77.060 金属的腐蚀 标准查询与下载
共找到 1478 条与 金属的腐蚀 相关的标准，共 99 页
Cheese and cheese rind — Determination of natamycin content —Method by molecular absorption spectrometry and by high-performance liquid chromatography
- ICS
- 77.060
- CCS
- 发布
- 2021-12-31
- 实施
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
- ICS
- 77.060
- CCS
- 发布
- 2021-12-28
- 实施
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature(E-CLCT) for Ti alloys fabricated via the additive manufacturing method
- ICS
- 77.060
- CCS
- 发布
- 2021-12-28
- 实施
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
- ICS
- 77.060
- CCS
- 发布
- 2021-12-28
- 实施
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature(E-CLCT) for Ti alloys fabricated via the additive manufacturing method
- ICS
- 77.060
- CCS
- 发布
- 2021-12-28
- 实施
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
- ICS
- 77.060
- CCS
- 发布
- 2021-12-28
- 实施
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
- ICS
- 77.060
- CCS
- 发布
- 2021-12-28
- 实施
Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
- ICS
- 77.060
- CCS
- 发布
- 2021-12-14
- 实施
Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
- ICS
- 77.060
- CCS
- 发布
- 2021-12-14
- 实施
Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
- ICS
- 77.060
- CCS
- 发布
- 2021-12-14
- 实施
Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
- ICS
- 77.060
- CCS
- 发布
- 2021-12-14
- 实施
Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
- ICS
- 77.060
- CCS
- 发布
- 2021-12-14
- 实施
Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
- ICS
- 77.060
- CCS
- 发布
- 2021-12-14
- 实施
本文件规定了油管和套管全尺寸应力腐蚀性能测试术语与定义、原理、试验介质、试验设备、试样、试验程序、试验结果和试验报告等。 本文件适用于模拟规格在Φ 60 mm ~Φ 127 mm 范围内的实物油管和套管，在内部接触腐蚀性介质、同时承受轴向拉伸载荷和/或内压作用下的耐蚀性能及接头密封性能的测试。
Test method of full-scale stress corrosion experiment for tubing and casing
- ICS
- 77.060
- CCS
- C351
- 发布
- 2021-11-16
- 实施
- 2021-11-17
本文件规定了含硫化氢和氧气注入环境中的术语和定义、试验原理、试验溶液、试验气体、试验容器和装置、试样要求、腐蚀失重试验、硫化物应力开裂试验、结果评定和试验报告等。 本文件适用于含氧酸性注入环境中的抗硫石油管材的选材及适用性评价，涉及集气站、注气井场用碳钢、低合金钢及不锈钢材质输送管，以及井下碳钢、低合金钢及不锈钢材质油管、套管和钻具。本文件不适用于含CO2注入环境中的石油管材的选材及适用性评价。
Corrosion test method of tubular goods in H2S and O2-containing injection environment
- ICS
- 77.060
- CCS
- C351
- 发布
- 2021-11-16
- 实施
- 2021-11-17
1.1 This guide covers procedures, specimens, and equipment for conducting laboratory corrosion tests on metallic materials under conditions of high pressure (HP) or the combination of high temperature and high pressure (HTHP). See 3.2 for definitions of high pressure and temperature. 1.2 The procedures and methods in this guide are applicable for conducting mass loss corrosion, localized corrosion, and electrochemical tests as well as for use in environmentally induced cracking tests that need to be conducted under HP or HTHP conditions. 1.3 The primary purpose for this guide is to promote consistency of corrosion test results. Furthermore, this guide will aid in the comparison of corrosion data between laboratories or testing organizations that utilize different equipment. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
- ICS
- 77.060
- CCS
- 发布
- 2021-11-01
- 实施
This document specifies procedures for designing, preparing and using pre-cracked specimens for investigating the susceptibility of metal to stress corrosion cracking (SCC) by means of tests conducted under rising load or rising displacement. Tests conducted under constant load o
Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2021); German version EN ISO 7539-9:2021
- ICS
- 77.060
- CCS
- H25
- 发布
- 2021-11-01
- 实施
Electrical methods of temperature measurements
- ICS
- 77.060
- CCS
- 发布
- 2021-10-22
- 实施
BS ISO 4212. Corrosion of Metals and Alloys. Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel
- ICS
- 77.060
- CCS
- 发布
- 2021-10-11
- 实施
- 2021-10-11
本标准是针对材料腐蚀大数据技术中数据分析、处理、挖掘及可视化方法而制定的数据处理规范，并在此基础上提出了适用于材料耐蚀性的大数据评价方法。
Material Corrosion Big Data Evaluation Technology—Corrosion Clock Diagram Method
- ICS
- 77.060
- CCS
- M731
- 发布
- 2021-10-01
- 实施
- 2022-05-20
