特殊用管钢标准-分析测试百科网

T/SSEA 0118.3-2021 双金属复合钢管第3部分复合板卷制焊接钢管

本文件规定了双金属复合板卷制焊接钢管（以下简称复合钢管）的术语和定义、符号和代号、缩略语、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。本文件适用于制造直径200mm~1422mm输送腐蚀流体介质的承压管线或工艺管道的复合板卷制焊接复合钢管（以下简称复合钢管）。

Bi-metal composite pipe.part3: clad plate rolled and welded steel pipe

ICS: 77.140.75
CCS: C314
发布: 2021-07-30
实施: 2021-08-07

T/SSEA 0118.1-2021 双金属复合管第1部分：衬里复合无缝钢管

本文件规定了双金属衬里复合无缝钢管的术语和定义、符号和代号、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本文件适用于制造直径76mm~508mm、钢管内表面耐蚀层厚度2mm及以上，输送腐蚀流体介质的承压管线或工艺管道用衬里复合无缝钢管（以下简称复合管）。

Bi-metal composite pipe. Part1: Lined seamless steel pipe

ICS: 77.140.75
CCS: C314
发布: 2021-07-30
实施: 2021-08-07

PN-EN 10217-5-2019-06 P 压力用途焊接钢管交货技术条件第5部分：具有规定高温性能的埋弧焊非合金和合金钢管

Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties

ICS: 77.140.75
CCS
发布: 2021-07-28
实施: 2021-07-28

GSO ISO 9349:2021 球墨铸铁管、管件、配件及其接头热预绝缘产品

ISO 9349:2017 specifies the requirements and test methods applicable to preinsulated ductile iron pipes, fittings, accessories and their joints for the construction of pipelines (or parts thereof): - to convey water (e.g. potable water), wastewater and other liquids; - to be operated with or without pressure; - to be installed below or above ground; - to limit temperature variations of the conveyed fluids. These pipelines are mainly used to prevent the water to be conveyed from freezing by providing external insulation. NOTE 1 In this document, all pressures are relative pressures expressed in bars[1]). ISO 9349:2017 gives, in addition to the specifications of the existing International Standards for the conveying ductile iron pipes and fittings, specifications for materials, dimensions and tolerances, mechanical and thermal properties of the thermal insulation layer and external casing of preinsulated ductile iron pipes, fittings and accessories. ISO 9349:2017 covers preinsulated ductile iron pipes, fittings and accessories of a size range extending from DN 60 to DN 600 inclusive, which are as follows: - manufactured with socketed, flanged or spigot ends for jointing by means of various types of gaskets which are not within the scope of this document; - preinsulated in the works (excluding on site application of the insulation layer and/or the casing); - normally delivered internally and externally coated; - intended for fluid temperatures from 0 °C to 50 °C, excluding frost. NOTE 2 Other applications are possible by agreement between manufacturer and purchaser. [1]) 100 kPa = 1 bar.

Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products

ICS: 77.140.75
CCS
发布: 2021-07-01
实施

GSO ISO 12633-2:2021 非合金钢和细晶粒钢热精加工空心结构型钢第2部分：尺寸和截面性能

ISO 12633-2:2011 specifies the tolerances for hot-finished circular, square and rectangular structural hollow sections, and gives the dimensions and sectional properties for a range of standard sizes.

Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 2: Dimensions and sectional properties

ICS: 77.140.75
CCS
发布: 2021-07-01
实施

GSO ISO 12633-1:2021 非合金钢和细晶粒钢热精加工空心结构型钢第1部分：交货技术条件

ISO 12633-1:2011 specifies the technical delivery requirements for hot-finished hollow sections of circular, square or rectangular form. It is applicable to hollow sections formed hot with or without subsequent heat treatment or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot-formed product. Fine grain steels are generally delivered in the normalized condition. ISO 12633-1:2011 gives the grades, chemical composition and mechanical properties for non-alloy steels and fine grain steels.

Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

ICS: 77.140.75
CCS
发布: 2021-07-01
实施

LST EN 10217-7-2021 压力用焊接钢管交货技术条件第7部分：不锈钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

ICS: 77.140.75
CCS
发布: 2021-06-30
实施: 2021-06-30

LST EN 10216-5-2021 压力用无缝钢管交货技术条件第5部分：不锈钢管

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

ICS: 77.140.75
CCS
发布: 2021-06-30
实施: 2021-06-30

LST EN ISO 11960:2021 石油和天然气工业用作井套管或油管的钢管（ISO 11960:2020）

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)

ICS: 77.140.75
CCS
发布: 2021-06-30
实施: 2021-06-30

T/CNEA 101.31-2021 压水堆承压部件材料第31部分：常温和低温用电熔化焊公称管

本文件是T/CNEA 101《压水堆承压部件材料》的第31部分。本文件共计13章，其中，1-3章为规范性条款，4-13章为压水堆承压部件材料第31部分：常温和低温用电熔化焊公称管主要内容。主要内容包括：订货要求、制造、批、化学成分、力学性能、射线检测、返修、尺寸、质量和允许偏差、工艺质量、表面质量和外观和产品标志。

PWR pressure boundary components—Material— Part 31:Electric-fusion welded pipe for atmospheric and lower temperatures

ICS: 77.140.75
CCS: D441
发布: 2021-06-28
实施: 2022-03-31

T/CNEA 101.30-2021 压水堆承压部件材料第30部分：低温用无缝和焊接公称钢管

本文件是T/CNEA 101《压水堆承压部件材料》的第30部分。本文件共计13章，其中，1-3章为规范性条款，4-13章为压水堆承压部件材料第30部分：低温用无缝和焊接公称钢管主要内容。主要内容包括：订货要求、通用要求、制造、化学成分、力学性能和工艺性能、复试、尺寸和公差、工艺质量、表面质量和外观、液压试验或无损检测和标志。

PWR pressure boundary components—Material— Part 30:Seamless and weld pipes for low-temperature applications