75.180.10 勘探和钻采设备 标准查询与下载

ISO 6398-1:2024 包括低碳能源在内的石油和天然气工业人工举升用潜水线性电机系统第1部分:潜水线性电机

Oil and gas industries including lower carbon energy — Submersible linear motor systems for artificial lift — Part 1: Submersible linear motor

ISO 15544:2024 石油和天然气工业海上生产设施应急响应要求和指南

Oil and gas industries — Offshore production installations — Requirements and guidelines for emergency response

T/QGCML 4303-2024 70D石油钻机

本文件规定了70D石油钻机的术语和定义、配置要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于70D石油钻机的生产和检验。

70D oil drilling rig

GSO ISO 19902:2024 石油和天然气工业 固定钢海上结构

This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: ? caissons, free-standing and braced; ? jackets; ? monotowers; ? towers. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (such as underwater oil storage tanks, bridges and connecting structures). This document contains requirements for planning and engineering of the design, fabrication, transportation and installation of new structures as well as, if relevant, their future removal. NOTE 1 Specific requirements for the design of fixed steel offshore structures in arctic environments are presented in ISO 19906. NOTE 2 Requirements for topsides structures are presented in ISO 19901-3; for marine operations in, ISO 19901‑6; for structural integrity management, in ISO 19901-9 and for the site-specific assessment of jack-ups, in ISO 19905‑1.

Petroleum and natural gas industries — Fixed steel offshore structures

GSO ISO 13680:2024 石油和天然气工业 用作套管、油管、接箍坯料和附件材料的耐腐蚀合金无缝管产品 技术交货条件

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels: — PSL-1, which is the basis of this document; — PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series. At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1. NOTE 1 The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2. NOTE 2 For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series. NOTE 3 Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F. This document contains no provisions relating to the connection of individual lengths of pipe. This document contains provisions relating to marking of tubing and casing after threading. This document is applicable to the following five groups of products: a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure; b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy; c) group 3, which is composed of stainless alloys with an austenitic structure (iron base); d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base); e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure. NOTE 4 Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.

Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions

GSO ISO/PAS 24565:2024 石油和天然气工业 陶瓷内衬管

This document specifies requirements for ceramic lined tubing (CLT) used in the petroleum and natural gas industries, including configuration and materials, manufacturing, inspection and testing, marking, packaging, transportation, and storage. This document is applicable to CLT manufactured by centrifugal self-propagating high-temperature synthesis. The applicable outside diameter of CLT ranges from 42,16 mm (1,66 inch) to 114,3 mm (4-1/2 inch). The steel grades include H40, J55, and N80 type 1. NOTE      Applicability of this document to other sizes and higher steel grades can be by agreement between the manufacturer and the purchaser. CLT is suitable for extracting multiphase fluid, hydrocarbon gas, hydrocarbon liquid, and water under corrosive, abrasive, wax deposition, scaling, and high temperature environments.

Petroleum and natural gas industries — Ceramic lined tubing

GSO ISO 19905-3:2024 石油和天然气工业 移动式海上设施现场特定评估 第3部分：浮动设施

This document specifies requirements and recommendations for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units. This document addresses mobile floating units that are monohull (e.g. ship-shaped vessels or barges); column-stabilized, commonly referred to as semi-submersibles; or other hull forms (e.g. cylindrical/conical shaped). It is not applicable to tension leg platforms. Stationkeeping can be provided by a mooring system, a thruster assisted mooring system, or dynamic positioning. The function of the unit can be broad, including drilling, floatel, tender assist, etc. In situations where hydrocarbons are being produced, there can be additional requirements. This document does not address all site considerations, and certain specific locations can require additional assessment. This document is applicable only to mobile floating units that are structurally sound and adequately maintained, which is normally demonstrated through holding a valid RCS classification certificate. This document does not address design, transportation to and from site, or installation and removal from site. This document sets out the requirements for site-specific assessments, but generally relies on other documents to supply the details of how the assessments are to be undertaken. In general: — ISO 19901‑7 is referenced for the assessment of the stationkeeping system; — ISO 19904‑1 is referenced to determine the effects of the metocean actions on the unit; — ISO 19906 is referenced for arctic and cold regions; — the hull structure and air gap are assessed by use of a comparison between the site-specific metocean conditions and its design conditions, as set out in the RCS approved operations manual; — ISO 13624‑1 and ISO/TR 13624‑2[1] are referenced for the assessment of the marine drilling riser of mobile floating drilling units. Equivalent alternative methodologies can be used; — IMCA M 220 is referenced for developing an activity specific operating guidelines. Agreed alternative methodologies can be used. NOTE RCS rules and the IMO MODU code[13] provide guidance for design and general operation of mobile floating units.

Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating units

GSO ISO 13679:2024 石油和天然气工业 套管和油管连接的试验程序

This document specifies tests to perform in order to determine the galling tendency, sealing performance and structural integrity of casing and tubing connections. "Casing" and "tubing" apply to the service application and not to the diameter of the pipe. This document covers the testing of connections for the most commonly encountered well conditions. Not all possible service scenarios are included. For example, the presence of a corrosive fluid, which can influence the service performance of a connection, is not considered. This document supplements API RP 5C5:2017, the requirements of which are applicable with the exceptions specified in this document.

Petroleum and natural gas industries — Procedures for testing casing and tubing connections

T/CPSI 01103-2024 钻机电控系统再制造升级技术规范

要求、信息需求清单、设计准则、再制造毛坯状态评估、拆解及检查、电气清洁零部件的分类、再制造升级设计、再制造加工、再制造装配、主电动机再制造要求、设备试验、系统试验、标识、质量保证和包装。

Technical specifications for remanufacturing and upgrading of drilling rig electronic control systems

T/CPSI 01102-2024 油田小修作业管柱自动化处理设备

针对陆地小修油水井自动化设备的设计、制造，适应小修作业的工况、工艺、场地等环境，标准内容包括技术要求、试验方法、检验规则、标志、包装、运输、贮存等

Automated processing equipment for pipe strings for minor repairs in oil fields

T/CASME 1324-2024 自动工件循环加工用液压动力头

本文件规定了自动工件循环加工用液压动力头的结构与技术参数、技术要求、试验方法、检验规则、使用说明书及标志、包装、运输、贮存等内容。

Hydraulic power head for automatic workpiece cycle processing

T/QGCML 3165-2024 智能泥浆阀组

本文件规定了智能泥浆阀组的术语和定义、组成及结构、材料要求、技术要求、试验方法、检验规则、标志、运输及贮存。 本文件适用于智能泥浆阀组的检验。

Intelligent mud valve group

T/QGCML 3110-2024 石油钻采用的压裂装置

本文件规定了石油钻采用的压裂装置的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于石油钻采用的压裂装置（以下简称“压裂装置”）的生产及检验。

Fracturing device used in oil drills

T/QGCML 3094-2024 用于桥墩桩基大口径打孔施工的钻头及其施工方法

本文件规定了用于桥墩桩基大口径打孔施工的钻头及其施工方法的术语和定义、用于桥墩桩基大口径打孔施工的钻头构成及原理、技术要求、试验方法、检验规则、施工方法。 本文件适用于用于桥墩桩基大口径打孔施工的钻头及其施工方法。

Drill bit used for large-diameter drilling construction of bridge pier pile foundation and its construction method

24/30456822 DC BS EN ISO 10855-3 海上集装箱和相关起重装置 第3部分：定期检查、检查和测试

BS EN ISO 10855-3 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing

T/QGCML 3063-2024 石油钻机用电控房

本文件规定了石油钻机用电控房的术语和定义、环境条件、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于石油钻机用电控房设计、生产及检验。

Electric control room for oil drilling rigs

T/CPI 24002-2023 海上平台潜油电泵地面控制系统配置指南

本文件规定了海上平台潜油电泵用地面控制系统的配置内容及要求。 本文件适用于海上平台潜油电泵的地面控制系统配置。

Offshore platform submersible electric pump surface control system configuration guide

T/CPI 13009-2023 175MPa节流和压井管汇性能试验方法

本文件规定了175MPa节流和压井管汇性能试验的仪器设备、样品、设计确认试验、工厂验收试验、试验方法、验收准则和试验报告的要求。 本文件适用于175MPa节流和压井管汇的设计确认试验和工厂验收试验。

175MPa choke and kill manifold performance test method

T/CPI 22001-2023 海上油气田开发项目节能设计指南

本文件规定了海上油气田开发项目节能设计的基本规定、总体布置、采油及采气、油气集输、处理与原油储存、注水及水处理、海底管道、泵与压缩机、电气、能源计量器具和能源在线监测系统、供热、采暖通风及空气调节、舾装的要求。 本文件适用于国内新建、扩建和改建的海上油气田开发项目节能设计，滩海油气田、陆上终端生产设施节能设计可参考执行。

Energy Saving Design Guidelines for Offshore Oil and Gas Field Development Projects

T/CPI 14001-2023 石油天然气工业 钻机检修流程规范

本文件规定了石油天然气陆地钻机检修流程及要求，明确了检修依据或条件、预检、技术方案、拆解、清洗、检验、综合评判、修理、维护、试验与验收以及文件和记录。 本文件适用于石油天然气陆地钻机的检修，海上平台用钻机检修可参照执行。

Oil and gas industry drilling rig maintenance process specifications