77.140.01 钢铁产品综合 标准查询与下载

CNS 9704-1988 浪形钢板

本标准适用于建筑、土木、车辆及其它结构，经冷加工成形之浪形钢板。

Steel Decks

AECMA PREN 2103-2-1988 航空航天系列钢、镍基合金及钴基合金再熔料和铸件-技术规范-.第2部分 - 再熔料.第.第1版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA

Aerospace Series Steel, Nickel Base and Cobalt Base Alloy Remelting Stock and Castings - Technical Specification - Part 2 - Remelting Stock Edition 1

AECMA PREN 2103-3-1988 航空航天系列钢、镍基合金及钴基合金再熔料和铸件-技术规范-.第3部分-试制铸件和产品铸件.第.第1版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted to CEN (European Committee for Standardization) as a draft European Standard

Aerospace Series Steel, Nickel Base and Cobalt Base Alloy Remelting Stock and Castings - Technical Specification - Part 3 - Pre-Production and Production Castings Edition 1

CNS 8740-1988 钢制水桶检验法

本标准规定以镀锌钢板制造（以下简称平板水桶）或以碳化钢薄板制造后镀锌之水桶（以下简称镀锌水桶）试验法。

Method of Test for Steel Buckets

CNS 8739-1988 钢制水桶

本标准适用于以镀锌钢板制造（以下简称平板水桶）或以碳化钢薄板制造后镀锌之水桶（以下简称镀锌水桶）。

Steel Buckets

AECMA PREN 2103-1988 钢镍基和钴基合金重熔模具和铸件交货技术条件.第1部分:基本要求

This «Aerospace series» standard has been drawn up under the responsibility ofAECMA (Association Européenne des Constructeurs de Matériel Aérospatial).

Steel Nickel Base and Cobolt Base Alloy Remelting Stock and Castings - Technical Specification - Part 1 - General Requirements

CNS 3229-1987 机械构造用铬钼钢钢料

本标准适用于经热轧、热锻等制造而成，通常系指供锻造、切削等加工及热处理后使用之机械构造用铬钼钢钢料（以下简称钢料）。

Nickel Chromium Steels for Machine Structural Use

CNS 3230-1987 机械构造用镍铬钢钢料

本标准适用于经热轧、热锻等制造而成，通常系指供锻造、切削等加工及热处理后使用之机械构造用镍铬钢料（以下简称钢料）。

Nickel Chromium Steel for Machine Structural Use

ISO 683-1:1987 热处理钢、合金钢和易切钢 第1部分:按照不同成形的黑钢制件直接硬化的非合金钢和低合金锻钢

Gives the technical delivery requirements for blooms, billets, slabs, bars, wire rod, hot-rolled plates and forgings manufactured from the steels listed in table 3 and supplied in one of the heat-treatment conditions given in table 1 and in one of the surface conditions given in table 2. The steels are in general intended for the fabrication of quenched and tempered or austempered machine part.

Heat-treatable steels, alloy steels and free-cutting steels; Part 1 : Direct-hardening unalloyed and low alloyed wrought steel in form of different black products

JIS G 3111:1987 再轧碳钢

Rerolled carbon steel

SANS 28:1986 空心墙用金属系件

This specification covers the dimensional and material requirements of metal ties suitable for walls having cavity widths of up to the largest likely to be found in masonry walling constructed to dimensionally co-ordinated sizes. NOTE a) The standards referred to in the specification are listed in Appendix A. b) Requirements that must be specified by the purchaser are listed in Appendix B. c) Guidance on the verification of the quality of metal wall ties produced to this specification is given in Appendix C. d) Guidance on the selection and use of metal wall ties is given in Appendix D.

Metal ties for cavity walls

CSA S136.1-M1986-1986 CSA 标准 CAN3-S136-M84 冷弯型钢结构件评论

Commentary on CSA Standard CAN3-S136-M84, Cold Formed Steel Structural Members

AECMA PREN 2079-1986 航空航天系列.耐腐蚀钢制仪器和设备用轴承,精度滚珠 法兰尺寸和重量 P.第1版

This standard is initially published on green paper for the needs of AECMA-Members.

Aerospace Series Bearings, Precision Ball, in Corrosion Resisting Steel, for Instruments and Equipments, with Flange Dimensions and Loads Issue P 1

AECMA PREN 2135-1986 航空航天系列.FE-PL61渗碳,淬火,调节钢板材De小于或等于40mm P.第1版

This standard specifies the characteristics of miniature two lug, reduced series, incramental counterbored floating anchor nuts, with a self-locking feature achieved by forming the upper portion out-of-round, in heat resisting steel, MoS2 lubricated.

Aerospace Series Steel FE-PL61 Carburized, Hardened and Tempered Bar De Less Than or Equal to 40 mm Issue P 1

CNS 11513-1986 不锈钢壶

本标准适用于 3 公斤以下盛茶水之不锈钢壶。

Stainless Steel Kettle

CNS 2946-1986 汽车用灯泡检验法

本标准规定 CNS 2945 汽车用灯泡之检验方法。

Method of Test for Automotive Lamp Bulbs

CAN 3-S136-M84-1984 冷弯型钢支撑元件

Traite du calcul aux états limites des éléments de charpente porteurs utilisés dans les bâtiments et fabriqués par formage à froid à partir de tôles, de feuillards ou de plaques, d'une épaisseurs allant jusqu'à 25 mm, en acier au carbone ou en acier faiblement alliés. En ce qui a trait à l'application de la norme au calcul des éléments de charpente formés à froid utilisés dans d'autres structures, l'utilisateur y trouvera des spécifications supplémentaires, au besoin, qui tiennent compte des différences dans les charges structurales et de leurs effets, de l'environnement et d'autres conditions de service.

Cold-formed steel supporting elements

CNS 3378-1985 矿坑用电机具防爆构造试验法

本标准规定 CNS 2867 矿坑用电机具防爆构造之试验方法。

Method of Test for Explosion-proof Constructions of Electric Machineries and Apparatuses of Mines

CNS 3228-1985 电动刮胡刀

本标准适用于，由电动机或电磁振动器驱动之交流式、充电式、干电池式及其组合式之电动刮胡刀（以下简称为电胡刀）。

Electric Shavers

AECMA PREN 2160-1985 航空航天系列.飞机控制镀锌碳钢板构造软电缆尺寸和承重2版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-2.

Aerospace Series Flexible Wire Ropes for Aircraft Controls in Zinc Coated Carbon Steel Construction - Dimensions - Loads Edition 2