77.140.01 钢铁产品综合 标准查询与下载

AECMA PREN 2069-4-1994 航空航天系列.锻钢产品检验和试验要求.第4部分:管子的检验与试验要求.第2版

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make hut find it generally acceptable it would be helpful if you would notify US accordingly. Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Inspection and Testing Requirements for Steel Wrought Products Part 4 - Inspection and Testing Requirements for Tubes Aerospace Series Edition 2 [Refer To: ASD-STAN PREN 4235-4]

GOST 7566-1994 金属制品.验收、标志、包装、运输及贮存

Настоящий стандарт устанавливает требования к приемке, маркировке, упаковке, транспортированию и хранению блюмов, слябов, заготовок, в то

Metal products. Acceptance, marking, packing, transportation and storage

NF A00-100:1993 钢及钢制品的一般技术交货要求

General technical delivery requirements for steel and steel products.

DIN EN 10021:1993 钢铁制品的一般交货技术条件; 德文版本 EN 10021:1993

General technical delivery requirements for steel and iron products; German version EN 10021:1993

ANSI/SAE J402-1993 锻钢或轧钢的SAE编号体系

Steel, SAE Numbering Systems for Wrought or Rolled

CNS 8277-1993 再轧碳钢钢料

Rerolled Carbon Steels

ANSI/SAE J1268-1993 碳素钢和合金工字钢的可淬透性带

All carbon and alloy H-band steels are shown, along with their corresponding minimum and maximum hardenability limits, for which sufficient hardenability data have been established and for grades which use the standard end-quench test. As hardenability data are accumulated for other grades, this SAE standard will be revised to include such grades.

Hardenability Bands for Carbon and Alloy H Steels

BOCA CHAPTER 22 NBC-1993 钢

Each of the BOCA National Codes is completely updated and published in a new edition every three years. Code change activity is conducted annually within each three-year edition cycle. The first and second year’s approved changes are published in supple

Steel

BOCA CHAPTER 22 NBC COMM V2-1993 钢

The following is a listing of the standards referenced in this code, the effective date of the standard, the promulgating agency of the standard and the section(s) of this code that refer to the standard.

Steel

CB/T 3433-1992 船用对称型钢尺寸、外形、重量及允许偏差

本标准规定了轧制与焊接T型钢和对称球扁钢的尺寸、外形、截面特征数值、允许偏差、标记及技术参数。 本标准适用于民船、舰艇、军辅船与海洋工程结构物用的高度为50～600 mm的对称型钢，其他结构物亦可参照采用。

Dimensions, shapes, weights and allowable deviations of symmetrical steel sections for ships

AECMA PREN 2157-2-1992 航空航天系列.钢锻坯和锻件 技术规范.第2部分-锻坯.第.第1版

This standard specifies the characteristics of solid rivets, with 100°countersunk reduced head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating, metric series, for maximum operating temperature 315℃.

Aerospace Series Steel Forging Stock and Forgings Technical Specification Part 2 - Forging Stock Edition 1

ISO 10474:1991 钢和钢制品 检验文件

Defines the different types of inspection documents supplied to the purchaser. Shall be used in conjunction with: ISO 404 for steel and steel products; ISO 4990 for steel castings.

Steel and steel products; inspection documents

CNS 12892-1991 纤维混凝土用钢纤维

本标准适用于纤维混凝土用之钢纤维（以下简称钢纤维）。备考：本标准中｛ ｝ 内之数值及单位系国际单位制（SI）。

Steel Fibers for Fiber Reinforced Concrete

AECMA PREN 2003-5-1991 航空航天系列.钢产品测试方法－.第5部分－却贝冲击试验(V型切口).P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Test Methods for Steel Products Part 5 Charpy Impact Test (V Notch) Issue P 1

DIN 50969:1990 高强度结构钢部件耐氢诱导易脆断裂的特性.用支柱试验和预防性测量法进行监测

This standard specifies the requirements of high-strength structural steel components against hydrogen induced embrittle fractures.

Testing of high-strength steel building elements for resistance to hydrogen-induced brittle fracture and advice on the prevention of such fracture

BOCA ARTICLE 18 NBC-1990 钢.第11版

The provisions requiring that the excavation left when an unfit structure has been removed be filled in is an obvious, but often neglected means of protecting the public health and safety.

Steel Eleventh Edition

CNS 12489-1989 烧结不锈钢构件

本标准适用于由不锈钢所制造的烧结构件（以下简称构件）。

Sintered Stainless Steel Structural Parts

CNS 12411-1988 住宅用钢制及铝合金制正门嵌板检验法

本标准规定住宅用钢制及铝合金制正门嵌板 (以下简称嵌板) 之检验方法。

Method of Test for Steel and Aluminum Alloy Door Sets for Entrance of Dwelling

CNS 12413-1988 住宅用金属制横拉式防护门窗检验法

本标准规定住宅用金属制横拉式防护门窗 (以下简称防护门窗) 之检验方法。

Method of Test for Metal Sliding Doors and Windows of Dwellings for Weatherproof

CNS 9704-1988 浪形钢板

本标准适用于建筑、土木、车辆及其它结构，经冷加工成形之浪形钢板。

Steel Decks