77.080.10 铁 标准查询与下载

ISO/TR 15931:2004 铸铁和生铁锭的名称与符号系统

The aims of this Technical Report are: — to make the designation of cast irons and pig irons as simple and as understandable as possible, bearing in mind language barriers world-wide; — to define cast iron and pig iron designations by a simple code consisting of relevant letters and numbers only, taking into account the guidance given in Technical Report ISO/TR 7003; — to ensure that the agreed system is user-friendly from the point of view of the casting designer, the manufacturer (founder) and the user; — to ensure that the designation system clearly defines the materials described by standards and details all of the important attributes of mechanical properties, chemical composition and additional features that need to be described.

Designation system for cast irons and pig irons

SANS 11564:2004 熔铸-奥贝球铁

Defines the grades and corresponding properties of austempered ductile cast irons. Specifies a classification based on mechanical properties measured on machine test pieces.

Founding - Austempered ductile cast irons

ISO 1083:2004 球墨铸铁 分类

This International Standard defines the grades and the corresponding requirements for spheroidal graphite cast irons. This International Standard specifies a classification based on mechanical properties measured on machined test pieces prepared either from: — separately cast samples; — cast-on samples; — samples cut from a casting. This International standard also specifies a classification as a function of hardness. This International Standard does not apply to spheroidal graphite cast iron used for pipes, fittings and accessories which are specified in accordance with ISO 2531 and ISO 7186. It does not apply to highly alloyed (austenitic) spheroidal cast irons which are specified in accordance with ISO 2892. This International Standard does not apply to ausferritic cast irons which are specified in accordance with ISO 17804.

Spheroidal graphite cast irons - Classification

KS D ISO 9147-2003(2013) 生铁的定义和分类

Pig－irons－Definition and classification

NF A32-301:2003 铸造.奥氏体铸铁

This European Standard specifies the grades and corresponding requirements for austenitic cast irons. These requirements are specified in terms of: - graphite form and metal structure: either flake or spheroidal graphite in an austenitic matrix; - chemical composition: as given for each of the grades; - mechanical properties: obtained from separately cast samples.

Founding - Austenitic cast irons.

BS EN 13835:2002 铸造(学).奥氏体铸铁

This European Standard specifies the grades and corresponding requirements for austenitic cast irons. These requirements are specified in terms of: ??graphite form and metal structure: either flake or spheroidal graphite in an austenitic matrix; ??chemical composition: as given for each of the grades; ??mechanical properties: obtained from separately cast samples.

Founding - Austenitic cast irons

AS 5049:2002 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Specifies a method of designating the microstructure of graphite in cast iron. It is not intended as a basis for acceptance specifications. This Standard is identical with and has been reproduced from ISO 945:1975.

Cast iron - Designation of microstructure of graphite

KS D 4305-2001 白心可锻铸铁件

WHITEHEART MALLEABLE IRON CASTINGS

KS D 4303-2001 黑心可锻铸铁件

BLACKHEART MALLEABLE IRON CASTINGS

KS D 4319-2001(2011) 奥氏体铸件

AUSTENITIC IRON CASTINGS

DIN EN 12513:2001 铸造.耐磨铸铁

The document defines the grades of abrasion resistant white cast irons. It specifies the grades in terms of chemical composition and hardness. The types of abrasion resistant white cast irons covered by this document are: a) unalloyed or low alloy cast irons; b) nickel-chromium cast irons coversing two general types; c) high chomiuim cast irons covering four ranges of chromium content and for each chromium content range, three ranges of carbon content.#,,#

Founding - Abrasion resistant cast irons; German version EN 12513:2000

BS EN 12513:2000 铸造.铸铁耐磨性

This European Standard defines the grades of abrasion resistant white cast irons. It specifies the grades in terms of: - chemical composition; - hardness. The types of abrasion resistant white cast irons covered by this standard are: a) unalloyed or low alloy cast irons; b) nickel-chromium cast irons covering two general types: - 4 % Ni 2 % Cr cast irons; - 9 % Cr 5 % Ni cast irons; c) high chromium cast irons covering four ranges of chromium content: -11%

Founding - Abrasion resistant cast irons

ISO 15968:2000 直接还原铁 HBI表观密度和吸湿水的测定

This International Standard specifies a method for the determination of the apparent density and water absorption of hot briquetted iron (HBI).

Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron (HBI)

ASTM A197/A197M-00(2015) 熔铁炉展性铸铁的标准规格

1.1 This specification covers malleable irons for castings made by the cupola process. 1.2 Without knowledge of casting geometry and process details, quantitative relationships cannot be stated between the properties of the iron in the various locations of a casting and those of a test bar cast from the same iron. 1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Standard Specification for Cupola Malleable Iron

JIS G 5510:1999 奥氏体铸铁件

この規格は，オーステナイト鋳鉄品(以下，鋳鉄品という。)について規定する。

Austenitic iron castings

ASTM E485-94(1999)e1 通过点到平面技术对高炉铁的光发射真空光谱分析的标准测试方法

Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique

ANSI/ASTM A801/A 801M:1999 铁钴高磁性饱和合金规范

This specification covers two iron-cobalt alloy types currently manufactured and supplied commercially for use in magnetic cores requiring high permeability at and above 15 kG (1.5 T) under d-c and certain a-c conditions. The specific alloy types covered are: Alloy Type Nominal Composition 1 49 % Co, 49 % Fe, 2 % V 2 27 % Co, 0.50 % Cr, balance Fe This specification also covers materials supplied by a pro ducer or converter in the form and physical condition suitable for fabrication into parts that will later be given final heat treatment to achieve the desired magnetic characteristics and where required, mechanical properties. It covers material supplied in form of forging billets, hot-rolled products, cold-finished bars, and strip. The values stated in either customary units (cgs-emu and inch-pound) or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents:therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Specification for Iron-Cobalt High Magnetic Saturation Alloys

ASTM F1466-99(2010) 金属与陶瓷密封用铁镍钴合金

1.1 This specification covers two iron-nickel-cobalt alloys, the former, (UNS No. K94630), containing nominally 29 % nickel, 17 % cobalt, and 53 % iron, the latter, (UNS No. K94620), nominally 27 % nickel, 25 % cobalt and 48 % iron, in the forms of wire, rod, bar, strip, sheet, and tubing, intended primarily for brazed metal-to-ceramic seals with alumina ceramics, for vacuum electronic applications. Unless otherwise indicated, all articles apply to both alloys. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following hazard caveat pertains only to the test method portion, Sections 14 and 16 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications

SANS 9147:1987 生铁．定义和分类

Defines pig-irons and the sub-division of pig-irons into different classes.

Pig-irons - Definition and classification

BS EN 1564:1997 锻造.奥氏体回火的可锻铸铁

This European Standard defines the grades and the corresponding properties of austempered ductile cast irons. This European Standard specifies a classification based on mechanical properties measured on machined test pieces prepared from: - separately cast samples; - cast-on samples; - samples cut from a casting. This standard does not cover technical delivery conditions for austempered ductile cast iron castings, see EN 1559-1 and EN1559-3.

Founding - Austempered ductile cast irons