77.140.01 钢铁产品综合 标准查询与下载

SANS 31:2007 金属产品．检验证书种类

Specifies the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e.g. plates, sheets, bars, forgings, castings, whatever their method of productio

Metallic products - Types of inspection documents

BS EN 10021:2006 钢制品的一般技术交货要求

This European Standard specifies the general technical delivery conditions for all steel products covered by EN 10079 with the exception of steel castings and powder metallurgical products. Where the delivery requirements agreed for the order or specified in the appropriate product specification differ from the general technical delivery conditions defined in this European Standard, then the requirements agreed for the order or specified in the appropriate product specification apply. NOTE Inspection documents are covered by EN 10168 and EN 10204.

General technical delivery requirements for steel products

LST EN 10021-2007 钢材交货通用技术条件

General technical delivery conditions for steel products

BS EN 10021:2007 钢制品的一般技术交货要求

General technical delivery requirements for steel products

ASTM A1012-02(2007) 无缝和焊接铁素体 奥氏体和双相合金钢冷凝器和带有整体式金属丝的热交换管的标准规范

Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

DIN EN 10021:2007 钢铁制品的一般交货技术条件

This European Standard specifies the general technical delivery conditions for all steel products covered by EN 10079 with the exception of steel castings and powder metallurgical products. Where the delivery requirements agreed for the order or specified in the appropriate product specification differ from the general technical delivery conditions defined in this European Standard, then the requirements agreed for the order or specified in the appropriate product specification apply. NOTE Inspection documents are covered by EN 10168 and EN 10204.

General technical delivery conditions for steel products; English version of DIN EN 10021:2007-03

AWS G2.4/G2.4M-2007 钛和钛合金熔焊指南

Selection of the correct fillet weld size is essential for the satisfactory performance of many weldments in service today. Fillet welds are used in virtually every industry, and when properly designed, provide effective and efficient connections

Guide for the Fusion Welding of Titanium and Titanium Alloys

CNS 8277-2006 再轧碳钢钢料

本标准适用于再轧碳钢之钢棒、扁钢及等边角钢

Rerolled carbon steel

CNS 2473-2006 一般结构用轧钢料

本标准适用于建筑、桥梁、船舶、车辆及其它结构物所用之一般结构用热轧钢料

Rolled steels for general structure

ASTM A1008/A1008M-06a 钢 板 冷轧 碳 结构 高强度低合金 成型性提高的高强度低合金 溶液硬化和烘烤硬化的标准规范

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

BS EN 10021:2006(2007) 钢材交货通用技术要求

General technical delivery requirements for steel products

EN 10021:2006 钢制品的一般技术交货要求

This European Standard specifies the general technical delivery conditions for all steel products covered by EN 10079 with the exception of steel castings and powder metallurgical products.Where the delivery requirements agreed for the order or specified in the appropriate product specification differ from the general technical delivery conditions defined in this European Standard, then the requirements agreed for the order or specified in the appropriate product specification apply.NOTE Inspection documents are covered by EN 10168 and EN 10204.

General technical delivery conditions for steel products

KS D ISO 1052-2005(2010) 一般工程用钢

Steels for engineering purposes

ASTM A1008/A1008M-05a 钢 板 冷轧 碳 结构 高强度低合金 成型性提高的高强度低合金 溶液硬化和烘烤硬化的标准规范

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

SAE J402-2005 锻钢或轧制钢用新钢命名系统

This SAE Standard describes a new alphanumeric designation system for wrought steel used to designate wrought ferrous materials, identify chemical composition, and any other requirements listed in SAE Standards and Recommended Practices.

New Steel Designation System for Wrought or Rolled Steel

JIS G 3111:2005 半成品碳钢

この規格は，再生鋼材の棒鋼，平鋼及び等辺山形鋼(以下，鋼材という。)について規定する。

Rerolled carbon steel

DS-håndbog 111.2.1:2005 钢铁 第 2.1 部分：结构钢的热轧产品

This handbook for iron and steel includes standards for hot rolled products of structural steels.

Iron and steel - Part 2.1: Hot rolled products of structural steels

DS/EN 10025-2:2005 结构钢的热轧产品 第2部分：非合金结构钢的技术交货条件

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 to 6 (chemical composition) and Tables 7 to 9 (mechanical properties) in the delivery conditions as given in 6.3.

Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

DS/EN 10025-1:2005 结构钢热轧产品 第1部分：一般技术交货条件

This document specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1 of this document specifies the general delivery conditions.

Hot rolled products of structural steels - Part 1: General technical delivery conditions

DS/EN 10025-3:2005 结构钢热轧产品 第3部分：正火/正火轧制可焊接细晶粒结构钢的交货技术条件

Part 3 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled delivery condition in the grades and qualities given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) in thickness 250 mm for grades S275, S355 and S420 and in thickness 200 mm for grade S460.

Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels