77.080.10 铁 标准查询与下载

BS ISO 21988:2007 耐磨铸铁.分类

ISO 21988:2006 defines the grades of abrasion-resistant white cast irons. It specifies the grades in terms of chemical composition and hardness. The types of abrasion-resistant white cast irons covered are unalloyed or low alloy cast irons, nickel-chromium cast irons and high chromium cast irons.

Abrasion-resistant cast irons - Classification

KS D 4318-2006(2011) 沃斯回火球状石墨铸铁件

Austempered spheroidal graphite iron castings

KS D 4301-2006(2011) 灰铁铸件

Grey iron castings

KS V 3027-2006(2011) 船用铸钢套管式膨胀节

Ships’ cast steel pipe sleeve type expansion joints

KS V 3031-2006(2011) 船用钢管箍

Ships’ steel pipe bands

KS V 3026-2006(2011) 船用铸铁管套式膨胀节

Ships’ cast iron pipe sleeve type expansion joints

KS D ISO TR 15931-2006(2011) 铸铁和猪铁指定系统

Designation system for cast irons and pig irons

NF A32-301/A1:2006 铸造.奥氏体铸铁

This document (EN 13825:2002/A1:2006) has been prepared by Technica Committee CEN/TC 190 "Foundry technoogy", the secretariat of which is he d by DIN. This Amendment to the European Standard EN 13835:2002 sha be given the status of a nations satndard, either by publication of an identica text or by endorsment, at the atest by December 2006, and conficting nationa standards sha be withdrawn at the atest by December 2006.

Founding - Austenitic cast irons.

NF A32-701/A1:2006 铸造.可锻铸铁

Founding - Malleable cast irons.

ISO 16112:2006 紧密石墨铸铁(蠕墨铸铁).分类

This International Standard specifies five grades of compacted (vermicular) graphite cast irons. This International Standard specifies five grades based on the minimum mechanical properties measured on machined test pieces prepared from -- separately cast samples, -- cast-on samples, or -- samples cut from a casting.

Compacted (vermicular) graphite cast irons - Classification

ISO 21988:2006 耐磨铸铁.分类

This International Standard defines the grades of abrasion-resistant white cast irons. It specifies the grades in terms of: — chemical composition; — hardness. The types of abrasion-resistant white cast irons covered by this International Standard are: a) unalloyed or low alloy cast irons; b) nickel-chromium cast irons covering two general types: 4 % Ni 2 % Cr cast irons; 9 % Cr 5 % Ni cast irons; c) high chromium cast irons covering five ranges of chromium content: Cr> 11 % tos; 14%; Cr>14%to< 18%; Cr>18%to23%to^30%; Cr > 30 % to ^ 40 %.

Abrasion-resistant cast irons - Classification

NF A32-202/A1:2006 铸造.等温淬火球墨铸铁

Founding - Austempered ductile cast irons.

DIN EN 1564:2006 铸造.奥氏体铸铁

This European Standard defines the grades and the corresponding properties of austempered ductile cast irons. This European Standard specifies a classification based on mechanical properties measured on machined test pieces prepared from: -- separately cast samples; -- cast-on samples; -- samples cut from a casting. This standard does not cover technical delivery conditions for austempered ductile cast iron castings, see EN 1559-1 and EN 1559-3.

Founding - Austempered ductile cast irons(includes Amendment A1:2006); English version of DIN EN 1564:2006-03

BS ISO 17804:2006 铸造.奥氏球墨奥氏铸铁.分类

It defines the grades and the corresponding requirements for ausferritic spheroidal graphite cast irons. It specifies five grades of ausferritic spheroidal graphite cast iron by a classification based on mechanical properties measured on machined test pieces prepared from separately cast samples or cast-on samples, and samples cut from a casting. It also specifies two grades by a classification as a function of hardness.

Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification

NF A32-201/A2:2005 铸造.球墨铸铁

Founding - Spheroidal graphite cast irons.

ISO 17804:2005 铸件.奥氏体球墨铸铁.分类

This International Standard defines the grades and the corresponding requirements for ausferritic spheroidal graphite cast irons. This International Standard specifies five grades of ausferritic spheroidal graphite cast iron by a classification based on mechanical properties measured on machined test pieces prepared from: — separately cast samples or cast-on samples; — samples cut from a casting. This International Standard also specifies two grades by a classification as a function of hardness.

Founding - Ausferritic spheroidal graphite cast irons - Classification

DIN EN 1563:2005 铸造.球墨铸铁

This European Standard defines the grades and the corresponding requirements of spheroidal graphite cast iron. This European Standard specifies a classification based on mechanical properties measured on machined test pieces prepared from: - separately cast test samples; - cast-on samples; - samples cut from arom a casting. This European Standard also specifies a classification as a function of hardness. This standard does not apply to spheroidal graphite cast iron used for pipes, fitting and accessories which are the subject of EN 545, EN 598, EN 969 and ISO 2531.#,,#

Founding - Spheroidal graphite cast irons; German version EN 1563:1997 + A1:2002 + A2:2005

ISO 185:2005 灰铸铁.分类

This International Standard specifies the properties of unalloyed and low-alloyed grey cast irons used for castings, which have been manufactured in sand moulds or in moulds with comparable thermal behaviour. This International Standard specifies the characterizing properties of grey cast iron by either a) the tensile strength of separately cast samples, or if agreed by the manufacturer and the purchaser, of cast-on samples or samples cut from a casting (see Table 1), or b) if agreed between the manufacturer and the purchaser, the hardness of the material measured on castings (see Table 2) or on a cast-on knob. If agreed by the manufacturer and the purchaser, the combination of both tensile strength from option a) and hardness from option b) may be specified. When specifying a combination of tensile strength and hardness, it is recommended to consult the information in Annex B. This International Standard does not apply to grey cast irons used for pipes and pipe fittings and continuous cast products. This International Standard specifies eight grades of grey cast iron according to the tensile strength (see Table 1) and six grades of grey cast iron according to the Brinell hardness (see Table 2).

Grey cast irons - Classification

ISO 5922:2005 可锻铸铁

This International Standard specifies requirements for two types of malleable cast iron, namely whiteheart malleable cast iron and blackheart malleable cast iron, used in the manufacture of castings. Classification is given for each type of malleable cast iron on the basis of mechanical properties determined on separately cast test pieces. This International Standard is applicable only to malleable cast iron cast into sand moulds or moulds of comparable thermal diffusivity.

Malleable cast iron

KS V 3032-2004(2009) 船用钢管U型螺栓

Ships’ steel pipe U－bolts