286  色漆和清漆 划格试验 SY/T 7421  石油天然气钻采设备 钻井和修井用管柱自动化处理系统 T/CAS ES000000001—2022（V01） 工业品质量分级评价规则 通则

Rules for quality grading and evaluating of industrial products—Power catwalk（automatic chucking device for drill pipe、automatic pipe and rod conveyer）

T/CAS ES200399003-2022 工业品质量分级评价规则 铁钻工

1　范围 本文件规定了铁钻工质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于铁钻工质量分级评价活动。 2　规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 8423.5  石油天然气工业术语 第5部分：设备与材料 GB/T 9286  色漆和清漆 划格试验 SY/T 5074  钻井和修井用动力钳、吊钳 SY/T 7421  石油天然气钻采设备 钻井和修井用管柱自动化处理系统 T/CAS ES000000001—2022（V01） 工业品质量分级评价规则 通则

Rules for quality grading and evaluating of industrial products—Iron roughneck

T/CAS ES015102001-2022 工业品质量分级评价规则 油管

1　范围 本文件规定了油管质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于油管的质量分级评价活动。 2　规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 21267  石油天然气工业 套管及油管螺纹连接试验程序 T/CAS ES000000001—2022（V01） 工业品质量分级评价规则 通则 API Spec 5B  套管、油管和管线管螺纹的加工、测量和检验 API Spec 5CT  套管和油管 ASTM A370  钢制品力学性能试验的标准试验方法和定义 ASTM A751  钢产品化学分析的试验方法、规程和术语 ASTM E23  金属材料缺口冲击测试的标准试验方法 ASTM E112  测定平均粒径的标准试验方法

Rules for quality grading and evaluating of industrial products—Tubing

22/30463692 DC BS EN ISO 13702 石油和天然气工业 控制和减轻海上生产设施的火灾和爆炸 要求和指南

BS EN ISO 13702. Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines

KS B ISO 17078-1:2022 石油和天然气工业.钻井和生产设备.第1部分:侧袋心轴

Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels

KS B ISO 17078-1-2022 石油和天然气工业.钻井和生产设备.第1部分:侧袋心轴

Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels

SY/T 5715-2022 石油天然气工业用碳钢、合金钢、不锈钢和镍基合金铸件

Carbon steel, alloy steel, stainless steel and nickel-based alloy castings for the oil and gas industry

SY/T 5059-2022 石油天然气钻采设备 组合泵筒管式抽油泵

Oil and gas drilling equipment combination pump barrel type oil pump