75.180.10 勘探和钻采设备 标准查询与下载

EN ISO 19901-5:2021 石油和天然气工业.海上结构的特殊要求.第5部分:设计和施工中的重量控制

This document specifies requirements for managing and controlling the weight and centre of gravity (CoG) of offshore facilities by means of mass management during all lifecycle phases including; conceptual design, front end engineering design (FEED), detail engineering, construction and operations. These can be new facilities (greenfield) or modifications to existing facilities (brownfield). Weight management is necessary throughout operations, decommissioning and removal to facilitate structural integrity management (SIM). The provisions of this document are applicable to fixed and floating facilities of all types. Weight management only includes items with static mass. Snow and ice loads are excluded as they are not considered to be part of the facility. Dynamic loads are addressed in ISO 19904-1, ISO 19901-6 and ISO 19901-7. This document specifies: a) requirements for managing and controlling weights and CoGs of assemblies and entire facilities; b) requirements for managing weight and CoG interfaces; c) standardized terminology for weight and CoG estimating and reporting; d) requirements for determining not-to-exceed (NTE) weights and budget weights; e) requirements for weighing and determination of weight and centre of gravity (CoG) of tagged equipment, assemblies, modules and facilities; This document can be used: f) as a basis for costing, scheduling or determining suitable construction method(s) or location(s) and installation strategy; g) as a basis for planning, evaluating and preparing a weight management plan and reporting system; h) as a contract reference; i) as a means of refining the structural analysis or model.

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight management (ISO 19901-5:2021)

21/30444400 DC BS EN ISO 13703-2 石油、石化和天然气工业 海上平台和陆上工厂的管道系统 第 2 部分：材料

BS EN ISO 13703-2. Petroleum, petrochemical and natural gas industries. Piping systems on offshore platforms and onshore plants - Part 2. Materials

SY/T 6865-2021 钻井液滤失量测试仪校准方法

Calibration method of drilling fluid filtration loss tester

SY/T 7615-2021 陆上纵波地震勘探资料处理技术规程

Technical regulations for onshore longitudinal wave seismic exploration data processing

SY/T 6587-2021 电子式井斜仪校准方法

Calibration method of electronic well inclination instrument

SY/T 6445-2021 石油管材常见缺陷术语

Terms for common defects in oil pipes

SY/T 7633-2021 储气库井套管柱安全评价方法

Safety evaluation method for gas storage well casing strings

SY/T 7635-2021 海底输油管道工艺设计规范

Submarine oil pipeline process design specifications

SY/T 6400-2021 气举阀性能试验方法

Gas lift valve performance test method

SY/T 6739-2021 石油钻井参数监测仪通用技术条件

General technical conditions for oil drilling parameter monitors

SY/T 7656-2021 石油天然气钻采设备 海洋钻井隔水管张紧系统

Oil and gas drilling equipment offshore drilling riser tensioning system

SY/T 6680-2021 石油天然气钻采设备 钻机和修井机出厂验收规范

Specifications for factory acceptance of drilling rigs and workover rigs for oil and gas drilling equipment

SY/T 6760-2021 石油天然气钻采设备 气胎离合器

Oil and gas drilling equipment pneumatic clutch

SY/T 7636-2021 水下电力与光纤接头及飞线的功能设计与测试技术规范

Functional design and testing technical specifications for underwater power and optical fiber connectors and flying leads

SY/T 7653-2021 石油天然气钻采设备 耐蚀螺栓连接

Corrosion-resistant bolt connections for oil and gas drilling equipment

SY/T 5723-2021 石油天然气钻采设备 山地地震钻机

Oil and gas drilling equipment mountain seismic drilling rig

SY/T 6844-2021 微电阻率成像测井仪

Microresistivity imaging logging tool

SY/T 5165-2021 石油井下取样器

Oil downhole sampler

SY/T 6870-2021 石油天然气钻采设备 顶部驱动系统安装、调试与维护

Installation, commissioning and maintenance of top drive systems for oil and gas drilling equipment

SY/T 6902-2021 海洋可控源电磁法勘探技术规程

Technical specification for marine controlled source electromagnetic prospecting