77.140.01 钢铁产品综合 标准查询与下载

YB/T 4829-2020 钢板镀层质量试验方法 在线X射线荧光法

Steel plate coating quality test method online X-ray fluorescence method

T/CAMT 6-2020 《钢板剪切加工中心建设与管理规范》

1  范围   2  规范性引用文件  3  术语和定义  4  加工中心建设要求 4.1  一般要求   4.2  项目可行性研究  4.3  选址 4.4  功能要求  4.5  工艺布局 4.6  建筑要求 4.7  设备设施要求   4.8  厂区环境   4.9  建设项目管理要求 5  加工中心加工管理    5.1  一般要求    5.2  制度规范   5.3  作业运行   5.4  客户服务  附录A  加工中心典型工艺布局 附录B  中心设备采购、安装、调试以及验收要点  附录C  建设项目各阶段展开工作 附录D  项目土建招标所需准备资料清单 附录E  建设项目基建资料归档清单 附录F  建设项目设备资料归档清单 附录G  加工中心各类安全规范图示 附录H  热轧剪切产品常用包装方式和适用产品 附录I  冷轧剪切产品常用包装方式和适用产品

Code for Construction and Management of Steel Plate Shearing Processing Center

T/SSEA 0069-2020 棒材弯曲度测量方法

本标准规定了棒材弯曲度的测量对象、测量工具、 测量平台、 测量方法、测量结果计算及测量报告。 本标准适用于热轧钢棒（以下简称棒材）弯曲度的测量与评价。不适用于“S”型弯曲、扭转型弯曲的测量。 锻制棒材、冷拉棒材、冷拔棒材弯曲度的测量可参考使用本标准。

Measuring method of bending degree of bar

T/XJJSXH 02-2020 建筑用钢渣砂

本标准规定了建筑用钢渣砂的术语和定义、规格, 普通预拌砂浆用钢渣砂、膨胀聚苯板薄抹灰外墙外保温系统中抹面砂浆和粘接剂使用的钢渣砂、水泥混凝土路面用钢渣砂、道路面层（水泥混凝土面层和沥青混凝土面层）和基层（包括底基层）混合料用砂、混凝土多孔砖和路面砖、路缘石、路平石、立缘石、平缘石、护坡石用钢渣砂的技术要求、试验方法、检验规则、包装、标志、储存、运输和质量证明书等。

Steel slag sand for building

ASTM A1039/A1039M-20 用双辊铸造工艺生产的高强度低合金和超高强度的工业用结构热轧碳素钢薄板的标准规范

1.1 This specification covers commercial, structural, highstrength low-alloy, and ultra-high strength steel sheet in coils and cut lengths produced by the twin-roll casting process. 1.2 The steel sheet is available in the designations listed in Section 4. 1.3 The material is available in the following sizes: Thickness: 0.027 to 0.078 in. [0.7 to 2.0 mm] Width: up to 79 in. [2000 mm] 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. NOTE 1—A description of the Twin-roll Casting Process is included in Appendix X1. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process

ASTM A1008/A1008M-20 高强度低合金高强度低合金高强度低合金冷轧碳素钢薄板标准规范

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Har

ASTM E2972-15(2019) 金属 矿石和其他相关材料的内部参考材料的生产 测试和价值指定标准指南

1.1 This document provides guidance for the implementation of procedures for preparation of in-house reference materials for analytical testing of metals, ores, slags, and other materials encountered within the metals and mining industries. 1.2 This guide is applicable to the production of reference materials only (usually for internal use) and does not apply to the production of certified reference materials (CRMs). Materials may include metals, alloys, minerals, geological materials, manufacturing intermediates, and byproducts. Samples may be in a number of physical forms including blocks, disks, rods, wires, chips, granules, powders, and liquids. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials

ASTM A1080/A1080M-19 钢 不锈钢及相关合金铸件热等静压的标准实践

1.1 This practice covers general requirements for hot isostatic pressing (HIP) of steel, stainless steel, and related alloy castings. 1.2 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

ASTM A1039/A1039M-19 双辊铸轧工艺生产的工业结构和高强度低合金热轧碳素钢薄板的标准规范

Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

T/CISA 008.3-2019 钢铁产品质量能力分级规范 第3部分：焊接材料

焊接材料产品及其生产线和企业质量能力分级的术语和定义、分级数据集、分级计算和分级方法

Specification for quality reliability ranking of steel products Part 3：Welding materials

T/CISA 008.2-2019 钢铁产品质量能力分级规范 第2部分：船体结构用钢板

船体结构用钢板产品及其生产线质量能力分级的术语和定义、分级数据集、分级计算和分级方法

Specification for quality reliability ranking of steel products Part 2：Ship-hull steel plate

T/CISA 008.1-2019 钢铁产品质量能力分级规范 第1部分：通则

钢铁及其相关产品质量能力分级的术语和定义、分级数据集、分级计算和分级方法。

Specification for quality reliability ranking of steel products Part 1：General rules

ASTM F3277-19 拘留和教养设施用悬臂式钢铺位的标准规范

1.1 This specification provides five test methods suitable for assessing the safety and performance characteristics of cantilevered steel bunks for detention and correctional facilities. 1.2 These test methods address impact from the top of the bunk, the application of a static force from the top, sides, in various directions, and a force applied from the bottom of the bunk. 1.3 The forces applied simulate those that are foreseeable from abuse by up to two individuals. 1.4 The tests are intended to be used to aid in identifying the appropriate level of physical security associated with various configurations of cantilevered bunk design. 1.5 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities

KS D 3865-2018(2023) 建筑结构用耐火钢

Fire resistance steels for building structure

KS D 3865-2018 耐火性钢建筑结构

Fire resistance steels for building structure

T/SSTA 0001-2018 工程桩用钢管和配件

本标准规定了用于基建工程的桩用钢管和配件的尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。

Steel Tubing and Fittings for Engineering Piles

ASTM A1010/A1010M-13(2018) 高强度马氏体不锈钢板 板材和带材的标准规格

1.1 This specification covers martensitic stainless steels for various structural, architectural, pressure vessel, and heatresisting applications. The mechanical properties of these steels are customarily, but not necessarily, developed by a suitable heat treatment generally referred to as tempering. 1.2 Steel products under this specification are available in two grades: Grade Yield Strength, min, ksi [MPa] 40 [275] 40 [275] 50 [345] 50 [345] 1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness of plates furnished under this specification to 2 in. [50 mm]. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

ASTM A1008/A1008M-18 钢 板 冷轧 碳 结构 高强度低合金 成型性提高的高强度低合金 溶液硬化和烘烤硬化的标准规范

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

T/CFA 0402.1-2018 水冷金属型离心球墨铸铁管管模使用维护保养规则

本标准规定了水冷金属型离心球墨铸铁管管模使用维护保养的术语和定义、技术条件的规范应用、管模使用流程中的维护保养、管模拔管参数、待机管模的维护保养、管模的存储、其他要求、管模使用数据库和培训管理。 本标准适用于水冷金属型离心铸造球墨铸铁管管模（以下简称管模）的使用维护保养。

Water-cooled metal type centrifugal ductile iron pipe mold use and maintenance rules

T/CFA 02010124.1-2018 风电用球墨铸铁件订货技术条件

铸件材料牌号要求应根据需方订货要求，选择本标准规定的材料牌号： QT400-18AL：适用于环境温度-20℃～+50℃ QT400-18AL-1：适用于环境温度-30℃～+50℃ QT400-18AL-2：适用于环境温度-40℃～+50℃ QT350-22AL：适用于环境温度-40℃～+50℃ QT700-2A：适用于环境温度-20℃～+50℃ 化学成分见表1，不作为验收依据，数据仅供参考。如需方对铸件有特殊要求时，材料的化学成分 由供需双方协商确定。 表1 化学成分要求       化学成分 材料　C%　Si%　Mn%　P%　S%　Re%　Mg% QT400-18AL　3.6-3.9　1.8-2.4　≤0.30　≤0.04　≤0.020　≤0.02　0.03-0.06 QT400-18AL-1　3.6-3.9　1.8-2.3　≤0.25　≤0.04　≤0.020　≤0.02　0.03-0.06 QT400-18AL-2　3.6-3.9　1.8-2.2　≤0.20　≤0.04　≤0.020　≤0.02　0.03-0.06 QT350-22AL　3.6-3.9　1.7-2.1　≤0.20　≤0.04　≤0.020　≤0.02　0.03-0.06 QT700-2A　3.6-3.8　2.0-2.4　0.30-0.60　≤0.04　≤0.020　≤0.02　0.03-0.06 表3  单铸试块拉伸性能及硬度 材料牌号　抗拉强度Rm MPa(min)　屈服强度Rp0.2 MPa (min)　伸长率A %（min）　布氏硬度（HBW） QT400-18AL　400　240　18　130-180 QT400-18AL-1　400　240　18　130-180 QT400-18AL-2　400　240　18　130-180 QT350-22AL　350　220　22　130-180 QT700-2A　700　420　2　225-305 表4 单铸试块夏比冲击功 材料牌号　最小冲击功 J 　(-20±2)℃　(-30±2)℃　(-40±2)℃ 　三次试验 平均值　单个值　三次试验 平均值　单个值　三次试验 平均值　单个值 QT400-18AL　12　9　—　—　—　— QT400-18AL-1　—　—　12　9　—　— QT400-18AL-2　—　—　—　—　12　9 QT350-22AL　—　—　—　—　12　9 QT700-2A　不需要冲击性能要求

The customer's technical condition of spheroidal graphite cast iron for wind power