77.140.01 钢铁产品综合 标准查询与下载

AECMA PREN 2080-1985 航天航空飞机控制装置的预成形可弯曲钢丝绳建筑尺寸承重2版

This industrial Standard for the aerospace sector has been drawn up under the responsibilit of AECMA.

Aerospace Series Flexible Wire Ropes for Aircraft Controls in Corrosion Resisting Steel - Construction - Dimensions - Loads Edition 2

CNS 10263-1983 钢铁之机械法镀锌

本标准适用于钢铁之机械镀锌及检验。

Coatings of Zinc Mechanically Deposited on Iron and Steel

CNS 9871-1983 不锈钢包层钢

本标准适用于压力容器、锅炉、热交换器，核子反应器及储槽等所使用厚度在 8 mm 以上，母材为钢料，外覆层材料为不锈钢之轧延包层钢、爆炸接合包层钢、爆炸接合轧延包层钢、迭层熔接 (build-up welded, overlay welded ) 轧延包层钢，铸造轧延包层钢及迭层熔接包层钢 (以下简

Stainless-Clad Steel

AECMA PREN 2023-1982 航空航天系列.防腐蚀钢制轴承,关节轴承自润滑正规级数尺寸和负荷2版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Europhnne des Constructeurs de Matériel Aérospatial). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted to CEN (European Committee for Standardization) as a draft European Standard.

Bearings, Spherical Plain in Corrosion Resisting Steel with Self Lubricating Liner Normal Series Dimensions and Loads Aerospace Series Edition 2

AECMA PREN 2022-1982 航空航天系列.防腐蚀钢制轴承,关节轴承自润滑线性级数尺寸和负荷2版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). * It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted to CEN (European Committse for Standardization) as a draft European Standad.

Bearings, Spherical Plain in Corrosion Resisting Steel with Self Lubricating Liner Light Series Dimensions and Loads Aerospace Series Edition 2

AECMA PREN 2019-1982 航空航天系列.航空轴承 单列钢镉涂层轴承直径系列3和4 尺寸和负荷 3版

This draft is now available for public comment and your views and technical comments on it muld be appreciated. Ifyou have no specific comments to make but fmd it generally acceptable it muld be helpfu! if you mould notify us accordingly Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Bearings-Airframe Rolling Single Row Self Aligning Roller Bearings in Steel Cadmium Plated Diameter Series 3 and 4 Dimensions and Loads Aerospace Series Edition 3

AECMA PREN 2017-1982 航空航天系列.航空轴承 单列防腐蚀钢制凹槽球轴承 直径系列2 尺寸和负荷 3版

Thisindustrialstandard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted to CEN (European Committee for Standardization) as a draft European Standard.

Bearings-Airframe Rolling Double Row Self Aligning Ball Bearings in Corrosion Resisting Steel Diameter Series 2 Dimensions and Loads Aerospace Series Edition 3

AECMA PREN 2016-1982 航空航天系列.航空轴承 单列钢镉涂层轴承直径系列2 尺寸和负荷 3版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted to CEN (European Committee for Standardization) as a draft European Standard

Bearings Airframe Rolling Double Row Self Aligning Ball Bearings in Steel Cadmium Plated Diameter Series 2 Dimensions and Loads Aerospace Series Edition 3

AECMA PREN 2010-1982 航空和航天 航空轴承 单列钢制凹槽球轴承 直径系列8和9尺寸和负荷 3版

This standard specifies the characteristics , of rigids ing l e row b a l l bearings of diameter series 8 and 9 l ) , d e s I g n e d t o withstand only slow r o t a t I o n s and o s c I l l a t I o n s under load. They a r e in'tended for use between fixed and moving p a r t s of t h e a I r - c r a f t s t r u c t u r e and t h e I r c o n t r o l mechanisms.

Bearings-Airframe Rolling Rigid Single Row Ball Bearings in Steel Cadmium Plated Diameters Series 8 and 9 Dimensions and Loads Aerospace Series Edition 3

AECMA PREN 2013-1982 航空和航天 航空轴承 单列钢制凹槽球轴承 直径系列0和2尺寸和负荷 3版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on yell0 w paper in three equivalent versions (English, french, German). It will be submitteà to CEN (European Committee for Standardization) as a draft European Standard.

Bearings-Airframe Rolling Rigid Single Row Ball Bearings in Steel Cadmium Plated Diameter Series 0 and 2 Dimensions and Loads Aerospace Series Edition 3

AECMA PREN 2015-1982 航空和航天 航空轴承 单列钢制凹槽球轴承 直径系列2 尺寸和负荷 3版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA

Bearings-Airframe Rolling Double Row Self Aligning Ball Bearings in Steel Diameter Series 2 Dimensions and Loads Aerospace Series Edition 3

AECMA PREN 2139-1982 航空航天系列.平垫圈耐热钢.第1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Washers, Flat, Heat Resisting Steel Aerospace Series Edition 1

AECMA PREN 2138-1982 航空航天系列.平钢垫圈.第1版

This standard specifies the characteristics of flat steel shers for use I n aircraft applications , at temperatures below 235 'c. They are intended f o r use primarily underneath nuts, heads the compatibility must be checked.

Washers, Flat, Steel Aerospace Series Edition 1

ISO 404:1981 钢和钢制品.一般交货技术要求

Steel and steel products — General technical delivery requirements

AECMA PREN 2133-1981 航空航天系列.用钢镉镀层铜和铜合金最大拉力小于或等于1450 MPa(C7/SC4/D)

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial).

Cadmium Plating of Steels with Maximum Specified Tensile Strength Less Than or Equal to 1450 MPa and Copper and Copper Alloys (C7/SC4/D)

AECMA PREN 2137-1981 航空航天系列.FE-PL75钢板材强度1100MPa小于或等于Rm小于或等于1250 Mpa,棒材De小于或等于100mm.第1版

The text of this standard , whick exists in thress equivalent versions has been drawn up under the responsibility of AECMA and has been circulated to Official Services. Any reservations expressed by Official Services and not resolved in this issue, have been incorporated in the history sheet which has accompanied this prEN to CEN.

Steel FE-PL75 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa Bars De Less Than or Equal to 100 mm Aerospace Series Edition 1

GOST 7566-1981 金属制品 验收、标志、包装、运输及贮存

Steel. General rules for acceptance, packaging, marking and certification of comlience

CNS 2698-1980 漆布绝缘电线

本标准适用电气器具出口线所用之漆布包扎绝缘电线（以下简称漆布绝缘电线）。

Varnish Cloth Insulated Wire

AECMA PREN 2170-1980 航空航天系列.耐热钢 FE-PA91-HT溶液处理焊接环用板和带a小于或等于3mm.第1版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-2.

Heat Resisting Steel FE-PA91-HT Solution Treated Sheets and Strips a Less Than or Equal to 3 mm Aerospace Series Edition 1

AECMA PREN 2064-1980 航空航天系列.飞机机架滚动轴承耐腐蚀钢制自润滑线性级数技术规范.第1版

The text of this standard, which exists in three equivalent versions (English, French, German) has been drawn up under the responsability of A ECMA (Association Européenne des Constructeurs de Matériel Aérospatial) and has been circulated to Official Services. Any reseniations expressed by Official Services and not resolved in this issue, have been incorporated in the history sheet which has accompanied this prEN to CEN.

Bearings Spherical Plain in Corrosion Resisting Steel with Self Lubricating Liners Technical Specification Aerospace Series Edition 1