75.200 石油、石油产品和天然气储运设备 标准查询与下载

prEN 14161-2021 石油和天然气工业 管道运输系统（ISO 13623:2017，已修改）

Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2017, modified)

prEN 14870-4-2021 石油和天然气工业 管道输送系统的感应弯头、管件和法兰 第4部分：工厂冷弯（ISO 15590-4:2019，已修改）

Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 4: Factory cold bends (ISO 15590-4:2019, modified)

DS/EN ISO 20257-2:2021 液化天然气装置和设备《浮式液化天然气装置设计》第2部分：特殊 FSRU 问题（ISO 20257-2:2021）

Installation and equipment for liquefied natural gas – Design of floating LNG installations – Part 2: Specific FSRU issues (ISO 20257-2:2021)

DS/EN ISO 16486-5:2021 用于供应气体燃料的塑料管道系统 具有熔接和机械连接的未增塑聚酰胺（PA-U）管道系统 第5部分：系统适用性（ISO 16486-5:2021）

Plastics piping systems for the supply of gaseous fuels – Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing – Part 5: Fitness for purpose of the system (ISO 16486-5:2021)

ISO 20257-2:2021 液化天然气的装置和设备.浮式液化天然气装置的设计.第2部分：FSRU的具体问题

This document provides specific requirements and guidance for the design and operation of floating LNG storage and regasification units (FSRU) described in ISO 20257-1. This document is applicable to offshore, near-shore or docked FSRUs and to both new-built and converted FSRUs. This document includes requirements to the jetty when an FSRU is moored to a jetty.

Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 2: Specific FSRU issues

EN ISO 20257-2:2021 液化天然气的装置和设备.浮式液化天然气装置的设计.第2部分：FSRU的具体问题

Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 2: Specific FSRU issues (ISO 20257-2:2021)

EN 17278:2021 天然气车辆 车辆加油设备

Natural gas vehicles - Vehicle fuelling appliances

BS EN 1473:2021 液化天然气安装和设备 陆上设施设计

What is BS EN 1473 about? BS EN 1473 gives guidelines for the design, construction, and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG and natural gas (NG). BS EN 1473 gives a wide range of facilities from small to large, with the high and low-risk profile, etc., the acceptability criteria could vary depending on the project. Note 1: BS EN 1473 is applicable for plants with an LNG storage capacity over 200 t. Note 2: In the case of solutions using Floating Storage Unit (FSU) and land-based regasification, BS EN 1473 covers the on-shore part. Who is BS EN 1473 f or? BS EN 1473 on onshore installation designs is beneficial for: LNG industries and plants Chemical engineers Chemical factories Why should you use BS EN 1473 ? Liquefied Natural Gas (LNG) is a natural gas that has been cooled down to liquid form for ease and safety of non-pressurized storage or transport...

Installation and equipment for liquefied natural gas. Design of onshore installations

DS/EN 1473:2021 液化天然气装置及设备 陆上装置设计

Installation and equipment for liquefied natural gas – Design of onshore installations

NF M51-002:2021 液化天然气装置和设备 陆上装置设计

Installation and equipment for liquefied natural gas - Design of onshore installations

DS/ISO 16486-5:2021 供应气体燃料的塑料管道系统 具有熔接和机械连接的未增塑聚酰胺（PA-U）管道系统 第5部分：系统适用性

Plastics piping systems for the supply of gaseous fuels – Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing – Part 5: Fitness for purpose of the system

LST EN 13423-2021 天然气汽车 NGV车间要求和压缩天然气（CNG）汽车的管理

Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles

EN ISO 16486-5:2021 供应气体燃料的塑料管道系统 - 熔合连接和机械连接的未增塑聚酰胺（PA-U）管道系统 - 第5部分:系统的适用性

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system (ISO 16486-5:2021)

EN 1473:2021 液化天然气装置和设备.岸上装置的设计

Installation and equipment for liquefied natural gas - Design of onshore installations

LST EN 12514/AC-2021 液体燃料消耗装置的供应系统组件

Components for supply systems for consuming units with liquid fuels

PN-EN 17127-2021-04 E 室外加氢点分配气态氢并结合加注协议

Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols

OENORM EN ISO 16486-4:2021 用于供应气体燃料的塑料管道系统 具有熔接和机械连接的未增塑聚酰胺（PA-U）管道系统 第4部分：阀门（ISO/DIS 16486-4:2021）

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves (ISO/DIS 16486-4:2021)

UNI CEN/TR 15367-1-2021 石油产品 良好管理指南 第1部分：车用柴油燃料

Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels

CAN/CGSB-207.1-2021 便携式燃料容器蒸发排放的控制

© CGSB 2021 — All rights reserved 1 CAN/CGSB-207.1-2021 Control of evaporative emissions from portable fuel containers 1 Scope This National Standard of Canada applies to Portable Fuel Container (PFC) systems, and components sold separately, with a rated capacity between 1 L and 32 L that are designed, used, sold, advertised, or offered for sale for receiving, transporting, storing, and dispensing fuel used for internal combustion engines and kerosene as commonly used for heating and lighting applications. The testing and evaluation of PFCs to this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult with the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements before its use. Units of measurement – Quantities and dimensions used in this standard are in SI units, with the exception of the diurnal emissions limit in 5.3. 1.1 Exemptions This National Standard of Canada may not apply to: a. Containers approved by a nationally recognized testing laboratory as safety cans intended for industrial and commercial applications. Note Safety cans feature self-closing lids or valves with flame arrestor(s) in each opening and pressure relief devices, as described in the National Fire Code of Canada, Part 4. b. Containers or vessels that are not red, yellow or blue in colour and are permanently marked as containers that are not intended for use with flammable liquids. c. Containers that are designed and marketed solely for rapid refueling application in officially sanctioned off-highway motor sports such as car racing or motorcycle competitions, are unlikely to be used for non-racing applications and either create a leakproof seal against a stock target fuel tank or are designed to operate in conjunction with a receiver permanently installed on the target fuel tank. d. Portable fuel tanks manufactured specifically to deliver fuel through a hose attached between the portable fuel tank and an outboard marine engine for the purpose of delivering fuel to outboard marine engines during operation. e. Closed-system PFC systems that are used exclusively for fueling remote control model airplanes. f. One time use portable emergency fuel containers that comply with ASTM F2874.

Control of evaporative emissions from portable fuel containers

PN-EN ISO 16486-2-2021-03 E 供应气体燃料的塑料管道系统 具有熔接和机械连接的未增塑聚酰胺（PA-U）管道系统 第2部分：管道（ISO 16486-2:2020）

Plastics piping systems for the supply of gaseous fuels--Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 2: Pipes (ISO 16486-2:2020)