77.040.99 金属材料的其他试验方法 标准查询与下载

NF A04-113:1984 钢铁产品.由钢锭加工的高碳钢线材.化学杂质显示及描述的低倍检验法

Iron and steel. High carbon steel wire rod derived from ingots. Macrographic method of showing and describing the chemical heterogeneity.

BS 6533:1984 采用浓无机酸腐蚀对钢进行宏观检验指南

Gives guidance on and describes methods for the macroscopic examination of steel by etching with acids. The methods given make it possible to achieve an informed description of the etched surface.

Guide to macroscopic examination of steel by etching with strong mineral acids

NF A05-152:1984 钢产品.用强无机酸的低倍检查

Steel products. Macroscopic examination by etching with strong mineral acids.

NF A04-106:1984 钢铁.锻钢中非金属杂质含量的测定方法.第2部分:标准图象显微照像法

Iron and steel. Methods of determination of content of non metallic inclusions in wrought steel. Part II : micrographic method using standards diagrams.

NF A05-151:1984 钢产品.用硫印法的低倍检查(鲍曼法)

Steel products. Macrographic examination by sulfur print (Baumann method).

NF A05-153:1984 钢铁.用铜盐侵蚀法的低倍检查

Iron and steel. Macroscopic examination by means of copper salt etching.

NF A04-302:1984 钢铁.用断裂试验样件对奥氏体晶粒增长倾向和对工具钢硬化深度的测定(谢泼德试验)

Iron and steel. Determination using fracture test pieces of the austenitic grain growth tendency and of the hardness depth in tool steels (shepherd test).

NF A04-203:1984 钢产品.表面或感应淬火后硬化有效深度的测定

Steel products. Determination of the effective depth of hardening after flame or induction hardening.

NF A04-202:1984 钢制品.渗碳层和硬化层的有效深度的测定和检验

Steel products. Determination and verification of the affective depth of carburized and hardened cases.

NF A04-110:1984 钢铁.一般用途拔丝用非合金钢线材.表面检查

Iron and steel. Wire rods of non-alloy general purpose steel for wire drawing. Surface examination.

BS 6481:1984 火焰淬火或感应淬火后钢淬火有效深度测定方法

Method for determination of effective depth of hardening of steel after flame or induction hardening

BS 6479:1984 测定和鉴定钢内渗碳和淬火层有效深度的方法

Method for determination and verification of the effective depth of carburized and hardened cases in steels

ISO 643:1983 钢.铁素体或奥氏体晶粒大小的显微照相测定

Steels; Micrographic determination of the ferritic or austenitic grain size

CNS 9878-1983 铜及铜合金包层钢检验法

本标准规定铜及铜合金包层钢之检验法。

Method of Test for Copper and Copper Alldy Clad Steel

CNS 9872-1983 不锈钢包层钢检验法

本标准规定不锈钢包层钢之检验法。

Method of Test for Stainless-Clad Steel

CNS 9874-1983 镍及镍合金包层钢检验法

本标准规定镍及镍合金包层钢检验法。

Method of Test for Nickel and Nickel Alloy Clad Steels

CNS 9876-1983 钛包层钢检验法

本标准规定钛包层钢之检验法。

Method of Test for Titanium Clad Steel

BS 6285:1982 钢的硫印粗视组织检查法(鲍曼法)

Specifies the Baumann method for qualitative assessment of the position and quantity of sulphides present in steel.

Method for the macrographic examination of steel by sulphur print (Baumann method)

ISO 2639:1982 钢.渗碳层和硬化层的有效深度的测定和检验

Steel; Determination and verification of the effective depth of carburized and hardened cases

DIN IEC 60468:1981 金属材料电阻率测量方法

Method of measurement of resistivity of metallic materials