77.140.70 型钢 标准查询与下载

ASTM A276-10 不锈钢钢筋和型材的标准规范

1.1 This specification covers hot-finished or cold-finished bars except bars for reforging (Note 1). It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. The free-machining types (Note 2) for general corrosion resistance and high-temperature service are covered in a separate specification. Note 18212;For bars for reforging, see Specification A314. Note 28212;For free-machining stainless bars designed especially for optimum machinability, see Specification A582/A582M. Note 38212;There are standards covering high nickel, chromium, austenitic corrosion, and heat resisting alloy materials. These standards are under the jurisdiction of ASTM Subcommittee B02.07 and may be found in Annual Book of ASTM Standards, Vol. 02.04. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Stainless Steel Bars and Shapes

KS D 3589-2009 聚乙烯镀层钢管

이 표준은 가스, 기름, 물 등의 수송에 사용하는 것으로서, 주로 지중1) 매설용의 바깥면

Extruded polyethylene coated steel pipes

JIS G 3350:2009 总体结构用轻量型钢

This Standard specifies the cold formed light gauge steel sections for bildings and other structure (hereafter referred to as "light gauge sctions").

Light gauge steel sections for general structure

DIN 1026-1:2009 热轧钢槽 第1部分:锥形法兰钢槽 尺寸、重量和截面性能

Hot rolled steel channels - Part 1: Taper flange steel channels - Dimensions, masses and sectional properties

KS D 3608-2009 自来水用环氧树脂粉内外层涂覆钢管

이 표준은 최고 사용압력 1 MPa1) 이하의 수도에 사용하는 에폭시 수지분체 내외면 코팅

Steel pipes coated on the interior and exterior with epoxy powder coatings for water works

KS D 3608-2009(2014) 内和外水厂环氧树脂粉末涂料的钢管

Steel pipes coated on the interior and exterior with epoxy powder coatings for water works

KS D 3869-2009 钢筋混凝土钢筋弯曲和切割

이 표준은 철근 콘크리트용 봉강의 기계에 의한 공장가공에 대하여 규정한다.비고

Bending and cutting of steel bars for reinforced concrete

KS D 3869-2009(2019) 钢筋混凝土用钢筋的弯曲和切割

Bending and cutting of steel bars for reinforced concrete

KS D 3694-2009 热轧不锈钢等边角钢

이 표준은 열간 압연 스테인리스강 등변 ㄱ형강(이하 형강이라 한다.)에 대하여 규정한다.

Hot rolled stainless steel equal leg angles

KS D 3596-2009(2019) 预涂颜色镀锌钢丝

Precoated color zinc-coated steel wires

DIN 1025-1:2009 热轧工字钢 第1部分:I系列窄法兰工字钢 尺寸、重量、截面性能

This standard applies to hot-rolled narrow flange I-beams (I-serie).

Hot rolled I-sections - Part 1: Narrow flange I-sections, I-series - Dimensions, masses, sectional properties

KS D 3564-2009 高压排管用碳素钢管

이 표준은 350 ℃ 정도 이하에서 사용 압력이 높은 배관에 사용하는 탄소 강관(이하 관이

Carbon steel pipes for high pressure service

KS D 3562-2009 压力排管用碳素钢管

이 표준은 350 ℃ 정도 이하에서 사용하는 압력 배관에 쓰이는 탄소 강관(이하 관이라 한

Carbon steel pipes for pressure service

KS D 3517-2008(2018)(英文版) 机械结构用碳钢管

Carbon steel tubes for machine structural purposes

KS D 3517-2008(2018) 机械结构用碳钢管

Carbon steel tubes for machine structural purposes

KS D 3517-2008 机械结构用碳素钢管

이 표준은 기계, 자동차, 자전거, 가구, 기구, 기타 기계 부품에 사용하는 탄소 강관(이

Carbon steel tubes for machine structural purposes

KS D 3517-2008(2023) 机械结构用碳钢管

Carbon steel tubes for machine structural purposes

KS D 3585-2008 不锈钢卫生管道

이 표준은 낙농, 식품 공업 등에 사용하는 스테인리스강 위생관(이하 관이라 한다.)에 대하

Stainless steel sanitary tubing

GSO ISO 24314:2008 结构钢 抗震性能提高的建筑物用结构钢 技术供应要求

This International Standard specifies qualities for seismic-purpose structural steels. This International Standard applies to steel plates with thicknesses of 6 mm or over and up to 125 mm, wide flats and hot-rolled sections, which are used in the as-delivered condition and normally intended for bolted, riveted or welded structures 1). It does not include the following steels, certain of which are covered by other International Standards, namely: ? structural steels (ISO 630); ? steels for general engineering purposes (ISO 1052); ? high-yield-strength flat steel products (ISO 4950-1, ISO 4950-2 and ISO 4950-3); ? high-yield-strength steel bars and sections (ISO 4951-1, ISO 4951-2 and ISO 4951-3); ? structural steels with improved atmospheric corrosion resistance (ISO 4952); ? high-yield-strength steel plates and wide flats for cold forming (ISO 6930-1 and ISO 6930-2).

Structural steels - Structural steels for building with improved seismic resistance - Technical delivery conditions

JC/T 1091-2008 预应力钢筒混凝土管接头用型钢

本标准规定了预应力钢筒混凝土管接头用型钢的代号与标记、横截面形状、尺寸及允许偏差、一般要求、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于以碳素结构钢为母材经热轧或碳素结构钢热轧厚钢板为母材经冷轧加工用于预应力钢筒混凝土管接头的型钢。

The joint ring steel for prestressed concrete cylinder pipe