77.060 金属的腐蚀 标准查询与下载

ISO 11463:2020 金属和合金的腐蚀 - 点腐蚀的评估

This document gives guidelines for the selection of procedures that can be used in the identification and examination of corrosion pits and in the evaluation of pitting corrosion and pit growth rate.

Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion

ISO 22910:2020 金属和合金的腐蚀用添加剂制造法制造的钛合金的电化学临界局部腐蚀温度（E-CLCT）的测量

This document specifies procedures for testing the resistance to localized corrosion of Ti alloys fabricated via additive manufacturing (AM) method. This document regulates the electrochemical critical localized corrosion temperature (E-CLCT) of the AM Ti materials for a comparative evaluation of resistance to localized corrosion.

Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method

ASTM D1838-20 液化石油气（LP）气体铜条腐蚀的标准试验方法

Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

BS EN ISO 7539-10:2020 金属和合金的腐蚀 应力腐蚀测试 反向 U 形弯曲法

What is ISO 7539 ‑ 10 about?   ISO 7539 ‑ 10 is the 10 th part of a multi-series standard. It deals with stress corrosion testing for metals and alloys using the reverse U-bend method.   ISO 7539 ‑ 10 specifies procedures for designing, preparing and using reversed U-bend (RUB) test specimens for investigating the susceptibility of the metal to stress corrosion cracking.   ISO 7539

Corrosion of metals and alloys. Stress corrosion testing - Reverse U-bend method

BS ISO 22410:2020 金属和合金的腐蚀 电化学测量离子迁移电阻来表征耐候钢的保护锈层

What is ISO 22410 about?   ISO 22410 is an international standard that provides technical specifications to measure ion transfer resistance to characterize the protective rust layer on weathering steel.   ISO 22410 specifies a method for the electrochemical measurement of ion transfer resistance of the rust layer formed on weathering steel alloys in order to assess their protective properties against corrosion thereafter. ISO 22410 uses an electrochemical AC impedance measurement, together with harmonic analysis, to identify the ion transfer resistance, and a rust thickness measurement to characterize the stability of the protective rust layer underused environments.   Who is ISO 22410 for?  

Corrosion of metals and alloys. Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel

BS EN ISO 11844-2:2020 金属和合金的腐蚀 室内大气低腐蚀性分级.室内大气腐蚀的测定

What is ISO 11844 ‑ 2 about ?   ISO 11844-2 is the first part of the ISO 11844 series of documents on corrosion of metals and alloys. ISO 11844-2 is an international standard on corrosion of metals and alloys that assists you to calculate the indoor corrosivity of metal and alloys.   ISO 11844 ‑ 2 specifies methods for determining corrosion rates with standard specimens of metals in indoor atmospheres with low corrosivity.  

Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres - Determination of corrosion attack in indoor atmospheres

BS EN ISO 11844-1:2020 金属和合金的腐蚀 室内大气低腐蚀性的分级 室内腐蚀性的测定和评价

What is ISO 11844 ‑ 1 about ?   ISO 11844 ‑ 1 is the first part of the ISO 11844 series of documents on corrosion of metals and alloys. ISO 11844 is an international standard on corrosion of metals and alloys that assists you to calculate the indoor corrosivity of metal and alloys.   ISO 11844 ‑ 1 establishes a classification of low corrosivity of indoor atmospheres.

Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres - Determination and estimation of indoor corrosivity

ISO 22410:2020 金属及合金腐蚀耐候钢保护锈层离子转移电阻的电化学测定

This document specifies a method for the electrochemical measurement of ion transfer resistance of the rust layer formed on weathering steel alloys in order to assess their protective properties against corrosion thereafter[3]. This method uses an electrochemical AC impedance measurement[4][5][6] [7][8] , together with harmonic analysis, to identify the ion transfer resistance, and a rust thickness measurement to characterize the stability of the protective rust layer in terms of corrosion protection under used environments.

Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel

EN ISO 11844-2:2020 金属与合金的腐蚀.室内空气低腐蚀性分类.第2部分:室内空气中腐蚀作用的测定

This document specifies methods for determining corrosion rates with standard specimens of metals in indoor atmospheres with low corrosivity. For this direct method of evaluation corrosivity, different sensitive methods can be applied using standard specimens of the following metals: copper, silver, zinc, steel and lead. The values obtained from the measurements are used as classification criteria for the determination of indoor atmospheric corrosivity.

Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2020)

EN ISO 11844-1:2020 金属和合金的腐蚀.室内空气低腐蚀性的分类.第1部:室内腐蚀性的测定和评估

This document establishes a classification of low corrosivity of indoor atmospheres. It specifies the reference metals for which a corrosion attack after a defined exposure period is used for determining corrosivity categories of indoor atmospheres of low corrosivity. It defines corrosivity categories of indoor atmospheres according to corrosion attack on standard specimens. It indicates important parameters of indoor atmospheres that can serve as a basis for an estimation of indoor corrosivity. The selection of a method for the determination of corrosion attack, description of standard specimens, exposure conditions and evaluation are given in ISO 11844-2. The measurement of environmental parameters affecting indoor corrosivity is given in ISO 11844-3.

Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity (ISO 11844-1:2020)

ISO 11844-2:2020 金属和合金的腐蚀 - 室内环境低腐蚀性分类 - 第2部分:室内环境腐蚀侵蚀的测定

This document specifies methods for determining corrosion rates with standard specimens of metals in indoor atmospheres with low corrosivity. For this direct method of evaluation corrosivity, different sensitive methods can be applied using standard specimens of the following metals: copper, silver, zinc, steel and lead. The values obtained from the measurements are used as classification criteria for the determination of indoor atmospheric corrosivity.

Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres

EN ISO 7539-10:2020 金属和合金的腐蚀.应力腐蚀试验.第10部分:颠倒u型弯管方法

This document specifies procedures for designing, preparing and using reversed U-bend (RUB) test specimens for investigating the susceptibility of the metal to stress corrosion cracking. The term "metal" as used in this document includes alloys.

Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method (ISO 7539-10:2020)

ISO 11844-1:2020 金属和合金的腐蚀 - 室内环境低腐蚀性的分类 - 第1部分:室内腐蚀性的测定和估计

This document establishes a classification of low corrosivity of indoor atmospheres. It specifies the reference metals for which a corrosion attack after a defined exposure period is used for determining corrosivity categories of indoor atmospheres of low corrosivity. It defines corrosivity categories of indoor atmospheres according to corrosion attack on standard specimens. It indicates important parameters of indoor atmospheres that can serve as a basis for an estimation of indoor corrosivity. The selection of a method for the determination of corrosion attack, description of standard specimens, exposure conditions and evaluation are given in ISO 11844-2. The measurement of environmental parameters affecting indoor corrosivity is given in ISO 11844-3.

Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity

ISO 21062:2020 金属和合金的腐蚀 - 比较混凝土暴露于模拟海洋环境的混凝土中的嵌入式钢筋的腐蚀速率的方法

This document specifies the apparatus, materials, specimen preparation, procedures, results and reports for comparing the corrosion rates of steel reinforcement bars in concrete in simulated marine and coastal environments. This document is not applicable to galvanized steel reinforcement. It gives guidelines for material selection in corrosion design. In order to illustrate the methodology, Annex A provides examples of experimental results.

Corrosion of metals and alloys — Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments

ISO 7539-10:2020 金属和合金的腐蚀 - 应力腐蚀测试 - 第10部分:反向U形弯曲​​法

This document specifies procedures for designing, preparing and using reversed U-bend (RUB) test specimens for investigating the susceptibility of the metal to stress corrosion cracking. The term “metal” as used in this document includes alloys.

Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method

ASTM A1068-10(2020) 钢铁产品腐蚀防护系统生命周期成本分析标准实践

1.1 This practice covers a procedure for using life-cycle cost (LCC) analysis techniques to evaluate alternative corrosion protection system designs that satisfy the same functional requirements. 1.2 The LCC technique measures the present value of all relevant costs of producing and rehabilitating alternative corrosion protection systems, such as surface preparation, application, construction, rehabilitation, or replacement, over a specified period of time. 1.3 Using the results of the LCC analysis, the decision maker can then identify the alternative(s) with the lowest estimated total cost based on the present value of all costs. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products

T/CNS 16-2020 金属和合金在液态铅合金中腐蚀减薄量测定

本标准规定了金属和合金在液态铅合金（包括纯铅、铅铋合金、铅锂合金等）环境下腐蚀减薄量的测量和计算方法。 本标准适用于金属和合金在液态铅合金环境中均匀腐蚀减薄量和局部腐蚀最大深度的测定。金属和合金在其他环境中腐蚀减薄量的测定，以及金属和合金涂层未失效情况下涂层的腐蚀减薄量的测定也可参考使用。

Determination of corrosion loss of metals and alloys in liquid lead alloys

BS ISO 11845:2020 金属和合金的腐蚀 腐蚀测试的一般原则

What is ISO 11845 - General principles for corrosion testing   about?   ISO 11845 specifies general principles for carrying out corrosion tests under conditions of constant immersion.    Some of these general principles are applicable to other types of corrosion testing.    NOTE: ISO 11845 does not cover important procedures for stress corrosion testing.  Who is ISO 11845 - General principles for corrosion testing   for?   

Corrosion of metals and alloys. General principles for corrosion testing

ISO 11845:2020 金属和合金的腐蚀.腐蚀试验的一般原则

This document specifies general principles for carrying out corrosion tests under conditions of constant immersion. Some of these general principles are applicable to other types of corrosion testing. This document does not cover important procedures for stress corrosion testing, such as those given in

Corrosion of metals and alloys — General principles for corrosion testing

BS ISO 22426:2020 基于挂片测量评估阴极保护的有效性

What is ISO 22426 about?   ISO 22426  is a standard that serves technical specifications for the effectiveness of cathodic protection based on coupon measurements.   ISO 22426  specifies requirements for the design, installation, positioning, sizing, use and maintenance of coupons for the assessment of the effectiveness of cathodic protection (CP) of buried and immersed metallic structures, such as pipelines, in the case of normal operation as well as AC and DC interference conditions.   ISO 22426  provides information on coupon cathodic protection which involves the application, design, monitoring, installation and commissioning of coupons.   Who is ISO 22426 for?

Assessment of the effectiveness of cathodic protection based on coupon measurements